couples group

Chronic Illnesses and Diet part 1

Chronic illnesses are frequently the result of a web of interrelated factors. Your body may be reacting to a germ, an allergen or a toxin or you may be deficient in a vital nutrient. And the whole situation may be complicated by insulin resistance. It’s unrealistic to think that finding and treating just one piece of the puzzle will be sufficient to remedy the problem. Restoring balance is a more realistic approach.

Balance and Health

Balance is a key concept in most alternative medical approaches to health, such as traditional Chinese medicine, naturopathy, homeopathy and Ayurveda. One of the problems that mainstream medicine has with these alternative medical systems is that the practitioners appear to offer the same remedy for all sorts of illnesses. This doesn’t seem right to doctors trained to think that there are a certain number of discrete diseases that exist in nature. Physicians have also been taught that for each disease there is a distinct treatment. We know, for example, that if you have a strep throat or pneumonia a particular antibiotic is the right treatment, while another antibiotic is appropriate for your urinary tract infection because a different germ is involved. If you burn your finger or you break your arm, the treatment is again going to be designed for the specific problem that you have.

Diet Start

There is certainly some truth to the idea that specific illnesses or conditions need precise, individualized treatments. But there is another valid argument to be made as we move away from acute ailments to focus on the increasing prevalence of chronic illnesses. Sometimes the symptoms of a chronic illness can be suppressed with drugs, but since the cause of the disease is unknown, an individualized remedy to cure the person is out of the question. When an alternative medical practitioner recommends a generalized strategy that is not necessarily aimed at the distinct disease but is more directed at correcting imbalance, these approaches are designed to get to the underlying causes rather than the individual symptoms.

If you are in pain, it’s hard to believe in a treatment unless it works right away. Dietary changes and other generalized strategies, like the Body Clock Prescription, usually do not produce instant relief. These measures do sometimes take effect quickly, but it’s frequently a slower process. I think you will be more motivated if you understand what lies behind much chronic illness.

Rhythmic Disturbances May Underlie Many Chronic Illness

As researchers continue to elucidate the mysteries of the scientific basis of disease, we realize more and more that similar fundamental mechanisms underlie much chronic illness. These include abnormalities of cell membranes and their capacity to send and receive messages, the backfiring of chemistry designed for cellular defense (autoimmunity and inflammation) and ‘sparks’ from your own metabolic fire, environmental radiation and chemical pollutants (oxidative damage). This is why a generalized strategy to treat chronic illness is beneficial.

To this list I would add dyschronism or the failure to keep the various cadences of the body’s biochemical activities in harmony. Disharmony is the direct cause of jet lag, symptoms related to shift work and some sleep disturbances. But having your body in disharmony is also likely to bring out the worst in you more readily than if your body is well tuned. Poor tuning contributes indirectly to the expression of other illnesses, as indicated by the tendency for many ailments to have their own characteristic time peak of maximum intensity. There is evidence to support the idea that there is a rhythmic component in a number of diseases; among the most significant findings related to dyschronism are the following:

Seasonal affective disorder is a form of depression directly linked to the shorter daylight hours of winter.

Sudden cardiac death and nonfatal heart attacks occur most frequently between 7:00 and 11:00 a.m.

Strokes occur more frequently between 6:00 a.m. and noon.

Asthma sufferers experience their worst symptoms in the early morning hours.

The growth of breast cancer cells may be inhibited by melatonin. (When a 1995 study showed that Finnish flight attendants had an increased risk of breast cancer, the principal investigator hypothesized that frequently crossing time zones was part of the problem, since jet lag interferes with the normal production of melatonin. Although his theory has not yet been proven, other studies have shown that melatonin inhibits the growth of breast cancer cells.)

Circadian rhythms have been substantiated in the symptoms of rheumatoid arthritis (least pain and stiffness around 5 p.m.) and allergic rhinitis (peak of worst symptoms between 5:00 and 7:00 a.m.).

WORKOUT ANYTIME on WYFF Greenville

WORKOUT ANYTIME on WYFF Greenville

Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
View the segments here and here. 

My trip to Dhaka, Bangladesh

It was quite an intense process to pin down the existing system. It existed in bits and pieces in various places of the organization managed by different people in the structure. It was quite unique to find an organization with a finance management system spanning from resource mobilization (Income generation, contracting and applying for donor funding) to implementing through 3rd parties (implementation through contractors as well as other civil society organizations) but not to have it documented any ware. It was a tough job to get agreement on the current practices as well, as each individual seems to have tweaked it to suite his/her requirement. Finally we documented the entire system as the minimum agreed common current practices.

This is typical of an organization which has grown organically and reached a point that does not allow it to grow any further without structure and form in its organization structure and systems. As a result of this the assignment has ballooned into a much bigger assignment as the organization needs basic guidance regarding system development and management. I was also able to analyze the system and suggest some key improvements (fundamental stuff really) to instill the use and management of the system. The client has now requested that I support them in the preparation for implementation which needs a lot of pre planning and documentation in the form of developing policies, manuals, forms, job descriptions, task calculation etc. It also means that we have to design the administrative and functional structure so that the organization can manage a decentralized finance function spanning the entire spectrum of financial management.

I left Dhaka on Friday and headed back to Colombo. The flight from Dhaka to Bangkok on TG was fine and operated on time. I had a 5 hour stay in Bangkok before I took the flight to Colombo. I must say that I don’t find the new airport at Bangkok as passenger friendly as the earlier one. The new one however is big and posh but it has lost some of its coziness in my opinion. As usual the Colombo flight was delayed for over a half an hour and once in Colombo had to endure the long queues at the emigration counter.

I am back in Colombo and back at work to finish another assignment (OCA) I took concurrently and had a junior consultant do some parts of it. I have to send its draft report by the end of business 6th April. My next assignment is going to be in the Philippines and looking forward to it as it will be my first assignment in the Philippines.

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME VP of Development Randy Trotter was recently featured in the Albuquerque Business First. The article begins with information about WORKOUT ANYTIME and why Albuquerque is ripe for the concept to enter the market and grow. Randy is quoted about the franchise opportunity and they provide information about financing needed to open a location. The article goes on to touch on the real estate footprint. The article is ended by providing Randy’s cell phone number for anyone interested in a franchise.
You can view the full article here.
 

10 Reasons to Write with Technology

I’m super excited about the two books that I’m studying this summer as part of my summer series.

Today, I’m diving into the first one entitled When Writing with Technology Matters by Carol Bedard and Charles Fuhrken. 
Rather than giving you a laundry list of all of the ways that you could integrate technology into writing, this book goes in-depth into two specific projects. The first project uses reading and writing to launch moviemaking, and the second project is authoring a visual nonfiction essay. As someone who routinely integrates technology in the classroom, I like this book because it examines lots of angles of these types of projects in great detail. But this book is also good for beginners for that same reason. Rather than offering an overwhelming number of ideas, it breaks down projects into manageable and authentic steps. 
I’ll be examining each of those projects in future posts, but today I want to talk about the first chapter – 10 Reasons Why Writing with Technology Matters.

The opening chapter is filled with research about how technology integration contributes to student learning. They break it down into a list of the following 10 items:

Something that I would add to this list that captures many of the items is the notion of “authenticity.” When you engage students in project-based learning such as making a movie or designing a visual essay, students feel like they have a real purpose. Their work will be viewed by others, and this really motivates students to push a little bit harder. Giving students the freedom, space, and resources to work on something meaningful is a powerful recipe for empowering learners.

I also want to comment on teacher-disposition. A lot of people who visit my classroom think that I have all the answers for technology integration, but let me tell you a secret — I don’t. Almost every day, a student or teacher will ask me a question about how to do something, and I won’t immediately know the answer.

And that’s okay.

Because one of the most important things I can model for my students is the act of troubleshooting and problem solving. If I can’t figure out how to do something, I’ll hop on the internet and poke around until I can find the answer. I think a lot of teachers avoid technology because they’re not confident in their ability to work with it, but you can find a whole lot of information just-in-time as you need it online. Don’t let a lack of confidence divert you from trying some of these projects.

Next week, we’ll dive into Part 1: Reading and Writing to Launch Moviemaking. If you haven’t already picked up a copy of this book, I’d highly recommend it. And it’s not too late to join in the book study! In fact, you’re only 14 pages behind! 🙂

If you are reading this book, I’d love to know what you think. Leave me a note in the comment section!

Happy reading (and writing)!

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

Interested in opening your own WORKOUT ANYTIME?

Think big. Keep it simple. Do it with integrity.”

Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

“People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

Site Selection and Lease Negotiation

– We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
– Site selection/lease negotiation service offered at no-cost to franchise owner
– In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
– WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

Find out more here. 

Quick Tip: Team Fortress 2 – What To Do With Those Naughty and Nice Winter Crates (Winter 2013)

By now, most of you have seen these Random Drops, Crates that are either “Nice” or “Naughty” – but, “How do you open them..”, you may have asked? Well, this post is just a quick note to answer this question I have already started seeing on game forums and Question/Answer websites. Answer: You Can’t Open Them (Yet)…

Soon hopefully, keys should be available for purchase at the Mann Company Store (Steam/Valve/TF2), most likely for $2.49 USD, if keys and dropped crates combinations of the past are anything to go by [I assume they are dropping them now, to allow people to collect some before the keys go on sale – to sell more keys]. So, if you get these [I have already started getting them when playing, hence the screencaps], just wait a little bit longer, until the keys themselves go on sale. Then, if you want to open them, just purchase keys and unlock them! Soon™… (Remember, you will need one key for each crate)

See You In The Games!

My trip to Wadduwa

I just returned home after a 3 day South Asian Regional Workshop on Resource Mobilization. It was a good workshop as it took RM strategies to the next level and looked at operationalizing them. As Strategic Planning / Organization Development consultants we often highlight the strategy for resource mobilization; be it venture capital, angel fund or gearing in the private sector to institutional fund raising and linking with CSR in the development sector.

What was most interesting was the cases we went through, and going through a logical process which led to ones resource mobilization strategy. The workshop was facilitated by a retired general from the Indian army and he was a good facilitator who kept the attention of a group of 50 people for 3 days. It is important that we as consultants keep up with new trends as well as take time out to reflect on our ability to continually add value to our clients by increasing our body of knowledge.

We also learned of new ideas and trends in the field of resource mobilization and were very useful given the current global economic situation. Looking forward to taking the learning’s to my clients in the near future.

I also got a very small project in the financial services industry while I was at the workshop. It is from an old client who has the habit of not giving me too much lead time for projects: there goes my week end. So I am going straight to facilitating a strategy workshop in the financial industry over the weekend.

Happy New Year from The Game Tips And More Blog! [NewYears’ Greetings 2017]

“Happy New Year 2017 Greetings”
by The Game Tips And More Blog
(Just Cause 3 capture, Highest Settings and FXAA, with Text and Effects added)

I personally wish you all much better things in 2017!

[To help celebrate the end of a crazy 2016 (for almost everybody, it seems) and the beginning of a hopefully-better 2017, this was simply a fireworks celebration captured in Just Cause 3 (Highest Settings, FXAA). I then added a ‘crowd’ overlay that had a bit of ‘glitter’ effects in it (used with License from CyberLink’s PowerDirector 12) and put some Just Cause 3 – styled text  on top of it all (using a free font called “Dirty Old Town” which looked somewhat like the JC3 font and another one whose name escapes me at the moment). Lastly, I put a “Text FX” Overlay effect to show the year, an effect that was also in PowerDirector 12. As always, it was seemingly simple to think of, but took longer than expected to complete the composition (almost a day late for NewYear’s, heh). 
HAPPY NEW YEAR ! ]

Game Material by Avalanche Game Studios (avalanchestudios.com) and Square Enix (square-enix.com)
Captured and Edited by Troy from The Game Tips And More Blog

It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

https://www.humblebundle.com/software/vegas-pro-creative-freedom




For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

  • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

  • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


[Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

Good Luck with it – and Have Fun!
[Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

Addendum:

During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

PIONEER STUDIOS OFFICE MICROSOFT BY SKB ARCHITECTS

The New Pioneer Studios Office which was designed by SkB Architects starting from the idea that need a space to socialize at night as well as it functioned during the day.

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Mt Trip to Manila, Philippines cont……..

I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

Trip to Hyderabad cont…….

Wow what an assignment! I must say that I have experienced similar assignments in the past in other sectors. However for this sector (development sector) it was a first. As a consultant you have to be on guard all the time when doing an Organization Capacity Assessment (Very similar to a “Due Diligence” in the private sector); if the client wants to mislead you, it can be done quite easily. In my case I was confronted with just that.

Things that should look out for are:

  1. Uniformity in questioners
  2. Having sets of files pre prepared for you (always ask for random files)
  3. When interviewing staff they have uniform answers or say very similar things (always ask to speak to random sample of staff and triangulate your findings; include speaking to other stakeholders as they will be a be useful source of information)
  4. Taking a long time to locate files and other documents when you request for them
  5. Key staff suddenly taking ill and not being available for interviews
  6. Acting “stupid” or not seem to understand what you are requesting for or saying

These things must be handled very diplomatically otherwise you will not be able to complete the assignment. Do not have a “knee jerk” reaction, observe very well and collect enough specific examples so that you have a basis for doubting what is presented to you. At the same time you must see if this deception is systematic or simply put up for this occasion.

If it is systemic you now have a real problem; you will not be able to decipher what is “genuine” and what is “false.” My recommendation is at this point you should seek clarifications from the person who hired you as well as speaking to the decision makers of your client. A temporary halt to the assessment will be in order to do this discretely. Suggest you take prudent steps based on your clients feedback.

However if you feel it is a put up for this particular assessment then your task is easier and it should be handled with the management of the organization that you are assessing. (Don’t forget you still need to advice your client regarding this unexpected turn of events) As this would be difficult situation for some consultants to handle; I suggest a cautious but a very direct approach. This will reduce the space for excuses by the staff. Since it will come as a surprise to them the staff of the organization you are assessing will also not be able to gang up on you to defend themselves. Make sure that you do not engage in a long dragged out discussion, be short and to the point. If handled properly it should bring about normalcy to the process.

If however you do not feel comfortable to take a direct approach you must then document both versions of the process i.e.

  1. The results that are shown by the staff of the organization
  2. Your observations and reservation of those results

This however will not be very useful in the end; as it will not provide the right results to take decisions the assessment was supposed to deliver in the first place. In some rare cases you may need to repeat the assessment to get the right results.

In my case it was the latter and I did confront the staff and the management regarding it. There was an attempt to defend the position but it was not successful; things returned to an acceptable level of normalcy and I was able to complete the assignment.

Food Repair Guide: Baking Part 2

Swiss roll

If you are making a Swiss roll, then line the tin with greaseproof paper, but do ensure that you grease the paper well before pouring in the mixture. Try also to ensure that the oven shelf is level or all the mixture will run to one side. If it does, all is not lost, although it will be rather difficult to roll. When you turn the Swiss roll out, do so onto a tea cloth or piece of greaseproof paper that has been coated well with icing sugar. If not well sugared, the Swiss roll will stick to the cloth or paper and you will have a terrible time rolling it. If you have not greased the paper properly, you will also have a terrible time peeling it off, but patience will usually win the day. Do not worry if the roll is not entirely perfect. As long as you can keep about one third of it intact, that will do for theoutside and no one will see the inside. Dredge it thoroughly with sugar or icing sugar. Or, if it has really fallen apart, pre-slice it before serving so that no one can see.

Failed sponge cake

If, despite your best endeavours, your sponge cake, be it light or rich, is dry, crumbly, flat, lumpy or generally unappealing, do not throw it out. If you are desperate for a complete cake or dessert, cut the sponge into very thin layers, sprinkle each with a little liqueur if for a dessert, and layer very generously with filling so that the cake gets smothered. Then top or ice equally generously and no one will ever know. If you do not need the cake too urgently, keep it to make trifles, tipsy cakes or anything that needs a sponge base. Buried deep enough and soaked comprehensively enough, even the most revolting cake will become quite palatable. Alternatively, crumble it and use it as a topping. When toasted, the crumbs can be used as decoration for almost anything in need of disguise.

Diet Start

This does not apply only to plain sponges. Orange or lemon sponges would be a delicious base for any cream dessert, chocolate, coffee or even gingerbread can be used as a base for ‘a trifle with a difference’. Indeed, coffee and chocolate cake could be sliced into fingers, thoroughly dried out in the oven and sandwiched together with some butter icing as biscuits. Any of the above could be used as the base for a baked pudding, but remember that the cake will be sweeter than bread or rice so reduce the amount of sugar.

Failed fruit cakes

Failed fruit cakes are just as adaptable.

Rich fruit cakes often get old and dry out. Do not abandon them to the birds. Cut deep slits in the top of the cake and feed with a mixture of brandy and sherry, or, if you do not want to be too alcoholic, a fruit wine or good fruit cordial. The amount you give the cake will depend on how dry it is, but you can always cut it in half and test the middle.

The same principle can be applied to lighter fruit cakes although one needs to be more temperate. A large quantity of fruit will soak up the liquid and make the whole mixture moist but sponge will merely become soggy, so the greater the proportion of sponge to fruit the less liquid it should be given. It is usually better to ice the cake after it has been — to conceal the tell tale signs.

If a rich fruit cake really is dry beyond redemption, break it up in a bowl, add some suet and a goodly measure of liquor, leave it to soak for 24 hours, then squash it well into a bowl and steam it as a Christmas pudding. It will be a little crumbly and somewhat lighter than the standard, but many people prefer it that way!

Icings

The disaster-prone cook should steer clear of all but glace, butter and royalicing — fondants and their kind are for those with time and expertise to spare.

Glace icing

Glace icing is quick and simple but messy. It is not easy to get the proportion of icing sugar to liquid right to achieve `spreadability’ without `runability’.

Always put whatever you are going to ice on a rack so that the extra can run off without getting stuck in a thick frill round the bottom of the cake. Arm yourself with a pot of boiling water and several metal spatulas or flat knives to smooth out the lumps. Inevitably, the wretched stuff will never quite cover the top of the cake in the first run, and when you add the next bit, the first will have dried and the whole thing will go lumpy. Only practice is going to perfect your technique, but smoothing with a spatula dipped in boiling water does help.

Always be ready to decorate or disguise the top with something other than icing — even if only gold and silver balls. Grated chocolate is a good alternative.

Marbling

Marbling the top, if it is reasonable, will distract the eye from any minor blemishes and is easy and impressive in itself. Run a little melted chocolate, or different coloured icing, in parallel lines across the top of the cake. Then, before it is dried, take a knife point and pull it across the cake top in straight lines at right angles to the first lines, thus pulling the lines into a feathered shape. Try it a couple of times on greaseproof paper before you launch into the cake.

If all fails and you make a complete mess of the icing, wait till it is dry, then scrape the whole lot off and start again.

Butter icing

Butter icing is the world’s easiest, but it is very rich. Many people prefer to use shortening as the fat base, which keeps it much lighter. The only hazard with butter icing is to get enough flavour into it. Like brandy butter (which is, of course, only a butter icing) nothing is nastier than a butter icing that tastes like sweetened butter. Therefore, taste after you have followed the recipe. If you have used a particularly strongly flavoured butter, you will need more chocolate, lemon or whatever you are using. Never try to spread it straight out of the fridge.

Royal icing

Royal icing is also simple, using egg white rather than water or syrup to moisten the icing sugar. Add a little lemon juice to counteract the sweetness and do not forget a drop or two of glycerine to prevent it hardening totally. If you do have a cake with unglycerined icing, you would be better advised to saw your way through it with a bread knife rather than to try and cut it, when it will shatter and ricochet all over the drawing room and Great Aunt Ethel. Royal icing can always be broken off and replaced with a new batch. Use a small amount of icing to experiment with the colour.

reACT Trainer Total Body Circuit Workout

One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

Horizontal Press (chest press of some type)

Horizontal Pull (Row of some type)

Overhead Press

Vertical Pull – (some type of vertical pulling movement)

Here is a sample reACT Trainer Total Body Circuit:

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME was recently featured in an article in the Idaho Business Review titled, “New 24-hour Gym Chain to Expand into Idaho”. The article begins with details about the brand’s plans for expansion into the northwest, including Idaho. The article then provides background on how Rick Hascall (WORKOUT ANYTIME Pacific Northwest Area Developer) and Chris Gately (WORKOUT ANYTIME North Florida Area Developer) met while overseas. Rick and Chris talk about the plan to open a club by the end of the year and then use that as a showcase for other franchise prospects. The article closes with more details about the brand, information on the investment, and how WORKOUT ANYTIME is able to grow in large cities.
You can also view the full article here.

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

Good ideas that we can see these concrete houses the Netherlands have been totally inspired and inspiring call to us to try. Most of the ideas that we can see the space was not available outside of this house. concrete material, which come from the use of brick and stone was looking for a huge ornate and extraordinary. We can try to come to our ideas to make this house looking for a pleasant as well as ourselves and our families.

The concept of an interior provides ample room to combine the ideas. Integration space that stands between the living room, dining room and kitchen area is desirable for those who like social live and love to watch their children. These applications are rustic room in search of other great ideas that make us who see this house completely. The decorations of great gold bathroom also feel comfortable. Honestly, the more attractive space in this house was the place of these decorations ideas outdoor dining. Designed by Arjen Reas

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

Kneeling High to Low Chop – The Best Core Exercise You are Not Doing!

Core stability is a big buzzword in fitness, and for very good reason.     The ability to keep the core stable is essential for proper movement and prevention of injury.      Stability has three aspects related to the planes of movement:
Sagittal Plane Stability– is the ability to prevent flexion and extension of the core from the low back to the top of the head.
Front Plane Stability– is the ability to prevent lateral flexion of the core from the top of the head to the low back.
Transverse Plan Stability – is the ability to prevent rotation of the core from the top of the head to the low back
Stability is about preventing movement – not creating movement!   All muscles can act as stabilizers, movers, or absorbers, but the muscles of the core spend a lot of time preventing movement in many activities from running to walking to jumping.    This is why exercises like the plank are considered functional because the plank is about using core muscles to prevent movement of the core as opposed to exercises like a crunch which is about creating movement.
To have a strong and stable core it is important to perform stability exercises in all three planes of movement.     The plank and side plank do a great job of challenging muscles to prevent movement in the sagittal and front planes, but that leaves the Transverse Plane.    This is significant because the vast majority of injuries occur in the Transverse Plane with Frontal Plane injuries close behind.
It is also important to note that rotational movement (movement in the transverse plane) is fundamental to human movement in general and the generation of explosive force in many activities from Golf to Tennis to Boxing.
One of the best ways to develop rotational stability in the Transverse Plane is doing high to low anti-rotation chops in a half kneeling position using either resistance bands or cable resistance with a rope handle or pole attached.
Execution

The anchor point of the resistance band/location of the cable handle should be position up high.     Your body should be facing perpendicular to a line from the handle/anchor point straight down and across your body.     You should be in a half kneeling posture down on one knee (the leg closest to the cable/band should flexed with foot flat on the floor and hip and knee bent at 90 degrees.   
The other knee should be down on the floor (use a cushion or mat!) with shin and top of foot along the ground directly behind the knee.   It is important that the knee is directly under the hip.  It is also important that the spine be held straight with a straight line from top of head through the spine and hip to the knee on the ground.    Extend the spine fully and keep your spine fully elongated throughout the exercise.
Reach across the body and place both hands on the resistance band/rope spread apart with hands shoulder width apart.gripping the band/rope.
Keeping the shoulders and hips facing forward the entire time pull the rope/band directly down and across the body and pause in the bottom position making sure there is no movement to in the shoulders or hips while maintaining a fully lengthened spine.   Then slowly return to the starting position.    Form is VERY important in this exercise.
Here are two great instructional videos:
http://www.stack.com/video/3730538400001/elite-performance-with-mike-boyle-increase-core-strength-with-anti-rotation-exercises

http://www.muscleandfitness.com/workouts/abs-and-core-exercises/videos/half-kneeling-stability-chop

INTERIOR DESIGN IN BANKE HOTEL

BANKE HOTEL

BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

BANKE HOTEL DESIGNBANKE HOTEL DESIGN

The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

How to Overcome a Negative Habit



Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
Three Parts of a Habit
The Cue: a situational trigger that is based on a reward you are seeking.
The Routine:  a physical or emotional action you take to obtain the reward.
The Reward:  the satisfaction you get by following the habit.

The Steps to Changing a Habit
Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
Understand Cravings and Rewards

The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
Determine the Specific Cue for the Habit

This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
Where are you when the urge for a reward hits you?
What time is it?
What is your emotional state?
Who else is present?
What did you do right before you had the urge?
Have a Plan!
Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

Number Talks Book Study – Chapter 2

The farther I get into the book Number Talks, the more excited I am about implementing them next year. This is such a great resource, and I’m only on Chapter 2!

I’m linking up with Misty at Think, Wonder, & Teach for her fabulous book study. If you haven’t checked it out yet, be sure to visit her because she’s already offering some great resources to support the book (whereas mine are still works in progress!).

This chapter walks through some of the nuts and bolts of setting up number talks, and it describes how to manage some of the procedures and expectations. One of the sections that really resonated with me in this chapter was about building accountability with the students. So often, there are a few students who are eager to share their mathematical thinking, and there are many others who are willing to sit back and let those students shine. I don’t like pulling sticks with students’ names for something like this, but I also don’t want students to feel like they don’t need to participate. This book offered some great strategies for dealing with that:

1. Once all of the strategies have been shared, number them and have students show with fingers which one they found to be the most efficient strategy. This will get them thinking about the math involved.

2. Keep records of the problems posed and strategies used, and label them with the students’ names. I plan to use my iPad to track this. I’ve talked before about setting up student data notebooks on Evernote, and I think that would be the perfect platform to track student participation. I can photograph students’ work and add anecdotal records about what I observe. It would also be easy to share with parents at parent-teacher conferences.

3. Hold small group number talks throughout the week. As I prepare to transition into more of a math workshop/guided math approach, this seems like a very viable option.

4. Create and post anchor charts of the different strategies that students are using. The book names a variety of strategies, or you could develop names with your students. Having the charts available to reference could scaffold the less confident students.

5. Use exit cards. The authors recommend giving each student a notecard. On one side, students should record their solution, and on the other side, they should record a strategy that another student shared that they liked.

6. Give a weekly computation assessment of 5-10 problems. The selected problems should reinforce the concepts and strategies introduced throughout the week. I can also imagine using an app like Show Me or Explain Everything to assess. These are whiteboard apps that allow students to record audio on top of their drawing. Students could record their solutions and narrate them as if they’re presenting them to the class. This would be another important artifact that could be saved in the student’s Evernote portfolio to share with parents or an RTI committee. If it’s only one problem, most students would be able to complete the task on the app in 5-10 minutes as the video they’d be creating should be less than a minute long.

I think these accountability measures could be effective in getting students to participate more. Of course, the classroom environment will matter, too, and I look forward to setting those factors in place for my Number Talks this fall.

In other news, I’m excited to share that I’ll be participating in Sabra’s book study of Word Nerds at Teaching with a Touch of Twang. Word Nerds explores strategies for teaching vocabulary to students, and it’s another fantastic resource. It’s published by Stenhouse, and you can preview the entire book online or you can purchase the book in Paperbook or Kindle edition.

The book study starts on Thursday and runs throughout the summer. You can see the full schedule by clicking on the image above. I’ll be hosting Chapter 7, and I can’t wait!

Also, have you joined in the Teacher Toolbox Trio Linky Celebration yet?

You still have time to link up and be eligible to win a $25 Teachers Pay Teachers gift certificate! The linky celebration will close on Friday night, so be sure to join the fun. My wish list has definitely grown as I’ve seen all of the fabulous resources other teachers are sharing and recommending.

Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

The “Fatal Graphics Error” message, when starting MTW2

I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
Click image to see Full Size

After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
Hopefully that works for you all, as it did for me.

See You In The Games!

My recommendation: The 3-step dietary programme Do what I did, look the results

The dietary plans that follow offer simple, nutritious and delicious recipes on a staged regime that should take you from overweight to optimum weight and enhanced well-being.

The reason many people depend on junk and convenience foods is because they lead such busy lives. Most of the recipes in these plans are quick to prepare, and should be within the capabilities of even the most reluctant cook. There are exceptions: preparing the Chicken Soup will take a couple of hours, but it makes a lot and you can freeze separate portions, ensuring that you can have a nutritious low-carb meal even when the clock is ticking away.

So blitz your cupboards and discard any foodstuffs that don’t fit the bill. The journey to a healthy, lean body begins here.

The Plans

The 3-step programme includes 3 eating plans. The Fast-Track Plan will help you lose weight quickly and give you that all-important boost on a 50 per cent protein/20 per cent carbohydrate/30 per cent fat regime that will initiate benign dietary ketosis. It should last for 7-21 days, after which you are ready to move on to the next stage. Your weight loss should be around 2-5.5kg (4-121b) if you are a woman and 4-7.25kg (8-161b) if you are a man, depending on how long you remain on this plan.

Diet Start

During the Keep on Tracking Plan you increase your levels of low-tomedium GI carbohydrates and move into a 35 per cent protein/35 per cent carbohydrate/30 per cent fat regime. You still monitor ketosis and watch how introducing higher levels of carbohydrates affects your weight loss, which should now even out to 0.25-1 kg (1/2-21b) per week.

The No Backtracking Plan is your eating regime for life. You can gradually introduce fruit and vegetables, grains and pulses from the higher GI ranges, in moderation. It is important to keep an eye on how your body reacts to these and to establish your perfect weight-management level.

If you are a vegetarian, there is plenty of advice on how to adapt the plans and recipes to suit your dietary requirements. Granted, your choice isn’t as varied as that of a non-vegetarian, but don’t use this as an excuse not to give it a go. If you follow the basic guidelines and make simple changes to the recipes where necessary, you should lose weight and eradicate insulin resistance successfully.

FOOD TO THROW OUT

  • White flour and sugar
  • Honey
  • Biscuits
  • Crisps
  • Sweets
  • Sugary drinks
  • White rice, bread, pasta
  • Processed foods high in carbohydrates
  • Ready-made sauces
  • Gravy mixes

Customize the plans to suit your lifestyle and dietary preferences

The suggested menu plans are not set in stone – they are templates to encourage you to eat the right sort and amount of food.

If you wish to change a recipe – because you don’t like lamb and would rather have chicken, say – it really doesn’t matter. Just try to use foods of a similar dietary value. When swapping vegetables and fruit, go for ones in the same GI category; try to exchange meat for meat, or fish for fish, in the same amounts. If you change a recipe from meat to fish, you may need to use slightly more fish to give you the same level of protein. For example, 125g (4oz) of poultry or lean meat should be replaced with 175g (6oz) of fish.

Simplify the recipes

If you are short of time, or like your food a bit plainer, simplify the recipe. If you don’t fancy Baked Tuna with Tomato and Herbs, adapt the ingredients, ensuring that you still have sufficient protein, carbohydrates and healthy fats – have a tuna salad with tomatoes and dark green leaves.

On a budget

If money is short and you find some of the suggested ingredients a little expensive, use some budgetary ingenuity to bring down the cost. Fresh salmon can be replaced with coley or whiting, or even tinned salmon.

Use the suggested meals as inspiration. In order to manage your weight in the future, you will have to experiment and be prepared to adapt.

EUROPEAN STYLED DESIGN IDEAS BATHROOM

EUROPEAN STYLED DESIGN IDEAS BATHROOM

If you are looking for the best images of the sample of European-style bathroom designs, and applications of a modern sauna and gym. Here are sample images of European inspired bathroom design ideas for the home. European influence in a bathroom attached to the right furniture, cabinets bath faucets, vanities, and tile e. As well as their luxurious and spacious sauna Finish Head (European company based in Germany) in a corner, the rest of the spacious bathroom, as the essay should be dedicated to wellness and keep beautiful. Room with a bright red Finnish sauna focuses on physical fitness, also welcomed the formation of large area white cushions and fitness equipment attached to the wall. It makes sense that this is quite large, walk-in glass shower. If you have more time, is set beside a white bath has a sauna, in front of two large floor to ceiling windows.

The second room is here in a Finnish sauna takes gentler approach – offering a job to escape from their mental well-being of the outside world. solarium luxury, you can pull out in front of a soothing fire. Wide bubble bath, shower and steam bath in a wooden soaking dip to give you a variety of bathing options. You can easily live in the house of a modern European hits with a private bathroom attached.

EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM

And More: In One Sentence™ – “The RX 470 or The RX 480”? [A Very Short Comparison with Sources, Currently Text-Only]

As done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry’…
For this post, I answer the quite-specific Hardware Upgrading question [mainly as it was one that I was asking myself, so I thought I would share my recent findings with others], ‘should you get the AMD Radeon RX 470 GPU or the RX 480’..?

The Short Version

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The Long Version

Again, as done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry'[just like how I spent tons of time on the very creative and original titling of these types of posts..].

Where was I? Oh yes, here then is my summation for a Hardware Purchase Suggestion, a very specific answer for a very specific question in Hardware Upgrading [arrived at after many hours of reading, researching, watching benchmarking videos, all while getting distracted by games, health issues and non-computery-or-techie events in life… but you can skip all of that Life Drama of your own and skip all of the time Researching on your own and just ‘get to the jist’ right here], in one sentence – the answer to the question:

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The answer above is based on an average viewpoint of all reviews read and videos watched. Of course, there is always fluctuation in the average amount (sometimes the fps was exactly the same, sometimes it was a quick change in difference [eg. in a video benchmark] by 20fps or slightly more for a short period of time). Also, for some people, money isn’t the issue and they want the higher-shelf RX 480 for the capability it offers. No problem, I’m just presenting what I have seen so far, between the 470 and the 480. If you can “easily” afford the faster product, go for that – but for those who are in the situation where $20 or $40 is a “big step” in price at the moment for them, but they really want to upgrade their aging hardware “now” at the same time – then this summation is for them.

As I always say, if you are looking to upgrade any hardware in your system – and if you have the time to do it:

Do your own research, read lots of reviews, check out prices in multiple places/sites/stores and find out which is the best path for you, at that point in time. No matter what the part is, spend as much as you “comfortably” can (to make it more ‘future proof’). What is the most important/best advice I can give, from 20+ years of technical expertise and real-world experience in the field presented without making a new paragraph so it would be easier to read..? It is this: No matter what computer part you are purchasing, if you are not in a place where “money isn’t an issue”, then watch for “The Jump” in price – that leap or huge gap in prices – and purchase a part that is just in front of that gap (before the large price increase); that is the “Price Sweet Spot”, where you are getting ‘the most bang for your buck’ and other cliche phrases. Most of all though – have fun learning and doing it all!

This Message Brought To You By Troy from The Game Tips And More Blog And Free Websites And Other Things That Made It All Happen

List of Some Sources Researched (not including video benchmark sources):

http://www.techspot.com/review/1220-amd-radeon-rx-470/page2.html
http://www.gamersnexus.net/hwreviews/2544-sapphire-rx-470-platinum-review-benchmark-vs-480-gtx-1060/page-4
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/73155-amd-radeon-rx-470-4gb-review-4.html
http://www.pcworld.com/article/3104044/components-graphics/amd-radeon-rx-470-review-a-great-graphics-card-with-a-terrible-price.html?page=3
http://wccftech.com/amd-radeon-rx-480-rx-470-3dmark-performance/
https://www.techpowerup.com/reviews/ASUS/RX_470_STRIX_OC/10.html
http://www.tomshardware.com/reviews/amd-radeon-rx-470,4703-4.html

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR TEENS

SMALL ROOM DESIGN FOR TEENS

There were many children inside, but somehow neglected to share ideas on the bed and adolescents. We will try to catch it from that position, where we’ll show you 10 ways to decorate the room of a teenager. Of course, these designs are aimed at age group 9-14 years and do not include all decorations eccentric but warm and relaxing colors. There are plenty of shelves for CDs, books and magazines, then we are also dealing with students of consciousness. I especially like the pictures on the wall of cartoons in black and white as they seem to bring personality into the room.

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

1948 Packard woody station wagon and matching teardrop trailer

https://silodrome.com/packard-eight-station-sedan-teardrop-camper/

fantastic paintjob on this speedboat

http://darkdraggon.tumblr.com/page/3

5 Tips to Make Your Paperless Classroom Work

I’m now more than 3/4 of the way through my year of 1:1 iPad work with fourth graders, and while I hoped to have a paperless classroom, the reality has been a bit different. We’re definitely using less paper than we would without iPads, but I can’t pretend that we’re paper-free. As I reflect on this school year, here are five things I would do differently next year to make the paperless transition go even better.

1. Begin the year with a typing boot camp.
The biggest obstacle to the paperless classroom at the beginning of fourth grade is simply that the kids (for the most part) don’t know how to type. Tasks that should have been quick ended up taking 3-4 times the length that I’d anticipated just because the kids were hunting for keys on the keyboard. I think if I’d spent the first term of the year working on typing skills, it would have made a big difference. And on a related note, I’d encourage students to get bluetooth keyboards to use with their iPads (assuming the school won’t invest in those, too).

2. Transition gradually.
When my students start fourth grade, they come from a school that does not have 1:1 iPads. As a result, the technology integration is a big adjustment–for both students and parents. Going fully paperless can be a huge culture shock for the students, and the transition can produce some anxiety. Even with tech-savvy students, there can be a huge learning curve with different apps, and it can quickly get frustrating for some kids–especially the ones who were very comfortable with school as they previously knew it. Start small with a few key apps (e.g., Edmodo, Evernote) and build from there.

3. Try to give options.
Some students are far more comfortable with the iPads than others, and sometimes their lack of comfort can impact their work. With writing, for example, I’ve learned to give students the option of drafting on paper, even though there are lots of mind-mapping and word processing apps they could use for drafting. Usually once they have that first draft on paper, they’re more comfortable typing it in to make revisions and edits. For some of my students, that flexibility makes a huge difference in the amount of writing they can endure. For other students, the iPads boost productivity. Either way, we know that choice is important to students, and this is another important way to differentiate in a 1:1 classroom.

4. Don’t force it.
There are still some contexts where it makes more sense to use paper. Math tests are one example for me. I don’t tend to give students multiple choice tests in math, and I want them to have plenty of space to show their work. Yes, they could do the work on GoodReader with a stylus and turn it in on Edmodo, but that’s not necessarily more efficient for me to grade–especially on a multipage test. Similarly, we’re still using paper and a notebook for our word study work. We use differentiated spelling lists with Words Their Way, and I want students to go through the practice of sorting and recording their words each week. Paper makes sense for that.

5. Stay flexible, and have a backup plan.
At the beginning of the year, we were using our iPads for almost everything (we still are). But then I got sick, and I had to write sub plans. I never know who I’m going to have as a sub, but there are two things that are certain: 1) the sub will never be as comfortable managing a class full of iPads as I am, and 2) students will be more apt to misbehave when they have a sub. As a result, I don’t usually include the iPads in my sub plans unless I know that there will be someone there to enforce my expectations (e.g., someone I co-teach with or my student teacher). If students expect to use the iPads for everything, it can really throw a wrench into the system to take those away, even for a day. Therefore, it’s important to be flexible with using them throughout the year so that students aren’t dependent on them. Sure, they might have a preference, but they need to be able to function without them. That’s also true for times when the power goes out, the internet goes down, or a software glitch makes the iPad temporarily unavailable.

Any tips to add? I’d love to hear your thoughts in the comments section.

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

Cellulite Breakdown and Essential Detoxification part 2

Beware the Heavy Metals

Whether or not you go for music of the same name, heavy metals in your body are something you want to get rid of. These elements, the concentration of which has increased dramatically in our air, foods and water since the Industrial Revolution, can seriously interfere with your body’s metabolic functioning and thus challenge its wellbeing. Mercury tends to suppress the levels of white blood cells involved in the immune response. Cadmium displaces the essential element zinc needed for a great many of your body’s enzyme systems and renders them inefficient and even inactive (including those that build new collagen and elastin for skin and connective tissues). In the West we now have a concentration of lead in our bodies some 500 to 1,000 times that of our pre-technological ancestors. High levels of this heavy metal age us prematurely, interfere with our mental processes, suppress immunity and contribute to depression. Aluminium, another heavy metal, detrimentally affects the central nervous system. It has recently been associated with the development of pre-senile dementia or Alzheimer’s disease.

Diet Start

The presence of all of these elements in excessive quantities (and their concentrations in the human body appear to be increasing with each passing decade) generally interferes with the metabolic processes on which good body ecology and therefore the absence of cellulite depends. It is important to do everything you can to eliminate them from your body. (The alginates, forms of fibre found in seaweeds, also chelate heavy metals and adding sea plants to your diet on an ongoing basis is a good idea, after your applefast is finished.) You also need to be aware of ways you can protect yourself from allowing heavy metals to build up in the first place. Here are a few suggestions:

  • Steer clear of tobacco smoke and exhaust fumes
  • Don’t buy fruit or vegetables from shops in the street where they have been exposed to leaded exhaust fumes
  • Don’t cook in aluminium pans
  • Eat plenty of fibre and nutrient-rich vegetables and fruits.

More Than An Apple A Day

Now let’s get down to the programme. An applefast can be done by any healthy person provided of course your doctor agrees. It was taught to me twenty years ago by Dr Gordon Latto, a British medical doctor who uses nothing but food and breathing and a few herbs to heal even the most complex and chronic conditions. He is almost 80 and one of the most remarkably healthy and vital men I have ever met. The applefast lasts for two or three days (never more, except under doctor’s supervision). You eat only raw apples — as many varieties as you want — for breakfast, lunch and dinner as well as in between. Eat all you want, but chew well and always crunch up the seeds too. They contain valuable nutrients that help the process.

During the applefast you need to give up all tea and coffee although you may have as much mineral water or herb tea made with mineral water as you please, sweetened with a little honey if you prefer. The best herb tea of all for The Breakdown is solidago or golden rod which you can get from a good herbalist. Like nettle, it has natural diuretic properties to help shift some of the stored water in your tissues but, unlike nettle, it actually tastes pleasant.

Don’t be surprised if you suffer the odd headache during this dynamic two or three days clear out. (Especially if you have been a dyed-in-the-wool coffee or tea drinker.) This is a sign that the whole process is happening rapidly. If you do, then take a 20-minute epsom salts bath and lie down in a darkened room to rest for 15 minutes afterwards. (More about this in a moment.)

External work on your body is important too to trigger the detoxification process. Start now to incorporate skin brushing into your daily routine. After the applefast is over continue doing it but begin to use other techniques as well to enhance lymphatic drainage, to help break up hardened connective tissue, and to keep the detoxification process going while you are rebuilding new, strong connective tissue and ground substance.

And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
(Click to see Full Size)

Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

[Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

Georgia Bloggers Meet-up

I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

Jayne, Kelly, Angie, Stacy, Tara, Valerie

PhotobucketThe Teacher Wife

Funky Fresh Firsties

...And They All Fall Down...

Georgia Grown Kiddo's

Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


 
 

Michelin, Jessica, Greg, Erin, Alison

 

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

Check out AMD’s Video on their ReLive edition of Radeon here: 
https://www.youtube.com/watch?v=nRSm12lwRe4

[I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

  • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
  • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
  • Reboot
  • Install AMD Drivers via the Download from their Website
  • Reboot

That’s it!

After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

* The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

  • Fontstruct (where I created the font by hand): 
  • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

  • Fontspace: 
  • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
[email protected]

Usage License: (Creative Commons, Attribution License, 4.0)
You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

Edit:
 I may return and add some images and examples of the font… Soon™
Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

Becoming a GI Joe

All carbohydrates have a value on what is known as the `glycaemic index’ (GI), which indicates how quickly that carbohydrate is metabolized by the body and converted into glucose. The lower a food’s GI, the longer it takes to be converted. Foods with the highest GIs are the ones that will have the most profound and immediate effect on your blood-sugar levels. All the carbohydrates on a weight- loss and insulin-balancing regime should come from the lower ranges.

There are two indexes: the glucose standard, which rates glucose as having a GI of 100 and the white bread standard, which is based on white bread being equal to 100. Other carbohydrates are assigned comparative ratios based on these figures. It doesn’t really matter which index you adhere to, for they both give a pretty good – and sometimes surprising – insight into the speed with which certain carbohydrates are assimilated into the bloodstream.

Diet Start

Below are a few GI values of common foods, based on the glucose standard. Of course you are not expected to remember each specific food’s value, so to make things easier, opposite are two simple tables showing you how to classify fruit and vegetables into those with a low GI value (under 20), those with a medium value (20-60) and those with a high value (over 60).

Density values

Each carbohydrate can also be evaluated by its density value. This is the amount of usable carbohydrate in relation to fibre and water content – the more fibre and water a vegetable or fruit contains, the less usable carbohydrates it will have. The most dense carbohydrate foods are pulses, wholegrains and starchy vegetables, particularly when they are cooked and their fibre is broken down, these will raise your insulin levels, so always be aware of this. The table opposite contains a list of low-density carbohydrates that should form the basis of your carb intake on a low-carb diet.

Not only do many fruits feature highly on the GI scale, but a few should also carry a carbohydrate density warning sign. Bananas, dried fruit and concentrated fruit juices are all a bad idea if you are trying to balance your blood sugar levels. It is best to avoid these totally until your blood sugar and weight have normalized, and then carefully re-introduce them into your diet.

Focus on fibrous vegetables that can be eaten raw or steamed – the type that lose a lot of water whilst cooking. This will mean increasing your intake of leafy green vegetables, such as Swiss chard, green cabbage, kale, bok choy, rocket, spinach and endive.

The Ten Steps of Body Clock Diet

The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

  1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
  2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
  3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
  4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
  5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
  6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
  7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
  8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
  9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
  10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

April Nitzsche on WBIR Knoxville

April Nitzsche was recently on WBIR as part of their Workout Wednesday. In the segment April demonstrated some exercises you can do at home and in the gym with kettle bells for a good workout. She also mentioned the new Maryville opening location as well as the Bearden location.

You can also view the video here.

Back to School – Math Edition

It might be time to think about renaming my blog, because I’m really excited about teaching math this year! It all started when I read the book Number Talks over the summer.

I’ve always understood the importance of mental math and computation strategies, but I’d never really understood how to teach it. It felt like something kids either had or they didn’t. This year, however, I decided that we’d start doing number talks from day #1, and I’m already blown away by how my students are developing as mathematical thinkers. They’re able to solve complicated addition problems in their heads — no paper allowed — and they’re articulating their strategies well. I’ve been introducing a new strategy every 2-3 days, and it’s been awesome. We’ll be moving on to subtraction strategies in a few days, and I have high expectations for that to.

To help students with the mental math strategies, I made a set of posters that describe each strategy with an example of how it works. There are 20 posters in all — one for each strategy described in the book.

The complete set is available in my TpT store, and they’ll be on sale for 28% off this weekend as part of the Teachers Pay Teachers back to school sale if you use the code BTS13.

As I’ve been working on order of operations and number sense with my fourth graders, I also introduced the four fours problem. The premise of the problem is this:
Using some arithmetic combination of four 4’s, can you write an equation for each of the numbers from 1-100? Here are the rules:
  • You may use any combination of addition, subtraction, multiplication, and/or division
  • You may combine numbers, e.g., use 2 of the fours to make the number 44
  • You may insert decimal points
  • You may use a four as an exponent
  • You may use square roots
  • You may use factorials, e.g., 4! is equivalent to 4 x 3 x 2 x 1 = 24
  • You may use overbars to make a decimal repeat
  • You may NOT use any digit other than a four
  • You MUST use all four 4’s in each solution

Before I go on, let me give two caveats. 1) I didn’t expect all of my students to be able to handle all of these rules. Square roots, exponents, and factorials are WAY above my fourth graders heads generally, but I did have a handful that could handle it. And there are plenty of solutions to be found that don’t require those operations. 2) This problem freaked out the parents more than it scared the kids, I think. I had a few panicked parents that I had to talk down while we were working on this, but in the end, it was well worth it. My students were so excited about math and problem solving as we worked through this problem. It was homework each night to try to find a few more solutions, and then we’d add to a chart during math class. Look at all that my students accomplished after just two days!

We’ve filled in a bunch more solutions since then, but of course I left my camera at school this weekend…
Finally, in honor of the big back to school sale on TpT, I’ve bundled four of my favorite math resources into a back to school math pack for this weekend only. 
Sold separately, this is $17 worth of products that I’m selling this weekend for $10, but after Monday, the bundle will no longer be available in my store. So if you’ve had any of these on your wish list…

Hope everyone had a great week! I’m still learning how to juggle grad school with teaching, but I’m hopeful that I’ll still be posting at least once a week.

Off to start catching up on blog reading and filling my cart for the TpT sale! Have a great weekend!

WORKOUT ANYTIME on Cincinnati.com

WORKOUT ANYTIME on Cincinnati.com

The article was written by Cincinnati Enquirer Business Reporter Bowdeya Tweh and was based on interviews coordinated with Tony Petrocelli and WORKOUT ANYTIME Vice President of Development Randy Trotter. The article begins with details about the opening of the WORKOUT ANYTIME in Montford Heights. The article gives information about the gym and about the company, as well as information on development plans in Ohio.        
Workout Anytime

You can view the full article here, and view contact information about WORKOUT ANYTIME’S new gym in Montford Heights here.

The Best Text for Teaching How to Write and Revise Leads

My fourth graders hate revision. They’re often offended by the mere suggestion that they hadn’t nailed the perfect lead to their stories in their first draft.

I’m used to this. I see it every year in writer’s workshop, especially at the beginning of the year when we’re writing in a genre for the first time.

And every time I see this, I become more determined to break them of this thinking.

Today, we were working on the Common Core State Standard W.4.3a – Orient the reader by establishing a situation and introducing a narrator and/or characters; organize an event sequence that unfolds naturally.

My favorite story to use for this is standard — especially with fourth graders — is The Teacher’s Funeral by Richard Peck.

This book, set in a small Indiana town with a one-room schoolhouse, has the best opening line of a children’s book ever.

If your teacher has to die, August isn’t a bad time of year for it. 

Richard Peck keeps it going from there, building an incredible introduction. You can read the entire first chapter here.

Today, I started our writing lesson by reading this chapter to them. I have the Kindle edition of the book, so when I read it, I can project it on our ActivBoard so the students can follow along as I read. They laughed throughout the intro and were immediately hooked, begging me to choose this as our next chapter book read-aloud. Score one for the objective of “hooking your readers!”

I then asked them how many of them thought that introduction was the one that was in the first draft of his book.

One or two hands went up.

Richard Peck shared in an article called “In the Beginning” (Horn Book Magazine, September 2006, pp. 505-508) that it normally takes him 24 drafts of his lead before he’s happy with it. TWENTY-FOUR!

And here I’m asking my students to take a second pass at their writing.

I shared that little nugget with my students before we reread the first chapter. As we read if for a second time, we focused on the characteristics of his writing that made it such a great lead.

Here’s what my students noticed, compiled into an anchor chart:

Once we finished the chart, I had them go back to a piece of writing they’ve been working on and try to write a different introduction. Some students tried changing the point of view, others jumped into the action or started with dialogue. Whatever the strategy, all of them managed to produce a new version of their introduction, and all were at least a little better than what they’d started with.

We’ll get this revising thing down eventually…

What are some of your favorite books to use to teach students how to hook their readers? I’d love to hear about them in the comments!

Franchisee Profile: Marc Flame

Franchisee Profile: Marc Flame

Marc Flame is originally from the Bronx in New York, specifically Riverdale. Growing up, Marc spent every summer on Long Island at his grandmother’s beach house and loves the outdoors. After graduating from JFK Highschool, Marc’s parents moved to South America where Marc learned to speak basic Portuguese. After living in Brazil for a while, Marc moved back to New York where he attended New York University. He graduated in 1981 with a degree in Economics and International Business. Upon graduation, Marc spent much of his time on Wall Street starting his career Bankers Trust Company. Marc eventually became Chief Financial Officer at the banks Technology subsidiary. During Marcs’ tenure he established a successful record of improving operational efficiency and profitability. After fourteen years at BTCo, Marc left and joined Citigroup. Marc spent ten years within the Finance Organization of Citigroup. He then joined the CBS Corporation where he served as CFO of the CBS Technology organization.

After doing some traveling, Marc decided to relocate from Chicago to Atlanta where he began researching franchises to invest in. After much research Marc decided that Workout Anytime was where he wanted to be. Not even three weeks after watching the Workout Anytime franchise video, Marc signed for his first franchise. He now owns the first Workout Anytime located on the South side of Atlanta.
How did you learn about the brand? 
I was researching different franchises and was heavily focused on the fast-food industry when I came across Workout Anytime. I watched the franchise video and was immediately hooked. I knew right then that was what I wanted to invest in. Not even three weeks after seeing the video I met with Randy the entire senior WOAT team. It felt like a family and I signed with Workout Anytime after that meeting.
Why did you choose an opportunity with Workout Anytime? 
I’ve always wanted to own my own business. I worked at a Baskin Robbins in high school and it was some of the best times I’ve ever had. I have always enjoyed doing my own thing which is why I started looking into franchises. I chose Workout Anytime because I am very interested in the Workout Anytime model and I really wanted to do a franchise in a market that really needed it. 
Do you have any development/extension plans? Add units? Timeframe? 
I would like to eventually expand. I do not have a multi-unit sign at the moment, but the goal is to have 3-4 locations within 4-5 years. I am trying to open one every year and a half. Currently, I am working to be the most successful location rather than building out more units. When you talk about franchises people have glass ceiling expectations with what you can achieve with any one location. The Workout Anytime model allows me to push the boundaries, and ensure the opportunity for many members to enjoy all the advantages provided to Workout Anytime members.
Are you involved in any charities or involved in the community in any way? 
I am learning more about the Riverdale area each day and would love to work with charities and get involved with the community once I get to know it better.
Do you have any other interesting hobbies or passions?
I love spending time outdoors. Anything outdoors such as going to the horse stables with my daughter, 
watch my son dirt bike on the trails, and go to the beach as often as possible.

Raw Gameplay (Unedited) – Battlefield Play4Free (32 Players, Saiga-12 Won from The Daily Draw)

Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a draw of eight and it will generate an item for you.

The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

In this video, I present ‘Raw Gameplay’ (unedited gameplay) of BFP4F after winning a Saiga-12 Shotgun for one day’s usage on my Medic via The Daily Draw. I had joined a 32-player server (running a Rush map) that was nice and full (16 soldiers per side). After getting the kinks out and getting used to the controls again after not playing for a while, I think things picked up as the game went on.. I was soon having fun arming MCOMs and healing and reviving. Near the end, I realized that my Aircraft controls weren’t set/got reset, as my mouse wasn’t ‘inverted’ and I couldn’t fly the helicopter at all, haha.

Recorded game: Battlefield Play4Free, Online FPS
Recorded with: Bandicam (Registered Version) @ 864p
Recording codec: MPEG-1, 70% Quality, 30fps

This video was also a test of a few things (though not an ‘Official Testing Video’): I was messing around with different settings (resolutions, quality settings) to see how low I could set things before the quality suffered too much. This is of course, something VERY relative and what looks ‘good enough’ to one person, looks ‘like crap on a cracker’ to another person. What I was testing here was, what seemed good enough to upload to YouTube (since it recompresses anyway) and still be enjoyable, while making the recorded file as small as I could via Quality settings (which limits the bitrate somewhat) and resolution size (the larger the resolution, the more bitrate/filesize that would be required).

As I have stated in earlier articles talking about Quality, Bitrate and Filesize, I still find that going below 60% produces too many compression artifacts (macroblocks and ‘trails’, Gibbs effects and more) for many games, especially if there are large dark areas (which would get compressed more highly and have these compression effects occur in them). This doesn’t happen with all games however; some games are fast-moving and/or do not have many darker/flatter areas and using 50% quality doesn’t look too bad, even with the MJPEG codec. It’s a balancing and testing game, as some games (especially with text) look fine and others look very bad (the compressor will try to allocate more bits around edges like text and compress even more highly then, the flatter/darker areas in a scene). I have done recordings of news streams and other things however, that allow for a very low quality recording setting (down to 20%), but that is mainly because the source itself is of a low quality (many streams are highly compressed and there is not much ‘extra’ compression artifacts produced by recording it in a lower quality/bitrate, especially if you are going to downsize for the final output video).

For most games, I found I could go down to 70% Quality comfortably – as long as the resolution stayed ‘higher’ [720p or higher]. With lower resolutions, the bitrate/quality reduction means too many ‘casualties’, as 30% of a 1080p recording isn’t that many pixels when you consider the screen size; but one-third of a 480p recording is a huge amount of the already small screen being ‘lost’ to compression. Thus, with some testing (again to what looks “ok to me“) I arrived at a middle ground of 864p, which maintains decent clarity of text and is large enough to discourage overcompression of darker/flatter areas. For keeping recorded files small and downsizing to 720p HD, it looked fine to me in tests – and on some games, doesn’t look that bad even if you wanted to upsize to 1080p HD (clear text was maintained, etc).

So, enjoy this first installment in an ‘unofficial’ Video Series here at The Game Tips And More Blog: “Raw Gameplay” of Battlefield Play4Free. If you like the game, play it, tell others about it and buy some stuff from the Online Store and support it!

See You In The Game!

Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material.

Spending Your Money Wisely with Quality Food

Wherever possible, it is best to grow your own food. This is a help with the family budget. But many excellent articles of food may not grow well in your particular locality. They must be brought from a distance and exchanged for cash. If you are on a limited budget, how can you spend your money for the greatest value in food? This is a very practical question.

Foods which are manufactured and refined usually cost much more than those in the natural state. At the same time there is danger that some of the minerals and vitamins have been lost in the manufacturing process. In such a case you lose out in two ways, first, by paying much more for the product, and second, by the loss of essential elements from the food. This is not a wise way to spend a large portion of your money. Do not be carried away by all the glowing advertising material on the package or container.

Take the question of breakfast cereals so widely advertised today, particularly those flakes that have been coated with sugar. Such breakfast food is scarcely worthy of a place on your table and in your family budget. Dry cereals in any form offer less nourishment than do the raw materials from which they are made. Much of real value is lost in the manufacturing process. And when a sugar frosting is added, the effect on young children is far from good. That sugar coating is the worst feature of all. This excess sugar increases the possibility of dental decay and often results in chronic indigestion as well.

Diet Start

Cereals and similar products that are cooked at home are much less expensive than those that are already prepared. The same is true of breads baked at home. They, too, are more nutritious. It does take time to prepare such food. But in the end this saves money, and the whole family will be healthier and more satisfied.

People in well-to-do households may not have much trouble in selecting an adequate diet, provided they take the time to do so. Unfortunately, most of them do not bother. They just eat what comes their way or what is advertised over radio or television. This haphazard way of living is likely to result in serious deficiencies.

The family with limited means must be even more alert to the problem of selecting a diet that is suitable, but not too expensive. They must not allow themselves to be swept away by the flood of advertising so prevalent today. They must buy wisely and well.

Those who live in the country may find the situation a little easier. A small garden, with a few hens and a cow, may enable such a family to live far better than one whose means are not limited. Everything depends on the choice that is made.

Actually you can feed your family better than you think you can. But it does take a little planning. However, people who live on a well-balanced diet are naturally happier and healthier. Such a diet need not be an expensive one. In fact, there are many experiments in rats and other animals showing that a less liberal diet tends to promote a longer life. Many modern nutritionists believe that we live on only about half of what we eat. The rest only compels our hearts and other organs to work that much harder to get rid of the extra food.

Experiments at Cornell University seem to bear this out. A certain number of white rats were used. Some were allowed to eat all they wanted whenever they felt like it. Others were placed on special diets when they were in a rat’s “middle age.” Those rats which ate as they pleased lived 600 days or less. Those on the diet in middle age lived over 1,000 days. The oldest rat lived 1,400 days, and he never had a square meal in his life! It is not the quantity of the food, but the quality, that counts.

Planning Better Meals

Some people become confused over such scientific terms as calories, vitamins, minerals, and so forth. This is quite understandable. But don’t let this scare you too much. Today you can balance your diet fairly well without knowing very much about these various terms. Without going into too much detail, you can reach a good middle-of-the-road plan that is almost foolproof.

During recent years nutritionists have worked out what is known as the “basic seven” food groups. If these foods are included in the diet each day, they will meet the needs of the whole family very well. One does not have to bother with all the endless details of a complicated diet. Just follow this basic plan.

These seven food groups are easily recognized. They should become the foundation of each day’s meals. Some foods from each should be in one meal, others in another. But these essential things should always find a place at some time in the day. Other things may be added as desired. But it is best not to get too far away from this simple daily program. If any of these basic groups are missing in your daily planning, your diet is likely to be deficient in some things that are vitally important to good health.

Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size
Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size

ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured by Troy from The Game Tips And More Blog

Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
Right back at ya’, Beth! 
“Thank You” ~ Sincerely, The Game Tips And More Blog

Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

First Impressions – Google Play App: “Screen Recorder” by Kimcy929 [App Mini-Review]

This article has been initially posted as Text-Only at this time, to speed up publishing, focusing on a certain issue. I will return to this posting and add more data on Quality and Performance, Screenshots and then eventually Share it on Twitter/Google+/etc… Soon™

[This past Christmas, my father gave me a neat little tablet to play on – Thanks, Dad! I have been enjoying the heck out of it, learning what it does (cough how to use a tablet cough), what applications it can run (I can write a Blog Post laying down!) and of course, what games I can play on it, heh. I hope to give some Tutorials/Walkthroughs and Reviews on Games and Apps from it sometime… Oh wait, here’s one now! haha]

The Google Store page for the app, with the ‘Play’ button removed [I felt it was a bit distracting, making people think there might be a ‘video to play’ here at The Blog], replaced with The Blog’s ‘G’ brevity logo version.
The Google Play logo in the upper-left will be used to denote images that come ‘directly’ from the Google Play website/page for the app for these types of App Reviews/Posts (Unedited other than logos or helpful arrows/etc added).

Google Play App – Screen Recorder by Kimcy929

Straight to it: while this app did in fact ‘record the screen’, it could not record the game sounds themselves (‘internal’ gameplay audio), it only recorded microphone sounds (‘external’ audio outside the device). While this is useful for some, especially Vloggers, I was personally looking for a screen recorder for my tablet that recorded gameplay and the audio from the game, for Tutorials, Walkthroughs, etc.**

Also, an issue arose where ANY video I viewed after installing this app (even videos I had on my device BEFORE installing it) only came up as a black screen, with the message:

“…Video Is Playing On External Display…”





Now, I had not enabled any such option, nor did I connect any External Displays…

I did some research online and found many people running into this issue with various apps and devices (tablets, phones, etc). Looking at the App configuration in the Settings of my tablet for Screen Recorder, I found this app giving itself the ability to ‘draw over other apps’ (which it can do to create on-screen writing, or arrows, which it advertises that it can do on the Google Play Store page for the app).

This is fine and these features are no doubt useful; however, I could no longer view any videos with the built-in Video Player (“complete action using > Video”) – I literally could no longer view any videos I had on my device, at all. [Even with third-party Media Players, such as VLC Media Player, simply viewing any videos was now ‘broken’…]

Video playing of the Video portion of Videos on the Video Player that
plays Videos was like, really broken now

Even after disabling this option that it gave itself without prior warning (found in Settings > Apps > ScreenRecorder > DrawOverOtherApps), all videos still came up with just a black screen and that message – that is, just Disabling the Setting did not ‘undo’ the inability to no longer watch videos in the Video Player. Disabling this setting, then Uninstalling this app, then Restarting the Tablet, fixed the issue [in my case, the only way it was fixed].

While this app does record the screen, allows for microphone use, doesn’t seem to affect gameplay performance very much, and seems to have a decent selection of Resolutions and Bitrates (eg. 1280×720, 8000kbps), also having some additional helpful things like drawing arrows on the screen, etc; it does not record ‘built-in’ gameplay audio – which I personally was looking for** – and it gave itself a power which interfered with normal tablet video viewing afterward… Not only that, but it only recorded a few videos before no longer working, with a message just repeatedly showing up stating, “Unfortunately, Screen Recorder has stopped”.

No changing of Settings (of my tablet or the app itself) was able to remedy this or get past it [the message coming up and no video being recorded]. Reinstalling the app made it work again, but after a few recordings, only that message repeating on the screen was the result, once again. Therefore, considering all of the above [but including the fact that the app must have worked for other people, that is, those not running into this ‘Screen Recorder has stopped’ message problem], this app earned Three Stars at Google Play from me, as of the time of this writing.

Being ‘completely free’ (No Fee and No Ads), and having a nice selection of ‘standards’ like Resolution and Bitrate choices, and having ‘extras’ like being able to draw on the screen; perhaps with some improvements to bugfixing, enhancements to how it handles itself (asking/warning what would happen before utilizing the “Draw Over Other Apps” ability would be helpful to users that might run into a problem with it) and adding the ability to record internal gameplay audio**, Screen Recorder could potentially be a very capable and ‘feature-rich’ screen recording application.

3/5 Stars
★★★☆☆


This app (and a shortened version of the above Review by The Blog (to fit on Google Play’s Review area)) can be found on Google Play, at:

Screen Recorder by Kimcy929
https://play.google.com/store/apps/details?id=com.kimcy929.screenrecorder

[Note: I am not affiliated with Screen Recorder or Kimcy929 in any way, and I have not and will not be compensated by them for writing about them here. I am merely a user of their application and like to help others with helpful information, when I can. The information in this post was obtained on an LG G Pad IV, and therefore might vary slightly from your own experience (Settings, Menus, Performance, Problems, etc) – but I hope that it was still found useful in some way.]

** More on this later… I have recently found out that Google has taken away the ability [temporarily?] to record game output AND game audio at the same time (“internal audio”) in the latest Android versions – save for a small number of possibilities on LG and Samsung devices. But, I’ll cover this at a later time, when I find out more solid details…

Hitman: Absolution – First Impressions and Screenshots

I finally picked up the latest iteration of the Hitman Series, Hitman: Absolution, starring Agent 47 as the main anti-hero, id est killing the bad guys but never quite [arguably] becoming one of them. Differing from the last couple of Hitman publications, Absolution has an overarching story, connections being made in a chronological manner throughout the various stages and settings. Characters are introduced and developed via cutscenes, as the plot is pushed further by your completing the next mission for a feeling of engagement in the storyline.

I personally liked this approach, as opposed to the last couple of Hitman games, which seemed like mostly ‘replays’ of old missions from previous games (which in and of itself, isn’t a bad thing). While there were similar settings, such as a Chinese Market Square, they were sufficiently changed enough – especially with the graphical improvements and new gameplay interface – to seem varied enough to be enjoyable. There were even updated versions of [personal] ‘old favorites’ that I waited excitedly for (such as a ‘Hotel’ stage). Slightly more varied than the old versions, if you include the new “Instinct” game mechanic, these levels felt ‘fresh’, even if they weren’t new.

The “Instinct” game mechanic seems like an effort to simplify the game, making it easier for newcomers and those who had trouble with the complexity and scope of the previous Hitman games. Indeed, I remember reading a lot over the years of people saying the Hitman games were “too big” or “too complex” and that it didn’t help the player much at all, as far as where to go and what to do. It “plopped you down in a large area with just a map”, they felt. Of course, that was the draw for all of the other people, the complexity and seeming openness of the game was enjoyed, where you had to figure out everything yourself. You could decide what to skip and what to do and could decide for yourself how to do it. The new “Instinct” mechanic of Absolution doesn’t take too much away from this (you can turn it ‘off’ if desired) and it actually adds to the cinematic feel of the game by taking the ‘player out of playing’, so to speak, which results in more of a feeling that you are ‘playing Agent 47’, guiding him (and using his innate abilities) through the game, as opposed to ‘actually being Agent 47’ and figuring everything out yourself heavy-handedly. I suspect this more objective approach has already been a point of contention since the game was released.

An example of Hitman: Absolution’s new ‘Hitman Instinct’ game mechanic, showing how Agent47 can ‘sense’ enemies in and around the nearby area and estimates where they may be heading.

When utilizing Agent 47’s ‘Instinct’, the game shows where 47 ‘senses’ there are enemies and where they are and shows you on the screen with outlined shapes. It even shows where 47 ‘calculates’ enemies will be moving to, showing you their intended path with a line of flame and where they will stand still with a larger lick of fire. This is where the adrenalin-dipped decision making and primal ‘danger’ awareness kicks in during the game, as a player can choose to set up an engagement with an enemy, or stealthily avoid these paths and points.

For those who do not like or want the new game mechanic at all, it can be turned off, mainly by choosing a higher difficulty level. There are five to choose from and higher difficulties result in more ‘sensitive’ or ‘aware’ enemies, tougher enemies (wearing more body armor one assumes) and more of them. For those who are new to the game or having trouble with it, the difficulty can be lowered as well, with less enemies, enemies with less skill (not as good at aiming) and less awareness (having a bit more ‘tunnel-vision’) allowing you to sneak around them easier. The option to have this game mechanic off or on, at the players choice, is nice and was no doubt included to appease those who would not like it’s hints and guidance. New players (those talking about the games’ difficulty in the past) can have it on and still enjoy the action and storyline as well. It feels like an ‘attempt to please everybody’ – and I assume it will work well in that regard. (I haven’t read any Reviews of the game (to avoid exposure to the material within) before I purchased it, but I assume that once I indulge in others’ opinions, I will see much disagreement on that last sentence).

View of a hotel cleaning supply room from an air ventilation shaft. Click to see Full Size

The game itself felt atmospheric and cinematic. The music changed as action waxed and waned. Enemies ignored or chased you around winding levels that you had to discover and remember. The graphics were spectacular, with detailed textures, dark and gritty lighting and shading. The core Hitman gameplay was there – even if it wasn’t there for very long. This game felt very short to me. Perhaps it was the somewhat simple Television Movie Special plot, perhaps it was the number of missions (although they were split up into sections). Perhaps it was merely enjoying it so much that I wanted more, but just during the course of writing this article off and on, I have completed the game in it’s storyline entirety (not counting Challenges and Item Collection) in just over 20 hours. That doesn’t seem very long, but I suppose it is to be expected in a game that is more like “Max Payne” and less like “Skyrim” (more Action and less RPG). You could keep playing after finishing the main story, select past levels and retry them, doing them ‘cleaner’ for a better score or achievement, or look around and discover new weapons and pathways, or just redo any level you wanted to for fun.

An example of how the levels are split up into sections and how you can select past levels to replay them.
An example of the updated game engine, with higher-detailed character models, textures and environments.
Click to see Full Size

Other than the copy-pasted ‘general population’ mannequin-people utilized in larger crowds (used understandably to keep memory/resource usage of the game down of course – all of the ‘main’ NPCs have good detail to them), I personally liked the attention  paid to smaller details, such as the amount of debris scattered around the levels – things like cups, papers and garbage, all part of the gritty ‘lived-in-ness’ of the environment, adding to the realism. It’s nice to see games that pay more attention to the surroundings/settings these days, as opposed to the stark, clean-floor environments in games of yesteryear.

Overall, Hitman: Absolution was very enjoyable. It was great fun to figure out steps and schemes for the various areas and carry them out with cold calculation. I laughed out loud a few times and grit my teeth in anger at the more difficult parts, playing them over and over again, trying to figure out new ways to accomplish the objectives and complete the contracts. Despite feeling shorter (perhaps just because it was so enjoyable) and despite some changes that others might not entirely like, I still suggest trying it (especially if you are a fan of the previous games in the Hitman series). I personally had a lot of fun with the game – and isn’t that the most important thing?

Have fun with Absolution and See You In The Games!

The Benefits of Jump Training

Watch a group of kids and you will likely see bobbing heads – kids love to jump and there are good reasons for them to jump.   A key aspect of human movement is learning to store energy and then reclaim it as part of a movement cycle. For example up to 40% of the energy required for movement during walking and running is created by storing energy in the leg muscles as the foot lands and then using it during the push-off phase.  The technical name for this cycle is the “Stretch-Shortening Cycle” or SSC.  The SSC takes advantage of the fact that muscles can act as springs:  they store energy as they are lengthened then rebounding in the opposite direction as they get shorter.

Efficient movement takes advantage of the stretch-shortening cycle and muscles are designed to store and release energy in a rhythmic pattern of loading and unloading just like loading and unloading a spring.  In addition, power for all athletic movements is generated by taking advantage of the SSC.     A key aspect of getting the most from this cycle is rhythm and timing which are learned through repetition.
  
There are three distinct phases to jump training:

The Loading Phase – such as landing phase of walking and running where the muscles lengthen under tension to absorb the landing.
The Amortization Phase – where the muscle transitions between loading phase and the Unloading phase.
The Unloading Phase – where the muscles shortens and transfers the stored energy externally like a spring recoiling such as the push-off phase of walking and running.

Jumps can be little – like jumping rope or big – like box jumps.  Start with little jumps.  A great place to start is jumping rhythmically in place with both feet with short fast jumps.   You want to land on the ball of the foot and flex your knees when you land and let your heels just kiss the floor then jump up again and repeat.  Start with really tiny jumps and try to let the elasticity of your calf and quad muscles do the work – done properly it should feel relatively easy.   It will take several weeks to condition the muscles of the foot and calf to be able to do longer sets so take your time.  In addition there are many benefits to performing this training without shoes so the muscles of your foot get conditioned and you have a better feel of the ground.

It is also important to insure your knees track over your toes and do not collapse inward so do short sets (30 seconds or less) of low, fast jumps on both feet and learn to feel the rhythm of the cycle of landing and push off.

Once you master this you can add more height to your jumps after you are warmed up.   Stop each set if you start feeling tired or feel unstable, and recover completely between sets.  Do NOT do jump sets to failure. Eventually you can progress into full squat jumps.   However remember the key to capturing the benefit of the stretch-shortening cycle is a quick rebound after landing.  So if you go too low in the loading phase the pause between landing and rebounding will be too long and you lose the benefit of the stretch-shortening cycle.

Over time you can even progress to single leg jumps or box jumps where you jump down off a height to the ground/floor then land and rebound up.  Take these progressions SLOWLY – it is important to build the elastic strength of the muscles in your foot, lower leg, and thighs over time and stopping BEFORE you are exhausted will prevent injury.  This is why kids naturally like to do short sets of jumps repeatedly – it feels good when done properly!

There are many benefits to jump training including:

Toning the lower body – jumping recruits all of the major muscles of the lower body while at the same time being the ideal stimulus to build bone strength.

Jumping burns lots of calories – once you can build up to being able to do 1 – 4 minutes of continuous jumping like jumping rope you can really rack up the calories!

Jumping pumps up the cardiovascular system – as above once you can jump safely and in good form for 1 – 3 minute sets you will not believe how high your heart rate gets!

Jumping also demands great balance and stimulates fast-twitch muscle fibers.   Fast-twitch muscle is the type of muscle we lose quickest as we get older.   Fast-twitch fibers are not just important for athletes – they are important for preventing falls because the ability to produce force quickly is important to be able to react quickly when your balance is unexpectedly challenged like stepping off a curb you do not see!

Jumping is the best way to build the strength of bones – bones need impact and force to stay strong. The key is starting with small jumps and gradually building the height of jumps and time spent jumping.

There are many ways to build jumping into a workout such as doing some skipping drills which can even be done on a treadmill safely once you get the hang of it.


It is also worth working with a trainer to help you develop proper jumping mechanics and the stability you need to land properly which are pre-requisites for safe and effective jump training.

Taking pills and supplements

Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

Over-the-counter (OTC) diet pills

The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

Diet Start

Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

Supplements

To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supplements that may help.

Key supplements

Magnesium

A fundamentally important mineral that counters insulin resistance.

It is hugely deficient in the Western diet. Consider taking 230-600mg per day, unless you have suffered kidney failure or have a high degree of AV heart block.

Quercetin

A flavonoid with powerful anti-inflammatory properties that helpsto control high insulin levels and inhibit fat production. Take 200-400mg three times a day before meals.

Omega-3 fats

If you don’t eat fish, take 1,000-3,000mg of fish oil daily in capsule form. Vegetarians can use flaxseed oil or crushed flaxseeds instead of fish oil capsules. Try flaxseed oil in salad dressings (or even in smoothies) to ensure you get enough of this health-enhancing fat.

Chromium

A trace element that plays an important role in carbohydratemetabolism and regulating blood-sugar levels. It has proved useful in treating diabetes and shown to be effective in encouraging the body to lose fat, not muscle, when dieting. Take 400-600mcg of chromium picolinate or chromiumpolynicotinate a day.

Lcarnitine

Used extensively by athletes to ensure maximum performance inendurance or aerobic sports. It is also useful for weight loss because it is involved in burning fat in muscle cells. Take 1,000-3,000mg per day.

DIETARY MYTH

Myth: I will get quicker results if I use diet pills.

Fact: there are no shortcuts — no magic pills. Losing weight sensibly and safely requires a multifaceted approach that includes setting reasonable weight-loss goals, changing eating habits and getting adequate exercise. Appetite suppressants (diet pills) may help some people in the short term, but they are not a substitute for adopting healthy eating habits in the long term.

It’s Not Just You™ – Paladins (Beta), Having Issues Not Starting or Not Running In 64-bit Mode, Battlegrounds [Notification, Updated As Encountered]

[Currently, this post is mostly in Text-Only Mode, to speed up the ability to publish it… 
I may return to add some Images and/or Screenshots in the future.
This post will be Updated for the next few days, as I encounter new related information.]

If you are trying to play the newest addition to Paladins, Battlegrounds, which is being released in Alpha Testing Stage in their Latest Update – and you are having issues with either (1) the game not launching/starting or (2) the game running in 32-bit mode [which stops you from being able to enter the Battlegrounds, which requires 64-bit mode] – just letting you know, It’s Not Just You™…

For the past little while, I have been trying to get into Paladins and try out this new Game Mode, and take a look at any new changes; but I have been running into multiple issues with the game itself. If related Paladins Forums ‘everywhere’ (Steam, Reddit, Official Forums, etc) are any indication, many, many others are having issues as well.

I wanted to take a moment to make this posting because, even though it seems there are a few people that have ‘gotten it running’, there are many others, like me, that have not. I wanted to share this experience and related information, so that others may know that, well… It’s Not Just Them.

Since I have run into multiple issues and have tries multiple steps so far, I will share them here in Point Form as a list:

Issues Seen/Encountered:

  • Game not starting [Launcher will start, but game itself will not show up]
  • Game not stopping [Game will not Terminate, Steam says it is Running still, but it is not, or has not started]
  • Game not running in 64-bit mode [Game starts in 32-bit Mode and therefore The Battlegrounds can not be tested/run, as it states in-game “64-bit Mode Required”]
  • Cannot Verify Integrity Of Game Files, via Steam [Steam states to ‘exit any game files or tools’ related to the game, but none are running]

Steps Taken/Tried:

  • Put “-Use64 [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
  • Put “-dx11” [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
  • Checked “Use 64 bit Client” in Launcher Options [this has never been ‘unchecked’ by me]
  • Verified Cache [‘double-checked’ the game files through Steam, to see if they are what they are supposed to be]
Unfortunately, since I cannot make the game ‘run in 64-bit Mode and enter The Battlegrounds’ in a repeated a reliable manner – I cannot make a section containing a ‘Fix’ at this time… I will continue to observe various Forums and Support Responses, try various Suggested Steps (from the Developers and other helpful Paladin Players (there are a lot of them out there!)), and see if I can make any progress that results in stable and repeatable game launching and gameplay. If I do, I will return here and add it as a ‘Fix’ section. 
For now, despite them not working for me/on my system, there are a few isolated people that have had success with some of the Steps listed. If you are experiencing any of these issues with Paladins at this time, try some or all of them above. Perhaps one of them will work for you, too. 
Good Luck with it – and try to stay positive, remembering – It’s Not Just You™!

Trip to Hyderabad cont…..

The assignments are over and I am on my way home. The drive from Chilakaluripet to Vijayawada was uneventful; so was the flight back to Hyderabad. I had arranged to be picked up and was met at the airport; the drive back from the Hyderabad airport to my guest house was not usual as the vehicle I traveled did not have air conditioning. So my senses were overloaded by the melting pot that is India; the sights, the sounds and the smells greeted me along the way to my guest house. The only disconcerting factor was the pollution levels. The smoke from the vehicles combined with the dust that they kicked up hung as an orangish grey cloud over the city. There were times that I found it difficult to breathe so had to cover my mouth and nose.

On reaching my guest house I packed all my bags and turned in for the night as I had to get up at 3.30 AM to start my last leg of the journey. Before turning in I had spoken to the driver who was supposed to drive me to the air port in the morning. As a matter of caution I obtained his mobile number for contingencies. He faithfully promised to be there at 4.20 AM to drive me to the airport. The plan was that I had to be at the airport one hour before (Domestic flight from Hyderabad to Chennai) and it took one hour to drive to the airport.)the scheduled time of 6.20 AM

The next morning I was ready by 4.20 and SMSed the driver; then came 4.30 still no driver. I got a bit concerned since we had not planned for any delays. So I went to the security post of the compound and hailed the security. As usual the security guard was huddled up in a corner of the security hut fast asleep. I woke him up and found that he did not speak a word of English. So using sign language and my broken Hindi/Urdu managed to convey the situation to him; finally he got on his bike (Literally) and went and woke the driver who slept in the other corner of this large compound.

I left for the airport around 4.50 AM and made it on time for the flight. The rest of the journey went as scheduled and without incident. I am back at home; and finishing all my reporting before the next assignment.

CONCEPT INTERIOR DECORATORS NYC

Interior Decorators NYC

Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

Interior Decorators NYC
Interior Decorators NYC

Paperless Mission #8: Conduct and Archive Running Records (iPad)

This is the eighth installment in my Go Paperless! Challenge series. You can see the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #8: Conduct and Archive Running Records 

At least once each six-week term, teachers at my school are supposed to conduct a running record as a guided reading level assessment. We use the Fiction Level Reading Assessments provided by the Teacher’s College Reading and Writing Project, and before my move to paperless, this system was a mess for me. I’d have one binder that was all the student copies of texts, and then I’d have a huge paper pile of blank assessments that I could fill in as I worked with students. Invariably, I’d have a ton of kids reading on level S, for example, and I’d run out of my copies of that assessment, so it was back to the copier to make more. Then I’d have to deal with recording the data and filing them all, and it was a bit of a nightmare.

Paperless rocks. The nightmare is over.

In this tutorial, I’ll share how I’m using Dropbox, GoodReader, and Evernote to conduct running records anytime and anywhere on my iPad. You might want to get a good iPad stylus, too, if you like that “pen in hand” feel.

Step 1. Download all of the running records to a folder on Dropbox.

You will also want to print one student copy of each assessment. I still keep all of those in page protectors in a binder so I can hand one over for the student to read off of, but I never make copies of these. It’s a one-time paper expense that I’m happy to live with.

Step 2. Import the guided reading assessments into your GoodReader app.

Once you’re done saving them to Dropbox, open up GoodReader and connect to DropBox. There’s more information about this in the previous GoodReader tutorial, Mission #6.

Step 3. Choose the appropriate level, and open up the teacher copy in GoodReader.

The first time that you want to annotate the document, you’ll be prompted to “Create an Annotated Copy” or “Save to This File.” You will want to choose “Create an Annotated Copy” so you don’t lose your blank copy. Otherwise, you’ll have to download these files every time you want to use them, and that’s only marginally better than running to the copy room — trust me.

Step 4. Use the annotation tools to mark up student reading as you normally would. 

I won’t lie — the first couple times I did this, it felt a little awkward. You have to remember to save the document if you’re switching between tools or trying to scroll/resize. But it does get better quickly, I promise! The more you use the tools, the more fluid your movements will be. It didn’t take me long to get back to the level of proficiency I had with paper copies, and while my writing is a little messier on the iPad, it definitely gets the job done.

Step 5. Rename the file using the manage files option on the home screen of GoodReader. 

To get back to the home screen, tap the center of your screen — away from any annotations — and it should show you the main menu or “My Documents” up at the top left.

Step 6. Move the renamed running record over to the student’s notebook in Evernote.

To get there, go into Manage Files again, and then select Open in. . . 

You’ll be prompted to flatten annotations. Make sure you choose this or your annotations may be lost. 

Select Evernote, and it will launch your Evernote app. From there, you can move it into the appropriate notebook and type in any notes that you want to remember about the student’s reading.

Extra Credit: Create a simultaneous audio file in Evernote.

This is something that I’ve been playing around with lately, and I think the possibilities for this are amazing. Once I have everything set up so that my student has the student copy of the text and I have the right running record file open in GoodReader, I go into Evernote, open a new note, and start an audio recording using the microphone icon. I tell the student to start, and then I use 4 fingers to swipe quickly from right to left across my iPad. This takes me back to GoodReader (or whatever my last open app was) without having to go through my home screen. When the student finishes, I use the 4-finger swipe in the opposite direction to pause the recording.

In the end, I have an .mp4 audio file of the student reading in addition to my annotations on the running record. This is great because it’s evidence I can use in RTI and parent-teacher conferences, and it also enables me to play back the audio so the student can hear him or herself read — something that rarely happens. We can then talk about patterns I’m noticing and ways to improve reading fluency. It’s a great teaching tool.

Your assignment: Try doing a few running records on your iPad and leave me a comment about how it’s going. I’d love to hear other ideas or suggestions to fine-tune this process, too. I’ve only been doing it for about 6 weeks, so I know there are things that could be improved. Hopefully this is enough information to get you started, though!

Thanks for reading!

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

This small apartment is an example of how to make the most of a limited space.This live well in apartments provided with large windows giving good natural light, open spaces and good storage options, including a large sub basement. The lounge is spacious and decorated in bright materials.

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

Upstairs is a beautiful model Dutch prosecutors. Create the mural are welcomed into a room like this.The the kitchen is located between the lobby and hall, and it offers plenty of cooking space. It is an ingenious closet in the hallway. As you can see, the secret of this event to find creative storage.

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

10 Must-Have Tools for the Busy Teacher

This year was uniquely challenging for me. I had my biggest class ever (28 students) , and I was co-teaching all day with teachers and paras from the special ed department–also a first. Meanwhile, I started working on my PhD, and my toddler constantly kept me busy. My plate has never been so full!

If you’re a teacher who often feels pulled in every direction, then this list is for you. These are my top 10 tools for juggling it all. Hopefully you’ll find some to use as well!

1. Nozbe

Nozbe is the ultimate task list manager. You can organize by projects — school, work, home, etc., create recurring tasks, and so much more. I can access it from any device, add attachments, and email stuff to my to-do list. I started out with the free version, and I quickly upgraded to the paid version. At $96/year, the paid version has a hefty price tag, but this app was SO much better than any other task manager I’d tried, and it’s been worth every penny. If you’re someone who has lots of projects going at once, this app is worth exploring.

2. Evernote

This is my brain online. All of my coursework and notes are in Evernote, and all of my anecdotal records and student work samples are in here as well. I was able to use the free version for many years, and then once my husband and I decided to go digital with all of our financial documents, etc., I upgraded to the premium version. At $35/year, it’s pretty affordable.

3. Dropbox

 I don’t think I could function without Dropbox. I switch between so many devices between work, home, and school each day, but Dropbox allows me to keep track of everything. All of my lesson plans, TpT purchases, readings for class, and more are in my Dropbox account. I’m still living off of the free space, but I’m getting the daily reminders that my Dropbox is nearly full. Might need to upgrade that soon, too. Premium accounts offer 100 GB of storage for $99/year.

4. GoodReader


 I’ve used this app a lot with my students, but I’m finding it to be totally clutch for my grad school stuff, too. I’m doing tons of research for my courses and scoping out dissertation ideas, and GoodReader allows me to annotate all of the PDF’s I’m amassing. I’ve created a folder on Dropbox for all of the articles I’ve gathered, and I can sync that folder to GoodReader so I can read it all on my iPad. I can also send it back to Evernote when I finish. One of my dear friends told me that I’d have laundry baskets full of research cluttering my house while I worked on my PhD, but not so…It’s all electronic!

5. GoogleCalendar

I have a variety of calendars on Google — class schedules, deadlines, school events, etc. Some of these I share with my husband so we can both be aware of each other’s events. Other calendars I share with my students and their parents so they can be aware of upcoming events and tests. I like that all of my calendars are color-coded so I know which calendar I’m looking at, and I can select/de-select different calendars to narrow my focus if I’m looking for something in particular.

6. YouCanBook.Me

This free site allows me to share portions of my calendar with parents so they can schedule parent-teacher conferences. I choose the days they can see, set the times they can schedule, and manage the maximum time blocks they can reserve. They don’t get to see any of the events on my calendar, just whether I’m available or not. If they reserve a time slot, it will automatically add it to my calendar and send me an email. It’s eliminated the back-and-forth process of conference scheduling and allowed me to manage my time better.

7. Planbook.com

Since I was co-teaching this year, I needed to find a way to share my plans easily from week to week. I tested out Planbook in August, and I loved it. I like that you can extend or bump lessons, attach files, and customize the fields that appear. It’s a great resource that’s keeping me much more organized. You can get a free trial of it before paying the $12 for an annual subscription.

8. Typinator

This is a tool that’s new to me, but Typinator is a text expander tool. There are several pieces of text that I find myself typing or copying/pasting over and over. Typinator allows me to create typing shortcuts for all of those. For example, if I want to type my blog address as a hyperlink when I comment on someone’s blog, I can simply type “~bl” and it will place the text there for me. I also use it for standard replies to emails such as when parents email me to say their child will be absent. I can type “~abs” and it will write: “Thanks for letting me know about the absence. I hope your child is feeling better soon! Today’s assignments will be posted on our class website, and let me know if there’s anything else you need.” Four key strokes = all of that. I find typing way faster than using the mouse, so this is a time saver that quickly adds up. It’s only available for Macs, and it’s priced in Euros (converts to around $36 US), but I use it all the time.

9. GoodReads


Distinct from GoodReader, GoodReads is an online community surrounding books. It allows me to keep track of the books I’m reading and which books I want to read next. As I’m starting my dissertation research, I’m constantly finding book titles that I want to check out. Similarly, there are lots of teaching books and children’s books that I want to investigate someday, and GoodReads helps me organize all of that. Best of all, I can use its scanning feature to scan barcodes when I’m browsing in the bookstore.

10. Edmodo

I used Edmodo a lot for collecting student work and grading tests/quizzes this year. It managed all of the submissions and kept the work organized for me so I could be more efficient with tracking these things. It also allowed me to create assignments, give and grade quizzes, communicate with students and parents, and so much more. This is a great free learning management system that was a centerpiece of my classroom this year.

With the exception of Typinator, which is only on my computers, all of these apps are cloud-based or mobile-friendly so I can get to them from any device. When I’m shifting between my iPhone, iPad, laptop, and desktop, that’s critical. I may be busy, but I can get to my projects anytime, anywhere, and I’m not hauling around tons of materials everywhere I go. These tools boost efficiency and minimize life clutter.

What are some tools you’re using this year to help with productivity? I’d love to hear more recommendations in the comments.

This post contained some affiliate links meaning that if you click on the link and purchase the app, a small part of your subscription cost will go to me instead of entirely to the company. I’m only recommending products that I highly use and pay for myself, however, and I hope you’ll find value in these resources as well. 

MODERN RESIDENCE LAKE HOUSE DESIGN BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

See all of its 340 square meters, the lake house designed by David Guerra Architecture located in Minas Gerais, Brazil. The very steep terrain, as the permit was built by architect has the opportunity to build a box-shaped structure with overhanging balconies. Residents are a mother and her adult son, so the house must meet their need for privacy and comfort, and entertainment. The landscape box provided by an excellent situation increases the value, while the collection is very personal spaces. Benefits son of a bedroom with a separate entrance, located on the ground floor, next to the playroom. Gourmet kitchen is also located on the lower floor where there are also two additional bedrooms and a service area. Balcony and terrace make the connection to fresh air and beautiful scenery. The first floor features a garage, laundry room, living room and dining room, balcony, a guest room and master bedroom.

This is a nice place to live, providing a platform for entertainment and relaxation for its residents and their guests, do not you think?

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

Free Weekend – Overwatch and Fallout 4 [Notification]

Just a quick notification for those that didn’t know, that this weekend is a Free Weekend for two great games: Overwatch by Blizzard Entertainment and Fallout 4 by Bethesda Softworks.
To commemorate this amazing alignment of the planets that these two behemoths occupy, I created this ‘Mash-Up’ Image Header as a Reminder, which I will release as a Full-Sized Wallpaper, for fans of these two franchises, once it is complete… Soon™

A big fan of both companies’ products, I was so excited about it – but I haven’t had a chance to play yet! So, I’m trying to help out all of you fellow gamers and notify you that these games are Free and Playable all weekend – including being sold at lowered prices – but it’s almost over! Get out there and jump in – and have fun! GOGOGO

See You In The Game!

The Vital Acid—Alkaline Balance continue…

Excess salt intake can also severely upset the body’s water balance. Along with potassium, which also occurs naturally in fresh foods, the sodium in foods and in salt itself (which is sodium chloride) plays an important part in the movement of electrons through the body’s water- based protoplasm. This is why sodium and potassium are known as electrolytes. Potassium tends to concentrate in the cells, sodium in the fluids outside the cells. The balance between sodium and potassium, when it is right, sets up a dynamic tension that makes it possible for the living cells to react quickly and efficiently to nerve stimuli, to exchange nutrients and wastes easily through the cell wall, and to maintain the proper interior and extracellular water balance. Too much sodium, which most of us get from eating salt, upsets this balance altogether and can cause troubles. It forces the body to hold on to extra amounts of water to make up for the extra salt one has eaten. Tissues become bloated, and this salt-caused edema can interfere with the blood’s oxygen transfer to cells as well as creating extra pressure against the blood vessel walls themselves. These are some of the reasons the Lifestyle Diet eliminates salt both in cooking and at the table. It relies instead on fresh and dried herbs, garlic, and spices for seasoning.

Diet Start

Throw out the Coffee

Caffeine, a trimethylated xanthine, is found in coffee beans, tea leaves, cola nuts, and cacao, from which chocolate is made. Together with nicotine and alcohol, it makes up a trio of the most widely used psychoactive drugs in the world. The xanthines are stimulants to the central nervous system. They increase heartbeat rate, increase the volume and concentration of acid in the stomach, relax the smooth muscles in the body, raise blood lipids, stimulate the cerebral cortex (which means they heighten the intensity of mental processes), banishing drowsiness and feelings of fatigue. Caffeine and alcohol also have a diuretic effect on the system, causing frequent urination.

The average cup of coffee contains between 100 and 150 milligrams of caffeine per cup, instant coffee somewhat less, tea between 60 and 75 milligrams, cola drinks between 50 and 60 milligrams. This means that if you are drinking four or five cups of coffee each day you are getting a dose of 700 to 750 milligrams of caffeine. To any pharmacologist a dose over 250 milligrams is considered large, although about a third of people in the West get twice as much each day and one person in ten actually imbibes more than 1,000 milligrams of the drug caffeine every twenty- four hours. The full long-term implications of drinking coffee (and, to a lesser degree, tea and cola drinks) are still not clear. However, enough is known already to inspire any woman concerned about the preservation of her health and beauty to give them up completely. For caffeine is a stimulus you do not need on a healthful low protein, low-fat diet high in unrefined carbohydrates.

The link between caffeine intake and anxiety symptoms has been well established. Dr. John Greded, associate professor of psychiatry at theUniversity of Michigan, and his colleagues and others have reported that high caffeine consumers have statistically significant elevations in anxiety scores. The risk of developing peptic ulcers is also 1.4 times greater among coffee drinkers than among non-coffee drinkers. There is now evidence that coffee consumption by pregnant women can be dangerous to the unborn child Caffeine has been shown to cross the placental barrier where its mutagenic and perhaps even teratogenic potential may cause genetic changes and, therefore, birth defects.

Finally, a daily intake of caffeine from coffee drinking is the same as continuing to supply your system with any other drug to which it has to adjust and which ultimately it has to detoxify and eliminate. One of the main principles of any long-term diet for health and beauty is, never add to the body anything which is not necessary and with which it has to deal. The fewer toxic substances there are, the less contribution they will make to tissue sludge, premature aging of skin, and the subclinical vitamin and mineral deficiencies which result in falling hair, breaking fingernails, chronic fatigue, and mental disorders. In the Lifestyle Diet, coffee, tea, cola drinks (even those without sugar), and cocoa are out. Instead, you can drink mineral waters, herb teas (but always in moderation since some of them in excess may not be good for you either), fresh fruit and vegetable juices, and coffee substitutes made from roots and grains.

No Backtracking

No Backtracking principles

This is a plan for life. You will carefully reintroduce certain carbohydrates into your diet — and find the balance that maintains your weight and keeps you feeling trim. This crucial phase will allow you to:

  • Establish the carbohydrate levels that you can eat in order to remain slim and supply your energy requirements
  • Break totally with bad habits made in the past
  • Never return to yo-yo dieting
  • Find a healthy attitude to food and a viable eating plan for the rest of your life.

No Backtracking rules

During this phase you need to:

  • Increase your daily carb intake by no more than 10g (1/3oz) each week
  • Add new foods one at a time
  • Eliminate a new food if it provokes weight gain; a return of physical symptoms lost during the Fast-Track Plan; increased appetite, cravings or water retention

Diet Start

  • Drop back to the next-lowest level of carbohydrate intake if you gain weight
  • Carry on eating adequate amounts of healthy fats and lean protein at every meal to ensure a balanced diet
  • Continue to take vitamin and mineral supplements regularly, drink masses of water and, of course, exercise regularly.

Make this diet the one that works

Once you have reached your target weight, you can start on the No Backtracking plan. Increase your intake of carbohydrates by 5-10 grams per day until you reach your optimum level for weight management This will probably be around 40 per cent of your total daily calorific intake, but remember that everybody differs, especially when you consider activity levels.

If you have high insulin resistance, then you may have to Keep on Tracking and be careful about how many carbohydrates you consume on a daily basis. But if you’re one of the lucky ones with low insulin resistance, you may be able to eat most vegetables (including starchy vegetables), fruit, pulses andwholegrains such as oats, barley, millet, wild rice, couscous and buckwheat. You can also begin to use recipes containing carbohydrate ingredients such as breadcrumbs; you may even be able to handle an occasional potato. But don’t eat all these things in one day. You still have to monitor your carbohydrate intake to stay where you are – healthy and energized. Remember the eating habits that got you here in the first place. You should have successfully gauged your ideal carbohydrate level, and be maintaining a stable weight and energy levels, within 4-12 weeks of following the No Backtracking plan.

Stick to the basic weight management tips and try to be good 80 per cent of the time. We are all allowed the odd slip up – if you want a slab of chocolate cake from time to time, make sure it is the best you find and enjoy it. If you ever see the scales creeping up, cut back, even go back to the Fast Track plan for a few days until your weight is back to normal, and then gradually raise your carbohydrate levels once again.

A template for life

Two portions of higher GI carbohydrates are included per day on the suggested eating plan. Treat this as the template you ought to follow from now on. And try some of these tricks to keep your carbohydrates at a moderate, healthy level:

  • Opt for rye bread, oatcakes and rye crackers instead of wheat-based bread. Even if you are not wheat-intolerant, it is worth considering this.
  • Eat fruit 20 minutes before eating anything else, not afterwards. Fruit takes less time to digest, but if eaten on top of a heavy meal, can cause bloating.
  • If you are going to drink alcohol, choose dry white wine or, even better, red, which contains flavonoids with antioxidant and anti-platelet properties thought to reduce deaths from coronary artery disease. If you have managed to kick the alcohol habit, opt for grape juice, which contains flavonoids similar to those in red wine.
  • Mix sweet potato with cauliflower as a mash or purée to go with roast chicken. The aim is to mix a high GI vegetable with a low one, to reduce the total carbohydrate level.
  • When making a rice dish such as risotto, reverse your ratio of vegetables to rice: add a little rice to a heap of vegetables. And try grating raw vegetables such as carrots and courgettes into the dish at the last moment – it adds texture and you get the benefit of all those raw phytonutrients.
  • Don’t give up on those whey-protein smoothies – they are still the most effective way of getting high-value biological protein.

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

After a look at the pictures in this charming crib Scandinavia, we can only guess at the last, this apartment has no space. You’ll probably be surprised to know that in reality, the total area of ​​the house has a room of 44 square meters. Located Vasastan, Stockholm, this bright and comfortable studio seems to have everything: a beautiful modern design, function and a general atmosphere of welcome.

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

According Alvhem Makleri & Interior, it is an opportunity that exudes peace and tranquility. The living room is a bright and social, with the opening of both kitchen and bedroom. Windows dissolves the border between the inside and provides natural light to govern. We are sure that you have already noticed alcove large enough for a king-size bed. This can be a bit flat, but the design approach used to improve inspires only the “oversized” ideas.

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT SCHEME

EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

  • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
  • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
  • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
  • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
  • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
the recording utility built into the NVIDIA Drivers
(Click to see Full Size)

Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

  • Uninstalling/Reinstalling GeForce Experience
  • Installing an older version of GeForce Experience
  • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
  • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

Exercise and Fall Prevention

As people get older one of the biggest threats to their health and independence are falls.  A brief review of the statistics on falls provides a sobering view of the threat.

 Falls are the #1 cause of death as a result of unintentional injury among people 75 and older and the #2 cause of death as a result of unintentional injury among people age 65 – 74.
Falls are the #1 cause of non-fatal unintentional injuries treated in hospital emergency rooms in every age group except ages 15 – 24.
Fall result in the second most expensive worker’s compensation claims with an average cost of $23,929.
One out of every three people older than 65 will fall this year.
50% of the people older than 65 who have fallen will fall again in the next 12 months.
Most falls are unreported (even serious falls) because senior fear losing their independence, and many seniors would rather die than lose their independence.
The treatment of osteoporosis with drugs is very ineffective at preventing fractures because it does nothing to prevent the primary cause of fractures which is falls.
Modifiable Risk Factors for Falls

Strength (in particular lower body and core strength)
Mobility (of ankle, knee and hip in particular)
Fear of falling from previous fall/s resulting in altered gate and restricted activity levels which further increases fall risk
Poor Balance which has three systems (visual, inner ear, proprioception)
Impaired Vision
Cognitive Status/Mood
Environmental Factors (slippery floors, rugs, poor lighting, etc.
Medication Side Effects
Exercise for Fall Prevention
Exercise can help address several fall risk factors including strength, mobility, balance along with improved cognitive status.
The most effective exercise boosts lower body and core strength while including a balance component that can be adjusted to each individual’s current capabilities.   This exercise should be weight bearing whenever possible and functional in nature.
reACT – Rapid Eccentric Anaerobic Core Trainer

One of the finest ways to address the exercise component of a fall prevention program is the use of the reACT Trainer.    The reACT Trainer provides a no impact training stimulus with a self-selected range of motion and allows for progressive balance challenge to fit just about any ability level.  
The reACT Trainer is a functional eccentric trainer meaning it provides eccentric dominant exercise that is highly functional in nature with strong emphasis on integrated functional movements in multiple planes of motion with the ability to adjust movement speed to increase or decrease the challenge level.   It is also a very safe training modality.
For more information on how the reACT Trainer can help prevent falls check out the following videos:
https://www.youtube.com/watch?v=IBjKkvuXrYE&t=213s

https://www.youtube.com/watch?v=WXljK8BbhLg&t=309s– instructional video

HOW TO DECORATE WITH NO MONEY

In the present times, the expenses are rising for everyone and this is the reason why budgets have become tighter. Having less or insufficient money, does not stop people from wanting things or wishing for them. The house is the place, where one spends the maximum amount of time and everyone wants that they house looks nice and attractive. There is a myth that if one wants to decorate or improve the house; they will need to spend a large amount of money.

HOW TO DECORATE WITH NO MONEYThis is not true as it is possible to decorate the house or a room without any money also. One needs to be attentive and use their creativity and in this way they can make the house look nicer.

One of the easiest ways to decorate a room or the house is to use everything that is already available in the house. One can use things which are packed off as of being of no use or one can use the things that are there in the room. Many times, just re arranging the furniture and the things in the house can create a new look altogether. Changing the color scheme of the room is also a good idea. One can use combinations of colors to create a new look. Throwing in new and vibrant colors in a room is also a good idea. New colors break the monotonous look of a room and help one change the way the room looks.

Another way to change the way a room looks is to add a painting or a wall hanging to the walls. This is a great way as it gives a new dimension to the room. A plain wall does not look nice and adding something to it can give a great look as well. One should always work on the larger area of the house and then move to the small ones. The house can be decorated with existing things in the house, and one can easily use these and decorate.For example you can use some oriental rugs from bedroom to put under the coffee table from living room. It is not always necessary to buy new things and decorate. Using the creativity one can create focal points in the house, and use this to create a new look in the house. When the focus of a room changes, it itself gives a new life and a new look to the room and this is one of the best and the most affordable ways to decorate the house without money.

Multi-Protocol Label Switching (MPLS)

Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

Internet 2010

When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

Combining Routing and Switching

Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

January 2011

Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

December 2010

It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

November 2010

The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

1923 Buick Roadster with a cool spare tire lock and tool kit

Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

  • capture points
  • shields
  • generators
  • spawn rooms
  • terminals
and more…
In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
[A separate tutorial for an Amp Station can be seen here:
http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
Enjoy and See You In the Game!

HOME DESIGN WITH STRONG VISUAL EFFECTS

Architects honey study apartment has a makeover that is quite original. The project is called “Santpere47” and has many interesting features. gold lines and circles to create a wall decoration that invites a lot of fun to watch.

HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

The ceiling is particularly exciting that the pattern is unusual and reminds one of the chambers of the royalties. Storage space is provided unconventional: not a library under the stairs and walls in some places where objects can be placed. The lighting in this apartment is also interesting to compare a second: the hanging lamps are subtle and elegant, and were impressed by the fire escape. The decorative elements are in perfect harmony with the general atmosphere of the house.

HOME DESIGN WITH STRONG VISUAL EFFECTS

HOME DESIGN WITH STRONG VISUAL EFFECTS

HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

[NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
(Click to see Full Size)

What is The Train?

‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

Killing the Boar champion while on the Train in Queensdale
(Click to see Full Size)

If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

[On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

Killing the Troll champion while on the Train in Queensdale
(Click to see Full Size)

How does one ‘get on’ The Train? 

First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
(Click to see Full Size)

The Route that The Train takes usually runs like this (repeatedly):

  • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
  • Kill the Boar champion in the hills there, NW of the Hunting Lodge
  • Fast Travel to the Vale Waypont and head into the caves just to the west
  • Kill the Troll champion inside the caves of Altar’s Windings
  • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
  • Kill the Rotting Ancient Oakheart champion at the forest’s edge
  • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
  • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
  • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

Killing the Oak champion while on the Train in Queensdale
(Click to see Full Size)

A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

Killing the Spider champion while on the Train in Queensdale
(Click to see Full Size)
That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

[UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
[UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
[UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
Boar-Troll-Bandit-Oak
I am working on a new, updated version of the map and will insert it here when finished.
For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

See You In The Game!

And More: Share and Tell – Imitating The GTAV Title Logo Style [Commentary]

I recently created a logo for The Blog, done in the style of the GTAV game logo (Grand Theft Auto Five Title Logo, seen Left). I had a lot of fun figuring out how to imitate the look of it and wanted to share a bit of how I did it, in case others want to give it a try too, or just to enjoy the ‘Behind The Scenes’ story of things… Originally I was creating this to be used on Headers for posts here at The Blog (since I was playing GTAV lately), but I also put it on a Wallpaper posted at The Blog’s Flickr page – but then decided that from now on, I will not put ‘my logo’ on Wallpapers that I want to share with everyone, I will just use whatever game logo the game is at the time, reserving ‘my logos’ mainly for use here [I was feeling bad for ‘forcing them onto others’ if I were to put them on Wallpaper for sharing with everyone…]

Just below this paragraph then, is The Blog logo, re-done in the style of the game logo from the game GTAV (Grand Theft Auto Five)… Created entirely in Corel’s Paint Shop Pro, I first had to find a font for the lettering. I found a few of them (Pricedown is one, GTArussian is another, the name of the last one escapes me at the moment). I typed out each word separately, so that I could place them really close together (like the GTAV logo has for its’ words), overlapping some of the ‘tails’ of the text (which was fine, for me). The “B” behind the ribbon was something else… Baskerville, that’s it.

My version of The Blog logo, done in the style of the GTAV game title logo
(Click to see Full Size)

The ribbon was its’ own element, blanked out (white with no text), placed on top of the “B”, which itself was made in layers of outlines and a Gradient, using the original game title logo (“GTAV”) as the source for the green shades (clicking with ‘the dropper’ on the far sides of the green area in the “V” in the GTAV logo). The spiral design was found online by an anonymous maker [let me know if it is you, I’ll give you Credit!], which I had to colourize and then placed in a way that was similar to the GTAV logo, on a layer below the text “B” vectors, so that it ‘shows through’ within the “B” area.

The text on the ribbon was made with a font that escapes me at the moment, but the colouring for it was hard to figure out, as it looks like it is directional (as though a light were casting highlights from one direction). I figured out to use the Bevel effect in the Layer Styles of Paint Shop Pro, to emulate a light source coming from the bottom-left, for the text ‘The Blog’. It turned out great for imitating the lighting on the text ‘Five’ in the GTAV game title logo ribbon! The hardest part was getting it to ‘curve’. I don’t know how to create a line and make the Text follow the line yet, so I simply used the Mesh Warp function, to ‘move it around’ manually and get it to seem at least a bit like it is curved.

A few layers of black and grey for ‘outlining’ the text and entire composition (made by ‘expanding’ the selected text and then Filling with Black or Grey, moving the white text in front of it each time) and it was complete…

I’ll mainly be using it in Headers and Screenshots in posts almost exclusively here, at The Blog. I just thought that some might like to hear a bit of ‘Behind The Scenes’ or ‘Commentary’ about it – hey, there are a lot of people that (like me) watch Commentaries! Haha

I hope you enjoyed my little Share and Tell – and if you play GTA Online – See You In The Game!

Original GTAV game logo design by Rockstar, Take-Two Interactive

[Personal Note/Declaration: I am not associated with, nor do I receive anything in any manner or form, for mentioning Corel or Paint Shop Pro. I am merely an enthusiastic user of the program (I have played with it off and on since it was owned by JASC). For fairness and completivity, I shall mention another great graphic editing program, The Gimp (now just called GIMP?) – which is Open Source and entirely Free – all of the steps above can also be performed with this free program]

9 Benefits of Orange Jasmine for Health and Beauty

9 BENEFITS OF ORANGE JASMINE FOR HEALTH AND BEAUTY

9 Benefitsof Orange Jasminefor Health and BeautyOrange jasmine (Murraya paniculata L.) usually grows wild on the edge of the forest, in the undergrowth, and guardrail garden and planted as an ornamental plant in the yard. Such as ylang and jasmine flowers, yellow flowers are also often used for traditional medicine. Parts of plants that can be used is the leaves, twigs and roots. Skins and stems are also useful for medicine.
Leaves and twigs are useful in overcoming inflammation of the testicles (orchitis), could also overcome inflammation of the airways (bronchitis), urinary tract infections, gonorrhea, vaginal discharge, and come irregular menstruation, body fat overload, and slimming the body, pain ulcer (ulcer), dental pain and soften the skin.
9 Benefits of Orange Jasmine for Health and Beauty - 1
Its roots are also useful for treating bruises caused by collision or hit, rheumatic pain, sprains and insect bites and poisonous snakes, boils, eczema and scabies. While the bark is also useful to overcome tooth pain, pain due to open sores in the skin or mucous membranes (ulcers).
1. Can Smooth Skin
Yellow leaves are still fresh as much as 30 g washed and then pounded until creamed. Add 1 cup of water was while in the mix with the average. The material is then scrub the skin before bedtime.
2. Can Smooth Menstruation
Yellow leaves and leaves of henna (Lawsonia inermis) each fresh ingredients as many handheld ½, 1 finger rhizome of ginger leaves, washed and cut into pieces as needed. Add 3 cups water was then boiled until the remaining 1 cup water. After the cold filtered water, then drink 2 times a day, each ½ cup.
3. Treating Urinary Tract Infections
Yellow leaves are still fresh as much as 35 g washed and then add 3 cups water. Boil until the water remaining half. After all cold filtered and taken 3 times a day, each is ½ cup.
4. Inflammation of the Testicles
Provide 9 sheets of yellow leaves are still fresh as much as 60 g and bitter herbs as much as 35 g washed and then boiled in 3 cups water until the remaining 1 cup water. Once everything is cold filtered, then taken 2 times a day, each ½ cup. Do it every day until cured.
9 Benefits of Orange Jasmine for Health and Beauty - 2
5. Can Slimming Body
Yellow leaves are still fresh and the leaves of noni (Morinda citrifolia) each and a total of a handful of Intersection dribbles too much as half a little finger until finely ground. Add 1 cup cooking water, stirring until evenly distributed. Wring with a piece of cloth. Water that is collected while drunk in the morning before eating.
6. Can Treat Toothache
Oil that comes out of the bark of yellow flowers are already burned dripped on the hollow.
7. Can Treat Arthritic Joints
Orange Jasmine root and root (Lantana camara) washed, then add 3 pairs of chicken legs. And all the ingredients are cut into pieces as needed and then add enough water to be submerged. All the ingredients are then cooked. Once cooked and the water is drunk warm.
8. Can Heal Bruises
Orange Jasmine and glass plate, respectively, and the fresh leaves, the same lots, washed and then finely ground. Add some wine while stirring on a fire. Then Warm taped at the bruised body.
9. Can Treat Boils
Dried yellow root that is as much as 30 g washed and cut into pieces as needed. Boil 3 cups of water until the water boiled only the remaining l glasses. Once cool then filtered then drink. In day 2 times, each ½ cup.

Okay, that was it some yellow flowers benefits as a traditional medicine to cure various diseases. Hopefully article 9 Benefits of Orange Jasminefor Health and Beautycan we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

Knoxville News Sentinel featuring Kurt and April Nitzsche

Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
You can view the online article here. 

Eat more and more, do you know chemicals in foods blow you appetite?

In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

Diet Start

Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

Georgia Bloggers Blog Hop

It’s time to teach the country about yes ma’am and ya’ll.
Down here in Georgia, we talk with a drawl.
We’re bringing you some freebies as sweet as our tea.
Enter our contest, you might get some things free!


I moved to the Atlanta area eight years ago when my husband decided to go to law school at Emory. It didn’t take long for us to decide that we’d say goodbye to the cold Michigan winters and make Georgia our permanent home. 


We eventually settled in Decatur, a quaint suburb of Atlanta, and we love our little town. Decatur has more festivals than any town I know, and we have a thriving downtown with local shops, concerts, and amazing restaurants. We’re minutes from downtown Atlanta, but we’ve somehow captured a small town feel, and I love it. 

Image of Concerts on the Square in Decatur via visitdecaturga.wordpress.com

This weekend, we’ve paused from our peach picking to give you a taste of Georgia. Twenty-five teachers invite you to take a road trip through our southern state. Hop through our blogs to get freebies.
                                          
This weekend only, I’m giving away my Standards for Mathematical Practice posters from TpT for FREE! You can pick up mine just by clicking here. 



My entire TpT store will also be 20% off this weekend only — June 20-22, so check it out! 

We’d also like to give you a chance to win a bushel basket full of our products. To enter from my page, you just need to follow my blog on Bloglovin’. Already do that? I’d also love for you to follow by email in the link at the top! You can enter once from each person’s blog.

a Rafflecopter giveaway

a Rafflecopter giveaway

So what are you waiting for?! Time’s a wastin’. Go get more free stuff and sign up to win!

An InLinkz Link-up

My Trip to New Delhi & Hyderabad Cont…….

Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

Why Teachers Love Technology

An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

What do we Know Infographic
Graphic from OnlineUniversities.com

Do you love technology? I’d love to hear why in the comments section!

Tune Into Technology Linky: Integrating Technology into Reading

I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

1. Let kids annotate their reading with GoodReader.



I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

2. Share favorite books on KidBlog.

My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

3. Create Book Trailers in iMovie.

Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

4. Create book clubs and discussion groups on Edmodo.

We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

5. Use Evernote and GoodReader to assess reading.



I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

Fabulous Fiber!

Everyone has heard that they need to eat fiber, but few people really know what it is and why it is so important.     Fiber is a form of carbohydrate along with sugars and starches.      Unlike sugars and starch fiber cannot be used for energy because it cannot be broken down into sugar.     Starch and sugars both end us as blood sugar aka glucose.
Starches are simply multiple units of sugar hooked together, and we have enzymes that break them apart so we can use the sugar for fuel.   Fiber is also multiple units of sugar hooked together, but humans lack the enzymes necessary to break it down into sugars so it is not absorbed.    This is very important when thinking about carbohydrate containing foods because they are NOT all the same.
For example, a glass of fruit juice is essentially a glass of sugar water with some beneficial plant chemicals and in many cases a nice dose of vitamin C.    It can dramatically boost blood sugar, and if you consume too much it can definitely drive weight gain.     While a large serving of brocolli is mostly fiber with little sugar and starch and is also chock full of beneficial plant chemicals, but with almost no effect on blood sugar!
There are two main types of fiber – soluble and insoluble.    Ideally you want to eat both.   There is also a third type of fiber called “Digestive Resistant Starch” (see https://workoutanytime.blogspot.com/2017/10/digestion-resistant-starch-all-starch.html)
Soluble fiber, found in foods such as cucumbers, blueberries, and beans, has a gel-like consistency and slows down your digestion.     This helps with satiety (feeling satisfied).    It also slows the break down and absorption of cholesterol and other nutrients like starches and sugar which can help lower cholesterol and control blood sugar.    Some foods with soluble fiber also help feed the good bacteria in your digestive tract.
Insoluble fiberis found in foods like green, leafy veggies, green beans, and celery.    It does not dissolve to a gel and stays intact as it moves through your colon.   By adding bulk, it helps food move more quickly through your digestive tract reducing transit time.  Insoluble Fiber is sometimes referred to as “roughage”, and it along with soluble fiber can help with constipation.
Benefits of High Fiber Intake
Fiber intake is very important for keeping blood sugar levels under control, and studies have shown that people who take in at least 26 grams of fiber per day had a much lower risk of developing Type 2 Diabetes.
There is also an inverse relationship between fiber intake and heart attack, with research showing that people eating a high fiber diet have a 40 percent lower risk of heart disease.    High fiber diets may also help lower blood pressure.
Another interesting research finding about fiber is that for every 7 grams of fiber you consume each day your stroke risk is decreased 7 percent.      To put this into perspective this equates to about 2 servings of fruits and vegetables.
Fiber, and psyllium in particular, can help move yeasts and fungus out of your digestive system which may help prevent them from triggering acne and rashes.
Fiber can also provide relief from irritable bowel syndrome in many people.
Fiber intake may also help reduce the risk of gallstones and kidney stones probably through its action in controlling blood sugar.
Sources of Fiber
Contrary to popular opinion grains are probably not your best source of fiber.    Unfortunately, non-organic grains are chock full of glyphosate which is pesticide banned in most other countries outside the US because they have no allegiance to Monsanto who produces it.    
A high grain diet promotes insulin and leptin resistance thereby increasing your risk for Type 2 Diabetes, Heart Disease and Cancer. 
Better choices of fiber includes Organic Whole Husk Psyllium.     If you use this supplement it is critical to get organic psyllium as non-organic psyllium is heavily sprayed with chemicals.     Other great sources include chia seeds, berries, root vegetables such as sweet potato, peas and beans, mushrooms, broccoli, cauliflower, Brussel sprouts and celery.
How much fiber?
Experts recommend that woman eat a minimum of 25 grams of fiber per day and men consume 38 grams per day.     However higher intakes may be more beneficial.     
It is important to SLOWLY increase your fiber intake and keep your water intake high to prevent potential issues caused by eating fiber without sufficient fluid.
Low-Fiber Diet
There are circumstances where high fiber intake is contraindicated and timing for fiber intake relative to drugs and supplements is important.   People with chronic digestive issues may need to remove fiber for some period of time because fiber feeds the bacteria in your gut.    Although as a general rule this is highly beneficial there are circumstances where high fiber intake can feed the wrong microorganisms such as pathogenic bacteria.

Fiber can also bind certain medications and minerals dramatically reducing their absorption so many drugs and mineral supplements should not be taken at the same time as fiber.

Workout Anytime in Citizen Tribune

Workout Anytime in Citizen Tribune

WORKOUT ANYTIME was recently featured in the Citizen Tribune. The article explains the newest WORKOUT ANYTIME location coming to Morristown, Tennessee this October. It gives background on Steve James and Scott Elliot and how they came about the WORKOUT ANYTIME brand. The article also goes into further detail on the services at the gym and the owners planned community outreach.
You can view the full article here. 

BEAUTIFUL HOME FAMILY DESIGN “VILLA DE CHARME”

Katrine Martensen-Larsen comes this stunning house designed for a family of seven children. We hope that this message will come in handy for those of you looking for new ideas for the nursery too. “Villa de Charme” is located in, Frederiksber Denmark and has been specially designed for a family of seven children. The designer said that this house is “evidence that many children and a hectic lifestyle does not mean you have to compromise on style.” The interior features original decorating ideas and news. The wallpapers are particularly interesting. White is used mainly to define the house and gives it an intimate feeling clean and fresh. bits of color are added here and there, crying the whole design. We really appreciate how serious, sober rooms alternate with play.

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

Workout Anytime on FOX 19

Workout Anytime on FOX 19

Tony Petrocelli from Workout Anytime was recently featured on a segment on FOX 19 in Cincinnati. The segment is about what women do wrong while working out. Tony then talks about the locations and mentions that there are franchise opportunities.

Cincinnati News, FOX19-WXIX TV

You can view the full segment here.

Proven Ways to Avoid Holiday Weight Gain

As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
Here are some key tips:
Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

Math Resources for Teachers

It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

(Apologies in advance — this will be a long post!)

Book Resources

A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

Math Matters: Understanding the Math You Teach Grades K-8

I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

Good Questions for Math Teaching



This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

Number Talks

I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

Good Questions: Great Ways to Differentiate Mathematics Instruction



I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

Online Resources

Visible Thinking Routines

I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
Math Class Needs a Makeover

We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

Have a great weekend! I’ll be back to blogging more regularly next week!



Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

July Currently

How did it get to be July already?!?!

I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

Have a great weekend!

My Next Assignments…………

Never have I experienced a hectic period leading up to an assignment like the past few days. I returned from my assignment in Vietnam on the 3rd of February. I was supposed to leave for Indonesia on the 8th for another assignment. However the client was not able to process my visa on time and the assignment was cancelled / postponed. During this period I had to finish 6 Organizational Capacity Assessment Reports. So I was running around trying to process my visa as well as trying to complete the reports before I left for Indonesia.

Once it was clear that I was unable to go to Indonesia I was requested by 3 more clients to submit proposals. One assignment was in Bangladesh and it went very fast; I have already set the travel dates, booked the tickets, got my visa and everything is a go. The other in India went very quick even though I had to finish contracting, setting the travel dates, booking the ticket, and getting my visa to be able to start the assignment in India on the 21st.

The other is indeed a nightmare! I have been discussing with this client since October of 2009. Well believe it; some times a contract can take even longer. I have already done 5 versions of the proposal; and the last. This kind of procrastination by a client signifies all or some of the following:

  • The client is not clear about what they want
  • They are haggling about rates and costs
  • The client is unsure about you and the organization you represent
  • Does not know / have the resources / decision making power to use the results of the assignment

I must say that this client does not know me and the organization. That is why I went through the process of doing 5 versions of the proposal. However now I know it is to do with the rates and costs. This has a critical issue that most consultants do not see; which is the client is likely to not be satisfied with your work no matter how well you do your assignment. This also has the possibility to creating a problem when collecting final payment for the assignment.

My advice (which is what I am doing right now) is to stop doing anymore changes to the proposal and wait for the client to come back to you with a contract with any changes that they feel are important. This way you push the client towards closing (sales cycle) and stop you from spending time (which is money) on an order which may not be profitable.

And More: “An Internal Error Occurred When Overlapped Buffer Is Full” in VideoStudio X10 [Error Workaround]

[This post is currently Text-Only for speed of Posting. I may return and add example Screenshots and more, Soon™]


Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue

Go to “Update 2017-05-02


Just a quick bit of information, for those using Corel’s VideoStudio X10 to edit and render their video projects and running into this error…

I was working on trying to finish some of the many, many, many projects I have in various stages of completion, and ran into an odd error when trying to render a Project in VideoStudio X10. The error said only:


“An Internal Error Occurred When Overlapped Buffer Is Full”


This is somewhat odd, as this is more of a generic Windows Application error than it is a VS (VideoStudio) error. So, I went to the Official Corel Support Forums and did other online searching…






I found a lot of people who have experienced this error, but none that had any solutions, sadly.
So, it was Time To Go Troubleshooting! /maskandcape

Now initially, I was trying to render in 1080p using the more common MPEG-4 Part 10 (h.264/AVC) format. VSx10 offers GPU-acceleration (where it utilizes the power of the videocard), like many video editing programs do these days, to help render and compress the output – and the quality of MPEG-4 can be quite good for the size, when it comes to compression.

BOOM, the error pops up, interrupting the rendering process.
Okay, time to see what could be causing it.

First, I tried to render in the other Formats that VSx10 offered (MPEG2, WMV, etc) and nothing would finish rendering without this error – except for Windows Media Video format (WMV).

Since WMV does not require GPU-acceleration to render, I disabled all GPU-powered optimization in the Preferences of the application (disabling ‘hardware acceleration’ where I could). I was hoping this would render with other formats without acceleration (MPEG-4 does not ‘require’ hardware acceleration, for example, but it renders much faster with it). Still, the error came up in any other format than WMV…

So, to dig in a bit of a different hole than the WMV format to find answers, I took out all elements of the Project except for the first video files (taking out the audio files, the Text added, images, etc) and tried to render again. It worked!

I then added in the Text elements (made with Corel’s built-in Title tools). It worked!

Since it worked with Text and all video files now, I added in the Audio Files.

BOOM, the error popped up again.
That’s okay, it’s progress – now we know that something related to the Audio is having troubles.

I was looking at the Audio Files and noticed that I had some ‘Audio Filters’ and ‘Speed/Time-Lapse’ adjustments on them (to help them synchronize somewhat in the Project), so I took those effects out and tried to render again. It worked!

Okay, so since it works with the Audio Files present – without ‘FX’ on them – then it might have something to do with the Filtering/effects…
I enabled only the Speed/Time-Lapse adjustments and left out the Audio Filters for the Audio Files that utilized them. It worked!
I then enabled the Audio Filters again and BOOM, the error reared up and roared in my face.

So, it appears that there may be something with the Audio Filters in VideoStudio that does not play nicely when you go to render the Project (for those experiencing this problem..). Nothing but WMV would produce output for me, at the time of this posting (this is with VideoStudio X10 Service Pack 1).


My advice then, is to try to utilize audio files that do not require Audio Filters in VSx10, for now (until the source of this problem is fixed in full).


If you must apply some sort of affects or filtering, there are many audio editing tools out there that can be used, at least until this gets looked at/fixed someday. Some suggestions off the top of my head are:

  • Sony’s Sound Forge (recently acquired by MAGIX, I think).
    This is a pretty capable application, with lots of effects, pitch shifting, fading and filtering available – I have used it a lot in the past when it was run by Sony. It costs some money, however.
  • Audacity.
    This is a free (Open Source) audio editing application that is popular and has many of the features and filters that Sound Forge has – I have used this too, before I could afford to buy any editors at all.
  • Adobe Audition.
    Adobe acquired the older-but-popular Cool Edit Pro audio editing program, which I personally used to use and like. I have not used it since Adobe took over, so I cannot vouch for how this one is – I assume that it is similar to how CEP was – which was quite capable. It is not free, however.


For now then, I will bring this up with Corel Support and see what they have to say about it – until this gets ‘fixed’, avoid utilizing Audio Filters in VideoStudio, if you can – for now…


Hopefully this information will be of use to those who, like me, were running into this annoying error in an otherwise decent video editing application – and hopefully it gets fixed soon!


If I remember, I will come back and Update this Post when a ‘Fix’ has been released!



Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue with Corel’s VideoStudio x10 and how it handles some Audio formats (sample rate / bit depth). I am in contact with Corel Support at this time via e-mail, discussing this issue.




Here is what I have found after further testing:


I did some further testing on the audio files, looking at their specific properties. 
I found that the files giving this error were in 24bit depth, 96000Hz format. 

Just to experiment/investigate, I converted the audio file to 16bit depth, 44000Hz format (Standard Compact Disc Audio WAVeform format) and it worked! 

Here is what I found then, during more testing on the bit depth:

– 16bit audio file = Audio Filters and Speed Adjustment can both be used at the same time
– 24bit audio file = Only one or the other can be used at a time

Both Audio Filter and Speed Adjustment added = Error with 24bit audio file at 96000Hz sample rate
(I found that the 24bit depth audio files were also 96000Hz..)

Testing 24bit audio files at 44000Hz resulted in NO ERROR = it worked
(when using both an Audio Filter and a Speed Adjustment at the same time)

The error was repeatable however, with a 96kHz 24bit audio source file (having both a ‘trouble’ Audio Filter (one of those three listed above) and a Speed Adjustment on it).

Although this is not a ‘game breaking’ issue (I personally don’t mind converting any of my 24bit audio source files that are at 96kHz into 16bit depth versions but it is more work), this may be an issue for more novice users, who may not know how to do so. 
[Hmm, maybe I will make a Quick Tip on this, to help those people out…]

Related to this, many commercially available Samples (sound source files) are distributed to the customer as 24bit audio files, for higher fidelity. 
(Example: I purchased Sample Packs from Sony Creative Software and they came in a bundle as 24bit audio files. Another purchased Pack from BigFishAudio also had the source files being delivered as 24bit sources)
If any of those are at 96kHz (I see that most are at 44kHz anyway…), then it may bring up this issue. 

I realize too that it may be my machine, or my specific combination of hardware, interacting (CPU/Sound/etc) and also there does not seem to be many 96kHz 24bit audio files floating around in general usage (from what little I have seen, perhaps there are, but as I stated above, commercially-purchased packs seem to come in 44kHz 24bit format, at most).

Although this is not a ‘Fix’ directly dear readers, hopefully this information can help you VideoStudio users to avoid it, ‘stepping around it’ at least, for now – and perhaps this testing and information can even be utilized improve VideoStudio for the future… (I am in contact with their Support now, discussing these occurrences).






[Note: I am not affiliated with Corel or any of the other companies mentioned herein. I have not and I will not receive any compensation of any kind, for mentioning VideoStudio here. I am merely a user of the product and have used many of the other products mentioned above, including other video editing programs, not omitting Open Source / Free applications. I simply share information I have discovered, in hopes that it will help others.]

Globesity continue…

WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

  • They had an active lifestyle
  • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
  • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
  • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

Warning signs from the present day

Diet Start

  • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

  • In 2002 the National Audit Office in the UK revealed the following facts:

58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

  • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

And More: Deals and Sales – End Of The Month Specials (February)

The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

Sniper Elite Nazi Zombie Army Sale Page
Sniper Elite Nazi Zombie Army 2 Sale Page

also on sale
Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
Alternativa is on sale for only $1.29 (90% off)
The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
Moto GP 13 is $12.00 (70% off)

Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

(click image to see Full Size)

also on sale
Bioshock is $4.99 (75% off)
Bioshock 2 is $4.99 (75% off)
Bioshock Infinite is $9.99 (67% off)
Borderlands, Game Of The Year Edition is $7.49 (75% off)
Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
Duke Nukem Forever is $4.99 (75% off)
Civilization V is $7.49 (75% off)

GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

(click image to see Full Size)

also on sale
Call of Juarez: Gunslinger is $9.72 (46% off)
with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
Sniper Elite V2 is on sale for $7.50 (75% off) or get the
Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
and last but certainly not least
The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

HOW TO DECORATE A KITCHEN MINIMALIST

A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

Hello, 2015!

Another year is in the books, and as always, I’m excited to be seeing the start of a new year. Last year will be remembered for its big highs and deep lows, but I know that everything happens for a reason, and I feel like I’m in a good place to start 2015.

And one place I plan to start is being a better blogger! So here’s my Currently post for January 2015.

Listening – It’s my daughter’s bedtime here, and my husband has bedtime duty tonight. It’s a rare moment when the TV is off, the dogs are asleep, and all is quiet in the house. I’m savoring it.

Loving – I think that New Year’s Day may be my favorite day of the year because it is a fresh start where it feels like anything is possible. I often feel this way at the beginning of the school year, too, but I think I prefer this time of year because there’s more predictability with everything. I already know my students very well; we’ve built our routines and expectations, and the only things that need to be changed are the things I *want* to change. It’s an empowering holiday.

Thinking – A major reason why I haven’t been blogging much lately is because of my Ph.D. program. It feels weird to be writing something that doesn’t have a lengthy bibliography attached to it! I continue to be excited about my dissertation topic, though, and I’ve been thinking about it more and more. I plan to write about the role of social media in teacher professional learning. The short version is that I’m going to study how reading and writing about classroom practices through blogging affects teachers’ feelings of effectiveness in the classroom (self-efficacy beliefs). I think connecting with other teachers through blogging and other social media has been one of the best moves I’ve ever made as a teacher, and I’m curious to find out if others feel the same way and what consequences it might have. One of my classes this semester is actually requiring me to blog about my research, so I’ll be setting that up in the next week. It will be a separate blog as I doubt my classmates in other programs will really want to read about Eberopolis, but I’ll share a link here if you’re interested in following or learning more.

Wanting – I had 18 blog posts in 2014. Pathetic. I have a notebook full of ideas, so now I need to get them out here. My goal is to blog at least once a week, and as I’ve been getting other things in my life better organized, I think that’s realistic.

Needing – I set some big goals for this vacation as far as getting myself organized for the new year, and so far, I’ve done a great job. For example, I already have 2 months of healthy meals planned for my family (written on sticky notes so I can shuffle them around when stuff inevitably comes up).

And I’ve been cleaning closets and creating a new workspace to boost my productivity in the new year. I even made my annual pilgrimage to The Container Store today! I just need to wrap up my remaining projects tomorrow so I can enjoy my weekend before returning to school on Monday. (I’m @eberopolis on Instagram if you want to see more about those projects…). 
Finally, my three areas:
YES to my health. I lost nearly 20 pounds between Labor Day and Christmas, and while my trip to see my family for the holidays reversed that trend a little, I’d like to continue to focus on my health in 2015. I’ve been doing Weight Watchers, and losing weight has been easy when I’ve taken the time to plan what I’m going to eat and track what I eat throughout the day. I’m ready to get back on track.
Maybe to becoming a morning person. I already get to work by 7:15 each morning, but I would hardly call myself a morning person. I read The Miracle Morning by Hal Elrod over break, and it has me thinking about whether I should try to get up earlier to add things like meditation and exercise to my morning routines. I’m thinking I’ll try it for a month and see how it goes. (The book was good, btw. An easy read to be sure). 
I wish…I love my job–I really do–but I’m starting to feel like it’s time for me to tackle a new challenge. I want to be able to work with other teachers to help them troubleshoot issues in their classrooms, improve their teaching, and use technology more effectively. I purposefully chose to go into an Educational Leadership PhD program for that reason; ultimately I want to teach in higher ed and/or become an administrator. I’m not ready to do all of that yet, but I wish that I could find an instructional coaching position or something similar that would let me work more directly with teachers while I keep working on my program. It might be time to start that hunt this year. 
Okay, I promise I will be back soon…I have a couple of other posts in draft mode almost ready to share about some of the new things I’ve been doing in my classroom this year. Hopefully you’ll FLIP when you read them! 😉
Happy new year!

HOME DECORATING WITH ASIAN STYLE

Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

The “Welcome” Section of VideoStudio
(Click to see Full Size)

Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

The Corel VideoStudio X10 Preferences Window
showing the Default Startup Area/Section which is shown when the program starts
(Click to see Full Size)

A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

Example of Corel VideoStudio x10 Starting Up In The EDIT Section
(Click to see Full Size)

Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


[VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

~Troy from The Game Tips And More Blog


[I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

Choosing a Sensible Diet, Healthy Appetite

So you like to eat! That’s normal. A healthy appetite is one of the greatest assets in life. The whole body seems to respond to the sight, smell, and taste of a well-prepared meal. Every organ responds to the occasion. The glands work more vigorously, the digestive organs operate more efficiently, and the nervous tensions relax. That is why eating is such a pleasure, especially when you are healthy.

Many people, however, are neither sick nor well. They are somewhere in between. They drag themselves around, feeling half dead much of the time. Yet, they are not sick enough to go to bed. What is the cause of their trouble? Many times it is due to a faulty diet. Some victims of nervous conditions could be completely cured if they would only learn to eat properly. The same is true of many others who suffer from digestive complaints. They could all find relief from their miseries by choosing better meals.

So much depends on the right choice of food. This human body in which we live is a superb machine. It is capable of operating smoothly for seventy or eighty years, provided that we treat it well. But if we fail to supply it with the materials it needs, the results may be well-nigh disastrous.

Every time we open our mouths to eat we make an important decision concerning our future.

Good health always begins in the garden. A well-balanced diet naturally includes plenty of wholesome fruits and vegetables.

Diet Start

What we choose to eat will either help to keep us strong and healthy or it will leave us weakened and less prepared to meet the stress and strain of living. The kind of health and the length of life we enjoy probably depend more on the type and quality of foods we choose than on any other factor. The choice is up to us.

It was the Creator’s plan that the foods we eat should keep us young and healthy. Many bring on premature old age by wrong eating habits.

Unfortunately, a great many people never give much thought to their diet. They will eat anything they can get their hands on or that may appeal to their perverted appetites. In their minds one thing is as good as another—or as bad. They will eat at any odd time whether they are hungry or not. No wonder they are sick! The human digestive system was never intended to sustain this kind of abuse.

Don’t Be a Faddist

On the other hand, there are some who react quite differently. They take great pains regarding what they eat. They are so careful to avoid anything that they suspect might cause them trouble. They are so particular in everything they do. Every now and then they go on some newfangled diet in the hope of winning back their lost energies. This means that they often deprive themselves of the very things they so much need. Such people are slowly starving themselves in the midst of plenty.

In most cases there was nothing radically wrong with such people. They simply didn’t know how to feed themselves in a proper manner. They were not intelligent on some of these most vital issues of life.

It should seem perfectly obvious to everyone that our bodies are built up entirely from the things we eat. We have no other way of getting these important substances into the system. Yet how few of us really think very much about this. To keep well we must develop different tastes. Our appetites need to be educated. For instance, we must realize that we cannot continue to eat devitalized foods without paying for our folly.

Foods that are highly flavored with sugar and condiments are usually devoid of some of the most important elements needed by the body. The seasonings often cover up the natural flavor to satisfy an abnormal appetite. But such foods may be completely lacking in the vital elements necessary to maintain a person in good health.

Rules for Choosing a Sensible Diet

Choosing a sensible diet is not so difficult. There are a few simple rules that anyone can follow. First of all, it is important to have plenty of variety in your diet. Don’t be satisfied with the same old humdrum meals. Look around for something new and different—avoid monotony. Find new ways of preparing food. It is a fact that the more variety you have, the less you are likely to suffer from some dietary deficiency.

The second rule is to learn something about the different materials your body needs. For instance, if you are going to build a house, you will have to buy certain supplies, such as timber, glass, bricks, plaster, nails, paint, and many more. In the same way the human body needs different building materials for the important job it has to do. These things are essential at every age of life, but more particularly during those rapidly growing years of childhood and youth. They are also necessary when one is recovering from some serious illness or injury, or during pregnancy and lactation.

What are these different materials? Doctors refer to them as proteins, fats, carbohydrates, amino acids, vitamins, minerals, and water. These are the materials of which the body is composed. They are present in our foods. When these various substances are absorbed into the blood stream, they are usually stored in the liver and other organs until they are needed. With the exception of water, each must undergo certain changes before being used in the human system. Myriads of chemical reactions are taking place within your own body at this very minute. This is what keeps you healthy and strong, so that all your organs will be working at full capacity.

From our foods we get the materials out of which the bones, muscles, nerves, skin, and all the internal organs are formed. From our food we also derive the energy we need in carrying on all the activities of life. In addition, we must have other important chemicals that are needed to regulate the activities of every organ in the body. Unless these materials are present in our daily diet, we are likely to suffer from some deficiency. Sooner or later we will find ourselves in real trouble.

The average diet of many families today is lacking in certain of these nutrients. Sometimes the trouble is due to insufficient protein. At other times it may be a loss of vitamins or minerals, which may have occurred during the preparation of the food. Some people try to make up for a deficient diet by taking extra vitamins in the form of pills. These may help, but they will never take the place of good food in supplying the needs of the body. There is always danger in trying to follow some haphazard, unbalanced diet. Only a sensible way of living will enable us to enjoy a full and satisfying life, free from diseases that could have been avoided.

Fallout 4 – V.A.N.S… What Does It Do? Why Would Anyone Want To Take/Use It? [Explanation with Example]

I saw someone ask this in the Official Steam Forum, wondering why someone would even pick the VANS Perk (the Skill to use it) while levelling. I wanted to come back here and post, as a Quick Tip perhaps, a short explanation on what V.A.N.S. actually does (and how it can be helpful to players).

Briefly summarized, V.A.N.S. is a Perk of Intelligence (requiring only 1 INT to Unlock) that lets the V.A.T.S. interface ‘show you the way’ to your marked objective/quest/mission location. An example I recorded of how it looks, is below:

Recorded aboard The Prydwen, this is a short example of how VANS looks in Fallout 4.
(Reduced size, framerate and quality, to fit Upload requirements at Steam)
Click to see slightly larger Full Size
On Steam, at http://steamcommunity.com/sharedfiles/filedetails/?id=966498722

To use V.A.N.S., simply hold the Hotkey for opening VATS for a short time (eg. on PC, instead of hitting ‘Q’ quickly once, to enter V.A.T.S., hold it down) – let go of the ‘Q’ key, after about two full seconds or so – even if the Pip-Boy has not fully opened yet. Then hit ‘TAB’ to close the Pip-Boy right away, once the ‘green trail’ is seen.
You do not need to move or turn at all, until after closing the Pip-Boy fully (for example, I do not use the mouse at all to use V.A.N.S., on PC, I just open the Pip-Boy with ‘Q’ and close the Pip-Boy with ‘TAB’).
[Perhaps this will help those having issues with opening/closing/viewing the ‘trail’…]

If you’ve played Skyrim, it is similar to the Clairvoyance Spell in that game, as it will then illuminate a ‘trail’ that looks like a tube of smoke along the ground, that you can follow (but in Fallout 4 it is ‘Pip-Boy Green’, as opposed to ‘SKYrim Blue’).

While this doesn’t seem needed as Fallout 4 has both Map Marks (on the Map in the Pip-Boy and at the bottom of the Screen in a Compass) and Floating Markers (that can be seen on Doors, above NPCs, etc). V.A.N.S. is helpful in a slightly different way. It shows you the ‘Main Path to take’ to get to your Marked Objective/Quest/Mission (as in, “go to this Street and use this Road”).

For example, if you are jumping around in the back hills or lost in the skyscrapers of Downtown, it will guide you out of where you are with the ‘green steam trail’ and show you how to get back to the main roads, then it will illuminate which way to go from there, too.

The Map Markers that are normally available only show the ‘overall’ or ‘general’ Heading, like a Compass (N, E, W, S) and not ‘how to go around this thing in front of you’ or ‘how to get back to the main road first’. Those last concepts are where the usefulness in V.A.N.S. shines; in how it can guide you from exactly where you are, first around whatever is in front of you (to the nearest main path), then how to go on from there to your next objective.

Try it out on your next Character perhaps – and have fun in Fallout 4!

Battlefield 1 – DirectX Error “GetDeviceRemovedReason” [Workaround]

At first, because of the phrasing of the error, I thought it might be Hardware, namely my GPU (Graphics Processing Unit, the Videocard); but since that was working fine with literally, all other games – playing in longer gaming sessions even [and I know for sure that I wasn’t actually physically pulling out my videocard while playing …I think] – I omitted that possibility (for now) and focused on a potential Software approach, which meant checking configuration…

Looking at the Settings for the game then, I tried reducing everything down to the Lowest Possible Settings; to reduce the load on the GPU and the load in the processing of the game itself. (With lowered settings, there would be less data being streamed from the game, less being extracted from the compressed/encrypted files of the game, less being calculated and drawn, less everything). If there was a problem with how game data was being handled, this might being it to light [note: an issue with integrity of the files would not be detected this way, this is more of a data handling troubleshooting step; integrity of the game files can usually be checked/verified with a Repair/Verify through the game client or if that doesn’t help, a Reinstall of the game usually assures accurate game files (barring Drive/RAM file handling (Hardware) issues – which is another tangent/issue altogether, heh) – screenshot of where to run a Repair/Verify of the game files for BF1, below].

Example of the Location of where to Repair the game files in the Origin Game Client, showing Battlefield 1 in 2017
(Click to see Full Size)

Nope. Crash. Error [which I lost the clean Screenshot of, of course – but a version of it is in the Header for this posting – I will add a clear Screenshot of the error window to this post when I can capture it again, if it occurs]. Hmmm…. Since it was a DirectX error (and I am 93.33-repeating-percent-sure that I did not “remove the video card” while playing..), I tried one last thing. Instead of swapping out the GPU to try with something else (a GPU from a friend’s PC, for example), which is approaching a Hardware type issue; I tried something else: I changed the DirectX level in the game from DirectX 12 to DirectX11 [this may not have been solely ‘my idea’ – although I am sure I would have eventually arrived at it as a troubleshooting step, I looked up this error and found many, many locations and sources of others stating they have this issue and encountered this error and I may have read it somewhere, for it to have come up – merely mentioning because I just don’t want to take sole credit for something I may not have come up with entirely by myself…].

Example of where to ‘Disable DirectX 12’ and ‘Enable DirectX 11’ in the Video Settings, in Battlefield 1
[Hmm, this is more of a Workaround than a ‘Fix’ for this issue…]
(Click to see Full Size)

Success! I played a good couple of hours this way, with no crashing, closing, freezing, or errors at all – great! After trying it after re-opening the game, rebooting and playing some more, testing it the next day or two after as well, it seemed ‘solidified’; changing the DirectX level/version from 12 to 11 seemed to ‘solve’ the issue [for me, for now].

I think this is more of a ‘Workaround’ than a ‘Fix’, since it doesn’t solve the issue permanently… there is still something in the game engine or how it communicates with DirectX/Windows/theGPU, which is causing something that is not ‘fixed’ by this step; but, since it does work to get past the issue, I thought I would share, to help others that may be running into this seemingly-popular problem (‘popular’ judging from the queries I found about this issue on both the Battlelog forum and EA Support Forums, spanning a few years now..). I hope this works for you, dear reader, as it seems to have done, for me.

[Since this is not a true ‘fix’ (I do not know if this is permanent nor do I know the actual source/nature of the issue, therefore I cannot say this is a ‘fix’, imo); I will post this with the title “workaround”…]

Addendum:

Other helpful tips/steps that can possibly help, if the above step does not work (and some additional information), can be found in multiple places on the Battlefield and EA forums, such as this list by a helpful poster named STEEiL:
https://forums.battlefield.com/en-us/discussion/54605/directx-function-error-amd-getdeviceremovedreason-error-in-battlefield-1

Good Luck – I hope it gets working for you soon – and See You In The Game!

How to Deal with Yourr Seasonal Allergies

S
Seasonal allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
What are Allergies Anyway?
Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
Strategies for Allergies
Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
Increase your intake of Omega 3 Fatty Acids from cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
Nutritional Supplements for Allergies
There are several highly effective nutrition supplements for allergies including some key herbs.
Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and a good quercetin supplement is a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.    Another excellent Quercetin Supplement is “Qforce” – http://www.qforce.com/ Quercetin is proven to decrease yur chance of contracting a viral illness like the cold or flu by 9 times!
Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

the 2018 La Jolla Concours Best of Show award was presented to the Mullin Automotive Museum for their 1939 Bugatti Type 57SC Aravis Cabriolet.

The Mullin Museum is a must see, they have an incredible collection of Bugatti. Probably the 2nd best collection you will ever be able to see, and probably the only Bugatti collection in the USA available to the public.

http://justacarguy.blogspot.com/2012/01/mullin-museum-what-it-looked-like-from.html  for a quick look

http://justacarguy.blogspot.com/search/label/Mullin%20Museum  for all the galleries from when I was there in 2012

and for a more thorough gallery of this car http://justacarguy.blogspot.com/2011/12/beautiful-bugattis-from-mullin-museum.html  and that’s why I didn’t take another set of photos… there isn’t much reason to look at two sets of the same car.

Fads Pose Dangers, Don’t Listen to Dietary Fads

However, we need to be careful on this question of diet. Many different ideas are prevalent today. Don’t believe all you hear. There may be some elements of truth in a few of these dietary fads, but usually there is some foolish notion hidden underneath that is neither in harmony with science nor with common sense. Don’t be misled.

Regardless of the many fantastic claims that you may hear, there is no one perfect food. There is none that will meet all the needs of the body any more than there is one perfect material that will serve every purpose in building a house. The best diets are those in which there is plenty of variety. Then if any particular element is lacking in one food, it may be amply provided in another. This is one excellent way of avoiding deficiencies in your diet.

Variety is most important. But it is not the complete answer. We must also use discretion in the choice of foods. Some things that may look tasty are not always healthful and nutritious. Foods that are highly refined are less likely to contain the vital elements to meet the needs of the body. Modern food processing may have its good points. But sometimes the vitamins and minerals are lost in the refining process. It is better to use fresh foods whenever they are available. But be sure that they are really fresh.

Diet Start

Some people tend to think that malnutrition is a problem among the less-favored classes of the world. While this is true, it is surprising how often those with higher incomes also suffer from a different type of malnutrition. They eat plenty of food, but mostly of the wrong type. This so-called “hidden hunger” is very common in large cities, where more artificial living conditions prevail. Modern methods of marketing are providing a wider range of foods. But far too many people still prefer to live on devitalized foods that are woefully inadequate. It is these devitalized foods that lead to hidden hunger.

Such diets fail to provide the body with the right building materials that will keep it functioning properly. Foods that contain a high concentration of sugar and other carbohydrates may provide energy, but other important elements are usually lacking. Soon the organs begin to lose their normal powers of operation. The vital processes of the body are slowed down, and a toxic condition develops. The delicate balance of nature is upset, and the whole body suffers.

It is amazing the amount of food that one person may consume in his lifetime. Someone has estimated that we eat up to 1,400 times our own weight in a lifetime of seventy years! Think of how much money we spend in buying all this food! Surely such an expenditure as this is worthy of our closest study. Are we buying health, or weakness and disease? A balanced diet is the very best type of insurance against those degenerative diseases so common today.

It is true that diet alone is not the answer to all of our health problems. Other things must also be considered. But a well-balanced diet will always help to restore those body tissues that have been laid waste by serious disease. And what fun we can have while we are getting well again! So much depends on the attitude of the mind.

Mental Attitudes Important

Centuries ago the wise man gave us a great scientific truth when he said, “A merry heart doeth good like a medicine.” This is absolutely true. It is the optimistic person who usually makes a good recovery. Because he is happy in himself and confident in the future, his health naturally begins to improve. His whole body responds to the sheer joy of living.

But the wise man did not stop there. He also added these significant words: “A broken spirit drieth the bones.” This observation is just as true as the other. A pessimistic attitude soon affects the whole body. It slows down the circulation of the blood. It interferes with good digestion. It takes all the joy out of living. In the end, it may so completely change the individual that he becomes old and worn out long before his time.

Our mental attitudes are very important, particularly as they affect this question of diet. Many of us are shortening our lives without fully realizing what we are doing. Some of us eat too much, often for no other reason than to soothe our injured feelings. Or perhaps we do not take time to eat sensible meals. We grab something and run. We are in too much of a hurry. Then we wonder why we are weak and sick. We do not seem to realize that our diet has much to do with our endurance and also with our ability to resist disease. All the vitamin pills in the world will not make up for the lack of a sensible way of living.

Millions of people are spending fortunes trying to win back their lost figures and restore their flagging energies. All they needed was to apply a little common sense in the first place. No one can hope to have an attractive appearance, a healthy skin, and a clear mind unless he is willing to use discretion in choosing his meals. Even good foods, if taken to excess, may destroy the vitality of the body. Anything that is overdone may cause trouble, even too many vitamins.

A balanced diet is the very foundation of good living. To keep the body functioning smoothly and efficiently, it must be supplied with a constant stream of essential nutrients. This must be clear to all. Yet, it is a shocking fact that many farmers and dairymen are more interested in how they feed their cattle than in how they feed their children! Of course, it pays to see that cattle are well fed. But isn’t it time we begin to think about ourselves and our children as well?

Today, thanks to modern medical discoveries, we have less to fear from serious infections. But degenerative diseases are becoming more frequent on every hand. How can these be avoided in your own particular case? This is something you should feel free to discuss with your own family doctor. He is the best one to advise you on such matters. But there is no question that a good, sensible diet will always help. And when we follow such a program, we will feel stronger and more energetic, our mealtimes will be happier, and we can look forward to enjoying better health for years.

It’s Not Just You™ – Fallout 4 Crashing with NVIDIA’s SHARE Game Recorder (Possibly Relating To The High Resolution Texture Pack) [Notification, Text-Only]

Updated 2017-06-19: I found one cause of the crashes with SHARE and Fallout 4 (for me) – The HRTP

Just a quick post to say that, if you are experiencing Fallout 4 CTDs (Crashes To Desktop, where FO4 closes without any messages or anything and you are left staring at your Desktop in Windows), I want to let you know It’s Not Just You™ – as I am finding I am experiencing this as well, lately…

I haven’t looked into Forums specifically for this, but perusing Forii off and on over the past year or so, where many are talking about Fallout 4 and Crashing, it seems to happen a lot to people anyway, for just about any reason, unfortunately. I myself wasn’t experiencing this very much though (gladly), until just recently when playing FO4 again [and spending way too much time building up Settlements instead of getting Quests done], I was testing out different Game Recording Programs and started seeing this happen.

I’m happily playing Fallout 4, getting frustrated at the Building mechanics or shooting some Raiders attacking my Settlement, when all of a sudden, BOOM – desktop image and icons. No message, nothing. Fallout 4 has closed itself instantly. I of course start it up again and begin to see where I last hit QuickSave or the game automatically Saved for me – but this has happened a few times in a row now where BOOM – the desktop greets me and icons appear. No message, nothing.

So, I tried to pay attention to what I was doing or what was running as Background Tasks – and the one thing I found, that when I changed it, the crashes stopped happening?.. I was recording with SHARE, NVIDIA’s new version of ShadowPlay, their game recorder that is included with their Graphics Driver. Interesting. I have up ’till now had no issues with SHARE, enjoyed testing it out, taking Screenshots with it and testing out the various Quality settings and forgetting about all of those tests and never writing about it. It seems to have great performance (very small performance ‘hit’/effect) and has a decent amount of options/features.

I then tried some other game recording programs I have purchased over the years, Playclaw, Bandicam, Mirillis’ ACTION, and none of them had any Crashing occur while I was using them (although Fallout 4 didn’t seem to like to start up with Bandicam running sometimes [but when I started the game first then Bandicam, it recorded fine]). Hmph. That’s too bad, I was liking SHARE. There could of course be a myriad of things that could be causing this (I have sometimes run into the game not starting up, with a black screen then shutting itself down again/closing, no matter what game recorder I am using – and again, there are people with high-end Intel CPUs and NVIDIA 1080’s with CTDs…); but for me, it seems to be SHARE, at this time. I might go and mention this in the Official NVIDIA Forum, if noone else has recently. Perhaps this is just a temporary issue in this game and their Drivers, in this version.

I am running NVIDIA GPU Driver Version 382.53 in Windows 10 64-bit, on a GTX 1060 3GB GPU, as of the date of this post.

I know this was a Text-Only post, but I took this screenie of the Driver
Version (so I would remember it) and didn’t want to waste it

I mention all of this because, I was not really experiencing any Crashes-To-Desktop with Fallout 4 prior to thinking of testing out SHARE for a while, just a bit ago. I am Level 42 in the game, after ‘starting out a second time’ and enjoying playing again, taking notes and screenshots for some future posts on it, while I slowly build and shoot my way through The Commonwealth… Where was I? Oh yeah, the crashes. It’s sad, but I want others to not feel alone (you’re not, really, go look up “Fallout 4 crash desktop”..). If you are experiencing Fallout 4 closing without any error messages recently, just letting you know – It’s Not Just You™…


Update 2017-06-19:
For my personal battle with this, I did some more testing and found that I was able to use NVIDIA’s SHARE to record with, for quite a long time (hours), when I disabled/uninstalled the High Resolution Texture Pack DLC…
I am not sure if this is the only related aspect to it (as CTDs happen for even GTX 1080 users and higher capability systems than mine and it happens to those not using the HRTP or SHARE at all), but for now, it seems that this issue may be directly related to that [for me] as it crashes far more often than without running the HRTP – and I have no crashes when recording with other Game Recorders and The High Resolution Texture Pack…

Is it that the HRTP is ‘too much’ for my little 1060 with only 3GB of VRAM and SHARE together? 
Is it related to how the game then uses more RAM (I have 16GB of RAM installed) with the HRTP and possibly a symptom of some RAM issues, perhaps?
I’m not sure of a solution yet, so I cannot say – but if you are experiencing this problem of ‘Crashing while recording Fallout 4 with SHARE’, try disabling the High Resolution Texture Pack for FO4 – it worked for me, just now. (Alternatively, use a different Game Recorder for the time being..). HTH

Workout Anytime in Global Atlanta

Workout Anytime in Global Atlanta

WORKOUT ANYTIME was recently featured in Global Atlanta. The article highlights Atlanta based fitness center chain, Workout Anytime adding its first location in Canada this fall. It mentions the new location in Calgary, Alberta scheduled for an October opening. Randy Trotter was quoted about the success Workout Anytime is planning to bring Canada. It also mentions Dustin Taylor and Jeff Gellatelly are the mast franchisees for the new location and grants them rights to open Workout Anyime centers in the provinces of Alberta and Saskatchewan.

You can view the full article here. 

WORKOUT ANYTIME in the Daily News

WORKOUT ANYTIME in the Daily News

Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
View the full article here. 

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    Men’s Body Click Diet part 3

    What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

    Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

    I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

    Diet Start

    The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

    I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

    I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

    I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

    But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

    Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

    It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

    Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

    Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

    See You In The Games!

    Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

    Just a quick tip for when it seems like you cannot record your game ‘at all’:
    64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

    See you in the games!

    Nutritional Strategies for Allergy and Asthma

    SeasSeason allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
    Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
    What are Allergies Anyway?
    Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
    Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
    Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
    Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
    Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
    Strategies for Allergies
    Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
    Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
    Boos
    Increase your intake of Omega 3 Fatty Acidsfrom cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
    Nutritional Supplements for Allergies
    There are several highly effective nutrition supplements for allergies including some key herbs.
    Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
    Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
    Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
    Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and the best form of quercetin is contained in a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.
    Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
    Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
    NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
    You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

    Quick Tip: Guild Wars 2 – How To Split Stacks Of Items

    Just a quick tip for GW2 and those of us who were tying to split stacks of things, only to link them into Chat and ‘shout’ the item’s link to people around us, the entire Map, etc. The way to actually sort things in a more private manner, is to hold down the ALT key and then drag the stack of items to an open slot. A dialog box should come up asking you how you want to split the stack of items (as seen in the example below):

    Pressing the Shift key, as most know, will link the item in the chat box, and pressing Control, will link it and shout it out in Chat automagically – which is nice and embarrassing. I’ve seen some random linkages in the Chat Box [of things that aren’t of any interest] so I know it isn’t just me! I hope that this helps someone out and saves them from this atrocious “Faux Pas”…

    See You In The Games!

    ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

    Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

    http://tywkiwdbi.blogspot.com/

    LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

    The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

    LUXURY GIRLS BEDROOM DESIGN DECOR

    LUXURY GIRLS BEDROOM DESIGN DECOR

    They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

    LUXURY GIRLS BEDROOM METAL DESIGN DECOR

    LUXURY GIRLS BEDROOM METAL DESIGN DECOR

    LUXURY GIRLS BEDROOM DESIGN IDEAS

    LUXURY GIRLS BEDROOM DESIGN IDEAS

    LUXURY GIRLS BEDROOM DESIGN CONCEPT

    LUXURY GIRLS BEDROOM DESIGN CONCEPT

    Guided Math Resources

    I recently went to a workshop about guided math groups, and I have tons of new ideas that I’ll be sharing in the coming weeks. I couldn’t wait, however, to share a couple of the resources that I’m really excited about.

    First, is this book:

    Good Questions: Great Ways to Differentiate Mathematics Instruction, Second Edition  is a resource that I was able to start using with my students as soon as I got it. It is full of open-ended questions and parallel tasks that students at any level could access. It’s organized both by grade levels (K-2, 3-5, 6-8) and domain strands (Number and Operations, Geometry, Measurement, Algebra, and Data Analysis and Probability). It also lists which Common Core State Standards each question aligns to.

    We were working on line plots (4.MD.4) when the book first arrived. Consider these problems:

    You create a line plot that is based on measuring items to the nearest quarter of an inch. You notice that your plot looks a lot like a steep mountain. What might the measurements be and what might you be measuring? Why does it make sense that your plot would look like a steep mountain? (p. 174)

    We had a great class discussion about inferences we can make about data based on the shape of a line plot, and students were really creative about what the line plot could be measuring.

    There was also a parallel task where students could choose how to represent the data.

    The set of data below describes the ages of a group of people at a family party.

    32, 30, 5, 2, 1, 62, 58, 28, 26, 25, 24, 2, 4, 39, 16. 

    Choice 1: Create a line plot to display the data. 

    Choice 2: Create a bar graph to display the data. (p. 186)

    Some students felt more comfortable with bar graphs, but they realized that it was harder to figure out intervals and scales for the bar graph vs. a line plot. That yielded a great discussion about how to choose which type of graph to use.

    This is a great resource to use for student math journals, and it’s one that I will be going to daily. I can’t recommend this resource enough.

    Another math resource that I’m falling in love with for my math workshop and guided math groups comes from the Bridges in Mathematics program. Until attending the workshop, I’d never even heard of this program, but it seems like it’s well-suited for developing math centers and guided math groups. There are some sample tasks available as a free supplement to the the program (to align it with Common Core) at http://catalog.mathlearningcenter.org/free. I’m also planning to purchase their Building Computational Fluency program for $45. I need something more structured and organized for checking students’ multiplication and division fluency in the fall.

    Do any of you use the Bridges in Mathematics program in your school? If so, I’d love to hear more about it — I’m really intrigued!

    Have a great weekend!

    a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

    http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

    The 1 Minute Workout

    The number one challenge people to give to not working out is time.   So the question fitness professionals should be focused on is what is the LEAST amount of time for working out and still producing the benefits and results that people want and need.
    The great news is that there is a lot of well done research on this subject, and there is a proven workout protocol that produces results with as little as one minute of total work time in a workout and a total workout duration of under 10 minutes including warm-up and cool-down.
    The definitive work on this subject was written by Martin Gibala and is appropriately called “The One Minute Workout”.     In this excellent book he reviews all the related research and results on High Intensity Interval Training including an excellent review on the psychology of exercise as it relates to how people feel before, during and after different types of exercise protocols.     Long story short people really like certain HIIT protocols – even high deconditioned people and high-risk heart disease patients.
    He and his team of researchers proved the effectiveness of the 1-minute workout to produce results and also found the specific physiological mechanisms responsible for the benefits of this protocol.
    1 Minute Workout Protocol

    Warm-up for 3 minutes at an easy pace on any piece of cardiovascular exercise equipment, walking, 
    running, jogging or cycling depending on your preference and fitness level.
    Do a 20 second sprint at your best possible pace (this is all relative to your fitness level)
    Do active recovery at a light pace for 2 minutes
    Perform another 20 second sprint at your best possible pace.
    Do active recovery at a light pace for 2 minutes
    Perform a third and final 20 second sprint at your best possible pace.
    Cool-down for 2 minutes.
    Total workout time – 10 minutes!
    Frequency

    Best results are obtained by repeating this workout 3 times per week BUT even once a week will provide benefits and help maintain a decent level of physical conditioning – the key is intensity NOT duration or frequency.

    Recommended Reading:    The One Minute Workout by Martin Gibala:  https://www.amazon.com/One-Minute-Workout-Science-Smarter-Shorter-ebook/dp/B01IOHQ7RA/ref=sr_1_1_twi_kin_2?s=books&ie=UTF8&qid=1517152066&sr=1-1&keywords=the+one+minute+workout+by+gibalaAvailable in hardcover, paperback or kindle.

    ‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

    As the First Post of a new type of article here at The Game Tips And More Blog
    [started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
    What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

    • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
    • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
    And so, here is the first edition of a new addition to this blog, without further adieu:

     

    This Month’s Featured Setting

    Bandicam’s Xvid Codec

    For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

    If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

    The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

    Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

    The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
    Click to see Full Size

    Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
    table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

    Recorded Game Title                     Resolution      Performance Hit (Δ)
    Hitman: Absolution Benchmark 1366×768 ~ 2 fps
    Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
    FurMark (Full Run) 1366×768 ~ 2 fps
    FurMark (Full Run) 2560×1440 ~ 0 fps
    Unigine Valley Benchmark 1366×768 ~ 6 fps
    Unigine Valley Benchmark 2560×1440
    Batman: Arkham City Benchmark 1366×768 ~ 4 fps
    Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
    Skyrim (Introduction) 1366×768 ~ 0-8 fps
    Skyrim (Introduction) 2560×1440
    Minecraft 1366×768 ~ 0 fps
    Minecraft 2560×1440 ~ 0 fps

    table code created by Danny Sanchez (journalistopia.com)

    As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

    Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

    [In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

    Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
    Click to see Full Size
    The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

    Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
    Click to see Full Size
    The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

    [I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

    Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
    Click to see Full Size
    The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

    Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
    Click to see Full Size
    The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

    These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
    Click to see Full Size
    While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

    Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

    The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

    Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

    When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

    One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
    What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
    The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
    Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
    table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
    Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
    Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
    Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
    FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
    FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
    Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
    Unigine Valley Benchmark 2560×1440
    Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
    Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
    table code created by Danny Sanchez (journalistopia.com)
    Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
    The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
    Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
    As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
    The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
    Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
    Click to see Full Size

    Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
    Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



    See you in the games!


    Personal Short Version/Opinion:


    While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

    I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

    As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

    Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
    Last Remarks (in addition/continuation to the Prologue of this article): 
    Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
    As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
    This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
    In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
    Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
     [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

     **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

    INCREDIBLE HOME DESIGN WITH NATURAL LIGHT

    This 94 square meter apartment has a privileged location on the corner of the building. Looking for an apartment in well appointed with three bedrooms, one next to the park, with open views to the outside and green space overlooking the street, while the kitchen opens onto the courtyard and peaceful atmosphere. In the middle is a spacious hall and in relation to this, a new bathroom. The general plan with large windows on three sides and bright colors fill the room with light. It is difficult to decide which of these rooms, we love the most.

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    Blog Hunting

    Today I was hoping to link up with Laura Candler’s Corkboard Connections Blog Hunt, but it seems that linky closed already [sadface].  Still, I want to share a little about what I’m using as my Google Reader alternative and why.


    In my mind, this is a battle between BlogLovin’ and Feedly.

    BlogLovin’

    I’ll confess that I didn’t move over to this platform initially. As soon as I caught wind a few months ago that Google Reader was dying, I quickly packed up and moved over to Feedly. With all of the recent push in the teacher-blogger community toward BlogLovin’, however, I decided to give it another try.
    What I like
    As a blogger, there are a few features that I really like about BlogLovin’. 
    1. Notifications and Blog Finding
    I like that I can get notifications when new people start following me. I also like that when I click on those notifications, I can see what other blogs people are reading. I’ve stumbled upon some great new-to-me blogs that way over the past few days. 
    2. Viewing actual blogs
    Rather than seeing a stripped down version of someone’s blog, I can see the actual website in a BlogLovin frame. This allows for easy commenting when I want to leave comments. It also lets me see how cute everyone’s blog is these days.
    What I dislike
    1. Too many clicks
    It seems like it takes forever to navigate sometimes, and I’m constantly clicking to mark things read, jump between blogs, and if I actually leave a comment on a blog, I lose my place in BlogLovin and have to start over with the remaining unread blogs. I subscribe to hundreds of blogs, so I have to be efficient when I’m looking at content. 
    2. It’s still buggy
    I tried to go back and organize the blogs that I read into categories the other night, and I found that BlogLovin wasn’t saving my organizational changes for blogs unless I categorized them as soon as I started following them. That was annoying. I also noticed that some blogs that I’m certain I was already following were showing up as unfollowed. Others were showing up multiple times in my reading list. I suspect that a lot of these bugs will improve — I saw iPad updates for the app yesterday, so I know they’re working on it, but I wish a lot of these features were already working better.

    Feedly

    Since I’ve been using this for a few months already, I’ll openly confess that I’m a bit biased. It may also be the case that I’ve got this platform more figured out than BlogLovin, and some of the “advantages” of Feedly may exist in BlogLovin, too. But here’s what I’ve found…
    What I like
    1. Better app integration
    There are several different apps that I like to use when I’m reading blogs (and in this case, I’m talking about web-based apps, not iPad apps).
    Pinterest – Feedly has Pinterest integration built in, so I can hover over an image and pin it straight from Feedly. The pin will link back to the original blog.
    Buffer – Buffer is an app that I use to schedule Tweets so that they’re spaced out throughout the day rather than sent all at once as I read blogs. If I read a blog post that I really like, I’ll send it to Buffer to share with others.
    IFTTT – If This Then That is an app that sets up certain actions based on commands that I give. For example, if I star an article that I like in Feedly, it will automatically send it to my Evernote notebook with tags that I set. There’s a whole list of IFTTT recipes for Feedly here. 
    Evernote – I can send items straight to my Evernote notebook from Feedly as one of the sharing options.

    2. Easy navigation
    There are lots of easy keyboard shortcuts to use to go through articles when I’m reading on my computer, and it’s very easy to organize articles in categories. Even when I’m behind in my blog reading, I can get through it pretty quickly without feeling like I’m missing important content.

    3. Marking articles
    I know I can “heart” articles on BlogLovin, but I can mark articles on Feedly for later with specific tags that make them easier for me to find. For me, that’s a better equivalent to starring articles on Google Reader, and I did that a lot.

    What I dislike
    1. Somethings get lost in translation
    Sometimes the pictures don’t get pulled into Feedly correctly (which might not be Feedly’s fault), and I probably miss out on some cool content because of it.

    2. Commenting is more complicated
    I still have to click to go to the external link of the original blog post to comment or read comments. This is especially complicated when I’m using the iPhone or iPad apps. When I’m on a mobile device, I usually mark the article I want to comment on for later and check it out when I’m back to my computer.

    And the winner is…Feedly, mostly

    At least for now, I’m sticking with Feedly. I still like visiting BlogLovin’ to find new blogs to follow, but my new strategy is to follow on BlogLovin’, and then I add it to a list called “On My Feedly.” Then I add the blog to one of my reading lists on Feedly. Then when I go into BlogLovin’, I can immediately mark the “On My Feedly” list as read because I’ll know I’ve seen it all on Feedly. There are a bunch of new blogs that I started following as I was trying out BlogLovin’ that aren’t on my Feedly list yet, so that will be a process to move those over. It’s not a perfect system, but I expected some growing pains in the transition. 
    I’m going to continue to use BlogLovin to discover new blogs because that’s a huge benefit in my mind.
    Where did you land in the Google Reader alternative battle? I’d love to hear what you chose and why in the comments section! 

    Gain weight especially fat: Here’s what make you do

    1. Food reactions cause fluid to surround invading food particles. When food macromolecules are identified as foreign invaders, your body launches the inflammatory response, which includes flooding an area that’s under attack. Your body will hold onto this water as long as reactive food substances remain in your tissues. This water dilutes these substances and reduces their effects, but at the same time the cells and tissues swell with water. This often accounts for swelling under the eyes and chin, in the hands, feet, ankles, and midsection.

    2. Food reactions release hormones that cause fluid retention. To offset the effects of the allergic inflammatory response, the body produces hormones, such as adrenaline. But these hormones cause water retention. The adrenal hormones cortisol and aldosterone increase sodium uptake, and sodium attracts water to cells and tissues.

    This action also triggers other hormonal changes, apparently through effects of the pituitary gland, which orchestrates your body’s ‘hormonal symphony.’ These other hormonal changes may include excessive secretion of anti-diuretic hormone, which causes fluid retention. Anti-diuretic hormone is also often secreted in response to stress, and is commonly released by women as part of premenstrual syndrome. The female hormone estrogen, which can be affected by food reactions, also increases water retention. Furthermore, growth hormone, which helps boost the metabolism, can be depressed by food reactions.

    Diet Start

    Besides these hormones, which circulate throughout the body, food reactions also have strong effects on certain gut hormones (including cholecystokinin and somatostatin), which can cause water retention and swelling directly in the gut tissues. Sometimes, when people experience immediate abdominal swelling after eating, it is due to the influence of gut hormones.

    Because women tend to have more problematic hormonal profiles than men, the hormonal elements of false fat tend to be worse for them. For example, when some menopausal women are given extra hormones, their bloating and swelling increase.

    When people stop eating their false fat foods, however, these hormonal problems usually stabilize quickly.

    3. Food reactions make intestinal membranes swell. There is often pronounced swelling of intestinal membranes, in response to irritation by allergens and in response to hormonal imbalances. This can account for the ‘pregnant’ look that often characterizes false fat. The result of this type of swelling is a feeling of heaviness and congestion in the abdomen, particularly in the small intestine.

    4. Food reactions disrupt cell chemistry, causing fluid storage. Food reactions cause a condition called cellular acidosis, which harms cell chemistry and results in fluid retention. Here’s how it works. The inflammatory response, caused by food reactions, causes calcium and sodium to enter cells, and this attracts water. It not only causes swelling, but also depresses the function of the cells’ energy centres, or mitochondria. When the mitochondria are disturbed, it saps your energy.

    This action also causes even more release of the stress hormones cortisol and aldosterone, which try to correct the chemical imbalance. But this in turn just causes more fluid retention.

    Furthermore, as the food reactions subside, the cells release all of these acidic chemicals into the tissues. This can cause a new round of inflammation and the release of even more protective fluids. Over a long period of time, this tissue acidity can contribute to the onset of degenerative diseases, including arthritis.

    5. Food reactions cause capillaries to leak fluids. As you may recall, many food reactions release chemicals, such as histamine, that make blood vessels expand and contract, in the process leaking fluids into tissues. This leakage of fluids causes further inflammatory reactions, with accompanying swelling. Sometimes this swelling can impinge upon nerves and cause aches and pains. It can also cause hives, due to the swelling of capillaries near the surface of the skin.

    Often, when this fluid leaks out of capillaries, it carries protein with it. This protein in turn attracts sodium, which causes even more fluid retention. The combination of sodium and fluid outside the cells can ‘smother’ cells by making it harder for oxygen to reach them. This contributes to further cell malfunction, and even to the death of cells.

    When cells die, even more water is drawn to the area to flush away the dead cells.

    6. Food reactions cause gas production. Food reactions allow the proliferation of abnormal bacteria and yeasts, and these factors lead to fermentation of food. Fermentation, primarily of carbohydrates, forms wind or gas, including methane.

    Secondarily, it creates by-products of alcohol metabolism, such as the chemical acetaldehyde, and alcohol itself. Both of these substances can impair mood and cognitive function when absorbed by the body.

    Food reactions also tend to slow the natural squeezing of food through the digestive tract by the bowel-muscle process of peristalsis. When food transit through the bowel is slowed, more gas and fermentation products are produced. Also, this `constipation effect’ causes more irritation of the bowel lining. This can create even more gas and can also contribute further to leaky gut syndrome, allowing reactive macromolecules to slip through the intestinal wall.

    Bacterial overgrowth in the small intestine also causes fermentation and gas. This causes pressure and discomfort in the small intestine, because the small intestine is relatively narrow and doesn’t have much room for expansion. Another major contributor to gas buildup in the small intestine is lack of the digestive substance hydrochloric acid, which is abnormally low in approximately 70 per cent of all people over 60. Hydrochloric acid, or stomach acid, also tends to be chronically low in people who are under stress, in people who eat lots of processed foods, and in people with food reactions.

    Gas formation is also increased by use of anti-inflammatory drugs, such as aspirin, which irritate gut mucosa. It can also be exacerbated by antacids.

    In addition, poor digestion also causes increased excretion of the amino acid taurine, which lowers cellular magnesium and slows peristalsis, resulting in more intestinal gas.

    Lastly, women’s menstrual cycles upset hormonal balances, and this also impairs peristalsis.

    All of these factors are insidious. They feed off one another and contribute to bloating and swelling. The result of this entire range of forces is a swollen, distended belly and puffy, spongy flesh all over your body. Until now, you may have thought that this was fat. Now you know it’s not. It’s false fat — and you can get rid of it in a week or less if you make the necessary effort.

    I’m sure you can do it! Every day that you make the effort, you’re going to feel a little better. You’ll look better, too.

    My trip to Kuala Lumpur, Malaysia and Singapore, July 2010

    This was my first trip on a budget airline (Air Asia); it definitely changed my opinion of budget airlines. This trip is more a business development and prospecting trip rather than an assignment. On the surface KL does look developed. However I have my doubts regarding the psyche of the Malaysians. I took in the usual site such as the Petronas Tower etc. The weather, the fauna and flora resembles Colombo; I did not enjoy the high humidity and the afternoon thundershowers.

    Singapore was as usual (I have stopped counting the number of times I have been there) very orderly and hit the usual shopping and fun places. In my opinion the Singaporeans have not only developed in terms of the look and feel of the place but also in terms of the psyche of the people. I truly believe that they do think like westerners and the Japanese.

    Let me give a classic example. As mentioned earlier I went to Malaysia and Singapore during the monsoon season and I made an observation. In KL when it rains; like in Sri Lanka the people stopped what ever they were doing and took shelter from the rain. Those who even had umbrellas took shelter as it appear they did not want to get there footwear wet.

    However, in Singapore it was very different. I happened to be out one day early morning (going for a walk) when it started to rain. I was walking pasta a primary school and this is what I saw. A teacher was leading a group of very small children (6-7 years) who were clad in rain gear and they walked in a line and came out of the premises and they walked to the MTR station and got in to the train. Undoubtedly they were going on some sort of educational trip. What does this mean: In my opinion the Singaporeans are teaching their children to face obstacles and overcome / work around / find solutions to them. This is the essence of the psyche of an industrialized nation as opposed to an agrarian nation which generally accepts the affects of the elements as “gods will” or “karma”.

    So even the very small children are trained to deal with a simple thing as the rain and have an attitude of using the right equipment to allow them to go about their daily business. So in adult life they do go and conquer the world economically.

    I can certainly say that in Sri Lanka the vast majority of people have this agrarian psyche. Based on my observations it seems that quite a number of people in Malaysia still do too. So the challenge for those of us who have the privilege of influencing people is to; in some way contribute towards instilling the right attitude rather than anything else. I can say from my experience as a consultant and a trainer I derive more satisfaction in seeing this than my clients make huge profits. I say this because these individuals with the right attitude have the potential to influence / be a role model for the masses in these underdeveloped countries.

    Innovative Office Furniture Sets Were Designed by Vitra

    These new and innovative office furniture sets were designed by Vitra and are basically practical approaches to the concept of “Citizen Office”.

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    This term was invented by the company in 1991 and taken to another level with the furniture collections below. Jo Kaiser (manager for the North American branch) gave a statement which summarizes the idea of the project: “we believe you should use an office like you would a city”. In other terms- more comfort while making the most of the available space. Here is further information from the company: “A Citizen Office encourages the occupants to work using a range of postures and to move within the office as much as possible. Working while standing or assuming various casual postures provides variety and relaxation while maintaining employee health. The Citizen’s Office takes us a step further than traditional ergonomics – physical activity is integrated with office etiquette in a natural manner. “

    Managing the Work/Rest Ratio in HIIT Training

    High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
    Fixed Work, Fixed Recovery
    This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
    Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
    Fixed Work, Variable Recovery
    In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
    Variable Work, Variable Recovery
    This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
    Have some fun and experiment with each of these to prevent plateaus in your workout progress!

    Giveaway Winner!

    I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

    I went to the Random Number Generator this morning, and drumroll…

    I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

    And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

    Have a great weekend!

    Getting Started with a Flipped Classroom

    Last week, I shared a bit about why I flipped my classroom, and I got some great questions! Today I want to share a bit more about my process and the logistics for flipping. There are lots of ways to do it, and I’m sure there are many other great ideas out there, but this is what has worked for me so far.

    1. Plan your lessons 

    a) Does it make sense to flip?
    You don’t want to flip for the sake of flipping. I always ask myself, “Would this lesson make sense as a flipped lesson?” There are times when some introductory lessons require lots of hands-on scaffolding, and my answer might be “no.” But other times, when the lesson is mostly information and practice, the flipped model absolutely makes sense.

    b) What content must be covered?
    I go through my math lesson plan, and determine the content that has to be covered in the video. I’m really selective about this because I want my video to be less than 10 minutes long. It’s still a mini-lesson, after all, and if I go any longer than that, my students will tune out. Plus, even though the video may be 10 minutes, the viewing time could be much longer than that if students are pausing the video to write things down or take notes. I try to keep in mind the idea that less is more.

    c) Am I the best person to deliver the content?
    Usually my answer is “yes,” but not always. I’ve tried to share videos from Khan Academy or LearnZillion in the flipped model, and the kids just didn’t respond as well to those. They’re more likely to tune in when the video is made by their teacher because they have a personal connection. There were a few times when I’ve used someone else’s videos because the production was significantly better in some regard (e.g., it included songs or humor that I couldn’t pull off). But usually, I make the videos myself.

    2. Choose your tools

    Once I know the content of my lesson, I decide what method I’ll use to produce the video. I choose from a few different options.

    a) Screencasts
    Sometimes I have a presentation already created in a flipchart for my ActivBoard, and I can just film my voice interacting with my computer screen on that. My favorite tool for screencasting is Screencast-o-matic. It’s very user-friendly and it uses a yellow circle to highlight your mouse so students know where to focus their attention. The free version works well, but for $15/year, you can get lots more editing and uploading options. If you’re interested in screencasting, I would recommend trying out the free version for a while to see if it’s something you’d like.

    b) Whiteboard apps
    Usually I use whiteboard apps such as Explain Everything or Educreations to make my flipped lessons. I always create the slides in advance so that I don’t waste precious recording time writing out problems or building models that could simply be explained. Then once all of the slides are in place, I’ll record the audio over them. This approach also allows me to work in pieces, too, because I never know when I’m going to get interrupted.

    c) Paper slide shows
    I’ve blogged about paper slide shows before here. Sometimes the lessons are a bit more hands-on (e.g., using a protractor), and I want to show students some examples. In those instances, I use my DEWEY Document Camera Stand ($120, www.copernicused.com) that turns my iPad into a document camera, and I work and film underneath it. I mostly use this approach with Geometry and Measurement standards, but when I need to do a lot of physical manipulations, the paper slide show works well.

    3. Choose your platform

    Once I’ve made the video, I need to upload it to a platform for students to view. YouTube is blocked for students at my school, so I use Vimeo instead. I ended up buying a Vimeo Plus subscription last year ($59.95/year or $9.95/month). That gave me much more space for uploads each week (5 GB vs. 500 MB with the free version), and it sped up my upload times, so it was worth it to me when I was crunched to get the videos uploaded after school. I created a channel for some of my videos, and now I’m going back to re-make some or better tag/organize the videos for each unit.

    4. Share your content

    Once the videos are uploaded on Vimeo, I needed a way to share the links to the videos. When I started, I was posting the links after school each day, but I eventually cut out that step. Now I make one Google Document each term with all of the dates and lesson topics, and then I just copy and paste the links into that document as they’re done. That helps my students because they find the video links in one spot, and I can post the links as they’re available. Here’s an example of what that document looked like one term.

    Bonus Tips

    1. Make your videos in batches. 
    I found it much easier to make all of my videos for the week at once. I could usually tackle this in a couple of hours each week, and it was much less stressful than trying to film every day. I was able to find my rhythm with the process when I batch-produced videos, so that’s how I try to work now. 
    2. Start small.
    Even if you only make one video each week, you’re still starting to build a library of flipped lessons for future use. I didn’t make as many videos as I’d wanted to last year, but I’m grateful for the ones I already have done because that’s less work I’ll have to do this year.
    3. Divide and conquer.
    See if someone else on your grade level team would be interested in flipping with you, and then divide up the lessons. Even if you’re not the one teaching the lesson in every video, the students will appreciate it being someone they know. 
    4. Get some cheap .mp3 players for student check-out.
    Most of my students had Internet access at home to watch the videos, but a couple didn’t. I wrote a grant to buy 10 inexpensive .mp3 players that students could check out to watch the videos. They didn’t require an Internet connection because I saved the videos straight to the hard drives, and since they were cheap .mp3 players (<$20 each), they didn’t have any bells and whistles to make them targets for theft. It was a workable solution for those students who lacked technology access at home. 
    Next week, I’ll share more about what my math block looks like under the flipped model. Until then, I’d love to hear from you. What are some tools you use for video production in your class? What challenges do you foresee with a flipped model? Share your thoughts in the comments section.

    The Game Tips And More Blog’s Ludo Ludi (Game Play) #1-3

    I wanted to start a video series that was Random Gameplay Video Clips that I have collected over time. I started out calling it FLASHBACK, creating a logo for it and everything; but I wanted a way to archive/share them out a little bit faster/easier, rather than ‘Featuring’ them every time, so I came up with the concept of “Ludo Ludi”.

    It means “game” and “play” in Esperanto. The idea was to not label the gameplay clips or state what they are, in order to have other people enjoy the “surprise reminiscence” of the games. Viewers could try to guess what they are for fun or just enjoy them as part of a playlist where they didn’t know what was coming next. For the most part it would be easy to guess them of course; if you played the game, you’ll know what game it is and what class I played, etc.etc. But, I still thought it would be entertaining to have a bunch on a playlist of some sort, with no obvious names, having a transitory video (without logos/intros) of something loopable such as static – as though changing the channel on a television – in-between videos. With Youtube’s Playlist and Randomize features, this can now be done and one can sit and reminisce on games of yesteryear with my video clips showing snippets of gaming moments recorded from a wide variety of games! Everyone with ADD/ADHD can just click the Next button on the playlist to skip to the next one if the current one isn’t holding their interest! Everyone is a winner! With this in mind then, I now present one long paragraph and the first three installments of :

    The Game Tips And More Blog’s New Gameplay Video Series, “Ludo Ludi (Game Play)”





    Enjoy and See You In The Games!

    MODERN SWEDISH BEDROOM DESIGNS GO SROP

    Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    Battlefield Play4Free – PlayTesting The XM8AR LMG (3 Full Rounds – Myanmar, Dalian) Raw Gameplay [Unedited] Gameplay Video

    Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens (now called Play4Free Funds) that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a random draw of eight and it will generate an item for you.

    The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

    I recently won the XM8AR in The Daily Draw (for one day of use) on my Medic and thought I’d try it out and see how it felt and quickly write a post about it [I’ll call these PlayTests]. I am not a gun expert or know a lot about the statistics of the guns, but I will discuss briefly here how the gun actually feels and plays, especially compared to the Medic default, the MG3 Light Machine Gun. I played a few rounds with XM8AR LMG and recorded the first three full rounds. Here they are, shared unedited for you [a ‘Raw Gameplay’ video]:

    Recorded with: Bandicam @1080p (HD) using the x264/H264/AVC Codec
    Recorded game: Battlefield Play4Free (MMOFPS, a F2P game/Microtransactions)
    Recorded levels/maps: Myanmar (Jungle, Assault), Dalian Plant (Rural Industrial Port, Defense then Attack)

    [YouTube did something with the Aspect Ratio of this video and I had to use a command in the Tags section to fix it. Let me know if anyone has problems viewing this video properly]

    Normally locked until Level 15, the XM8 felt great to use on my Level 10 Medic. It’s ammo box is a little smaller at 60 rounds (vs. the default Medic’s MG3 having 80 rounds), but it never felt ‘cramped for shots’ and didn’t feel like it took too long to reload.

    The XM8AR Light Machine Gun is normally locked and cannot be used until your Soldier is Level 15, unless it is bought outright or won in The Daily Draw. Click to see Full Size

    The nicest thing about the XM8 was the accuracy. You could really tell you were going from the “Low” rating of the Medic Default MG3 to the “High” rating of the XM8AR.

    Comparison of basic stats between the default Medic gun, the MG3, and the XM8AR

    Looking down the sights, the three-prong irons of the front sight are quite thin and easy to line up in the view of the rear sight, which is in the form of a circle. There is only a little bit of a pull up and slightly to the right, but the recoil is very small and easy to compensate for once you get used to it. I even felt comfortable shooting from the hip and at a distance because this gun felt so darn accurate compared to the starting weapon for a Medic.

    The thin front prongs of the iron sight feel easy to line up for targets farther away and the XM8AR feels like it is very accurate, as can be seen by this Headshot from across a courtyard in Myanmar. Click to see Full Size

    An all around great gun, it was fun as hell to use for a day. For only 300 Credits you can try out for a day of play, too. If you have 1250 spare Play4Free Funds you can purchase it permanently. It is a nice accurate gun to run with and may be worth it. Try it out for yourself sometime.

    Have fun and See You In The Game!

    Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

    10 TIPS TO DECORATE KIDS BATHROOMS

    Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

    KID’S BATHROOM DESIGN

    KID’S BATHROOM DESIGN

    1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

    2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

    3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

    4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

    5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

    6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

    DECORATING KID’S BATHROOM

    DECORATING KID’S BATHROOM

    7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

    8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

    9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

    10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

    Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

    LUXURY DECORATING KID’S BATHROOM

    LUXURY DECORATING KID’S BATHROOM

    WORKOUT ANYTIME on WFMY News 2

    WORKOUT ANYTIME on WFMY News 2

    The WFMY News team had WORKOUT ANYTIME Franchisee Jeff Cook on the show to talk about how to do explosive exercises in just a few minutes each day. Mary Anne Mills from WORKOUT ANYTIME was also on the show from WORKOUT ANYTIME and they went through 4 different exercises that can be done at home to burn calories fast. In the next segment Mary Anne and Jeff went through exercises that show moms how they can work out while being pregnant. Mary Anne goes through exercises that build up endurance for labor and how to keep off weight while some moms “eat for two”. They went through the different cardio machines that keep the baby safe and go through a donkey kick exercise. Lastly, the station mentions where the WORKOUT ANYTIME is located in Greensboro and how to get more information on personal training sessions.


    You can view the full segment here. 

    WORKOUT ANYTIME in Buffalo Grove Patch

    WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

    24/7 Gym Opens in Buffalo Grove
    By: Cristel Mohrman

    Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

    The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

    Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

    “We really like this location a lot,” co-owner Eric Nagel said.

    (Read More)

    And More: Deals and Sales – 2014 Summer Super Sales

    Just to let more people know, in case some didn’t already, there are a lot of great Summer Sales going on right now at various game distribution/retailer websites [think of them as ‘Winter Wonder Sales’ if you are in the Southern Hemisphere]. Here are a couple samples:

    Good Old Games, now called GOG.com, have both ongoing sales and Time Limited Deals, with games such as The Hitman Series, Simcity2000, the Baldur’s Gate and Icewind Dale series, the Might & Magic series, the Wing Commander series, Quest For Glory and King’s Quest series, the Rollercoaster Tycoon series, and much more
    (Click to see Full Size)

    Steam is having it’s Summer Sale, that also has some ongoing deals with some Time Limited Sales, with games such as The Witcher series, Euro Truck Simulator series, the Left 4 Dead series, the Total War series of games, Red Alert 3, Civilization 5, and much more
    (Click to see Full Size)
    Some of these are Time Limited Deals, meaning that they are only ‘on’ for a few hours, or change after a few hours – so check back there once in a while and see if any games you have been waiting for are on sale – most of these are 80% or 90% off!
    [For the most part, they seem to ‘stay’ on sale/remain on sale, but at a slightly higher sale price than within the ‘time limit’ (but are still available at less than regular price)]
    I hope you find something you like and See You In The Games!

    Reverse Lunge with Diagonal Lift

    Lunges are a fantastic functional lower body exercise, and the benefits can be enhanced by adding an upper body component to the basic lunge movement pattern. One of the most productive total body lunge variations is the reverse lunge with a diagonal lift.
    The exercise improves hip mobility in the front of the rear leg, while also increasing strength and stability in the front leg and increasing core strength and mobility. Specifically, it improves hip flexor mobility while training the body to move smoothly in the spiral line. It also encourages proper tri-planar movement.
    Start standing with feet shoulder width apart in upright posture. Hold a medicine ball, dumbbell, or kettlebell (or even a body bar) positioned at the right hip pocket region. Step back with the right leg to perform a reverse lunge. At the same time move both arms diagonally up and back over the left shoulder until a comfortable stretch is felt in the anterior (front) of the right hip. Do NOT allow the back to arch. Pause in this position for one or two seconds.
    Do 10 – 15 repetitions on one side then repeat on the other side. It is important that you keep both feet facing forward and keep your trunk upright throughout the movement.
    Regressions:
    Perform the movement without a medicine ball, dumbbell, or bar
    Start in the split stance lunge position instead of having to step back
    Progressions:
    Increase weight you are holding.
    Perform the movement in an alternating side manner vs one side at a time.
    Video Links: https://www.youtube.com/watch?v=JDyGhcm-aVs

    Marathon Training Tips

    As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
    Determining Starting Point

    The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
    If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
    If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
    Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
    So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
    In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
    Training Mix

    Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
    It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
    There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

    Strength and Mobility Training

    Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
                A specific dynamic warm-up and foam rolling for areas of tightness and pain
    Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
    Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
    Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
    Strength Training Exercises for Running
    It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
    It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
    Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
    Putting it all together

    If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

    CONCEPT KIDS ROOM PAINT COLORS DESIGN

    KIDS BATHROOM PAINT COLORS

    Looking for ideas for decorating Kids Room Paint Colors? Enter a space about the longevity of choosing background elements that are long lasting. Then use the equipment, bedding, area rugs and cheap to create themes easily hangeable. Unlike other rooms of the house, which mainly reflects your personality, decor rooms children requires slightly different approach. If you are a first time parent or a veteran, decorating baby rooms are not childs play.

    This is a very complex process in which an adult is to incorporate all the safety features and mix with a childhood fantasy. The room is a device identification of the child, not yours. But the change of the children, then you need to think ahead: the design is easy to change a child of five years or two? There is room for storage, research, animal or doll collections, or a wrestling match?

    First, consult with the child. Be sure to consider the child likes or dislikes when decorating their space. Decorating the kids room paint colors is a work in progress – planning begins before birth and continues throughout childhood. You can be as creative and on top of your child you are dynamic and playful colors work well in a child’s room. Always paint childrens rooms with a semi-gloss, if the walls are easy to dry without being too bright.

    Regarding storage, check your local do-it-your-own for a wide range of affordable solutions. As children grow, learn, play and explore their environment should respond. Children will love the exciting makeover, because they focus on their preferred interests in all age groups. As your child grows, ask for their input for kids room paint colors.

    KIDS ROOM PAINT COLORS
    KIDS BEDROOM PAINT COLORS

    Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

    Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

    A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

    However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

    Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

    I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

    Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

    You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

    Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

    [Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

    Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

    Easy or Hard to Digest

    The faster your body can digest a carbohydrate, the higher its dieting index value. There are two major types of digestible polysaccharides or complex carbohydrates: amylose and amylopectin. Both contain many glucose units, but the foods with more amylopectin raise the blood glucose levels much more readily than foods containing more amylose. The branches in amylopectin starch have many surface areas, which make it easier for digestive enzymes to break it down faster.

    Diet Start

    These easy-to-break-down starches include foods such as most breads, white potatoes, white flour, and snack foods such as pretzels, donuts, and cookies. Most of these foods are also processed or refined carbohydrates, but some natural unprocessed carbohydrates have higher amylopectin levels, including parsnips, russet potatoes, and rutabagas.

    Starches that contain more amylose include some whole grains and legumes (lentils, dried peas, and beans) and some of the starchy vegetables such as yams and sweet potatoes. These foods are best for your dieting index weight-loss program.

    Dietary Fiber

    Most dietary fiber is not digestible. In other words, you might consume the fiber, but there’s a good chance most of it will not be digested such that the nutrients enter your bloodstream. Instead, the fiber is excreted in your stool. There are two major types of fiber: soluble and insoluble. Mostly it is the insoluble fiber that does not get digested, but both types of fiber slow the rate of carbohydrate breakdown into blood glucose. Because of this, it’s great for you to eat lots of dietary fiber. Ideally, you should consume 25 grams or more every day.

    Don’t overdo the fiber. But you’d need to consume a virtually unpalatable amount of fiber supplements, such as psyllium husks, to eat too much fiber—such as 4 or 5 tablespoons a day. With too much fiber, you could actually block the absorption of important vitamins, minerals, amino acids, and more. Overeating fiber can, in essence, make you undernourished. (And undernourished doesn’t equate to being thinner.) More than 45 grams of fiber a day is generally too much for most of us.

    DECORATING IDEAS FOR GIRLS BEDROOM GOOD

    True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

    DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM

    DECORATING IDEAS FOR GIRLS BEDROOM

    WORKOUT ANYTIME in Journal & Topics Newspapers

    WORKOUT ANYTIME in Journal & Topics Newspapers in an article titled, “New 24-Hour Fitness Facility Opens In Buffalo Grove.” The article begins with information about the new club and then gives some details about the grand opening. The article ends with information on WORKOUTANYTIME’s plans for expansion in Illinois and some background on Jeff.  Click here to read more or begin below.

    New 24-Hour Fitness Facility Opens In Buffalo Grove

    A new 24-hour fitness facility recently opened in Buffalo Grove.

    Workout Anytime opened at 700 Buffalo Grove Rd. The facility is open 24 hours a day to members with staff on site from 9 a.m. to 8 p.m. weekdays; 9 a.m. to 5 p.m. Saturdays; and 10 a.m. to 2 p.m. Sundays. Members receive a special key card to unlock doors when staff is not present.

    (Read More)

    My Trip to Bangladesh June 2011. Cont…..

    The assignment is now over; managed to progress the milestones without much trouble given that I lost a total of 4 days to strikes. The draft evaluation report was well accepted by the client; now comes the tricky part getting comments on the report. There are basically 2 types of comments that a consultant is likely to get on a report. The first being, comments regarding the structure / formatting and style of the report and some times regarding the language. We have all had different educations and are used to a particular vocabulary; further at some point in our lives we have written a report and we generally stick to that structure while accommodating subject related topics. My rule of thumb is that I give in to these requests as it is just not worth the discussion regarding it. I prefer to use that time for some thing else. The second being, comments regarding the contents such as findings, recommendations etc. Here I generally play hard ball, unless I am presented with an argument backed by facts / proof. This goes to the hart of your position as an independent, unbiased professional consultant. I look forward to these comments as they challenge your thinking and help you to be a better consultant as well. I am supposed to get all the comments by next Friday as the end of the assignment / submission of the final report scheduled after 2 days of receiving all the comments.
    During my last week in Dhaka my health deteriorated (food poisoning). My fault for eating some pastries (short eats) offered to me during a meeting. Momentary laps of concentration. . I have been coming to Bangladesh since 2006 and this is the first time this happened to me. My dread was the journey back to Colombo which I made with the aid of Imodium. I know this drug is banned in some countries but it is a life saver when traveling.
    I do not have any other assignments lined up at this moment. Now that I am back in Colombo I need to tie up some outstanding issues. These are in fact 3 reports, 1) finalizing the report for the current Bangladesh Assignment, 2) finalize the Strategic Plan for my client in Batticaloa and 3) Submit a reflection I did for myself for the institute of consulting.

    The Role of B-Vitamins in Preventing Brain Loss

    One in five people older than 70 suffers from cognitive impairment which will progress to dementia and death in half of these people within five years.  So it is very important to address all the modifiable risk factors for cognitive impairment.   One of these risk factors is elevated homocysteine which is a strong, independent risk factor for Dementia, Alzheimer’s Disease, and Heart Disease.  
    One of the longest and most comprehensive studies ever done showed that one in six cases of Alzheimer’s Disease can be caused by increased homocysteine levels.
    In order to process homocysteine properly the body needs adequate levels of Folic Acid (Vitamin B-9), vitamin B12, and Vitamin B6.   A double-blind randomized controlled trial showed that the reduction of homocysteine by B Vitamins can slow the rate of accelerated brain atrophy in people with mild cognitive impairment which is often the first step towards Alzheimer’s Disease.
    Another study showed that B-Vitamins can reduce brain loss in areas prone to the Alzheimer’s Disease process. 
    Other Benefits of B-Vitamins
    B-Vitamins as a group are incredible important to a wide range of cellular and metabolic functions from energy production to production of hormones. Benefits of optimal levels include increased energy, improved mood, reduction of allergy symptoms, help preserve vision, help to maintain bone strength, and help prevent heart disease and stroke.
    How do I get B-Vitamins?
    Although it is possible to get the RDA of B-Vitamins through diet alone it requires a carefully planned diet and for vegetarians it is very challenging because there is no vitamin B-12 in vegetables. Milk, yogurt and cheese, along with eggs, are the only vegetarian food items that naturally contain significant levels of vitamin B12.
    In addition many people have conditions which prevent optimal absorption and cellular uptake of certain B-Vitamins such as Folic Acid.   Each of the key B-Vitamins come in several forms with some being much more active and effective than others.   When everything works right the body can convert other forms to the active forms, but there are many things that interfere with this process.
    For example Intrinsic factor produced in the stomach is what allows the intestines to absorb this vitamin.  Not everyone produces intrinsic factor so common sources of B-12 are not effective.
    Also since B-Vitamins are water-soluble excess amounts are easily and safely excreted so taking a high quality B-Vitamin Supplement or Multiple Vitamin with activated forms of B-Vitamins in adequate amounts is the safest way to cover yourself.    In addition, although each B-Vitamin performs critical functions in isolation they also work together to optimize many functions so taking a complete B-Vitamin Supplement is highly recommended.
    What are all the B-Vitamins?

    B- Vitamin          Active Form                                                    Inactive Form
    B-1                        Benfotiamine                                                Thiamine
    B-2                        Riboflavin-5-phophate                                 Flavin Monocleotide
    B-3                        Niacinamide                                                 NAD                                        
    B-5                        Panthothenic Acid                                         None                   
    B-6                        Pyridoxal-5-phospate                                    Pyridoxine Hydrochloride
    B-7                        Biotin                                                             None
    B-9                        Methyltetrahydrofolate  aka Metafolin         Folic Acid                                         
    B-12                      MethylCobalamin                                         Cobalamin
    Can you take too much of the B-Vitamins?
    For certain ones the answer is yes!  You should not take in more than 800mcg of folic acid supplement.  Too much can mask a condition called pernicious anemia.  Multiple Vitamins and B-Complex Supplements will contain 400 – 800mcg and more from diet is not a problem.
    For vitamin B-6 intake above 200mg per day is not recommended.  Again multiple vitamins and B-Complex will generally contain less than this amount and more from food is not an issue.
    Regular “Niacin” can cause significant skin flushing and itching, but this is harmless although it can be very uncomfortable.    Extremely high dose niacin can be used to treat high cholesterol levels but the regular form that causes flushing can also cause liver issues at high levels.   This is also true of “time-released” forms.     The best form for use for cholesterol is “Flush Free Niacin” aka Inositol Hexiniacinate as it will not cause these issues.   NAD (Nicotinomide Adenine Nucleotide) is very safe but there is no reason to take more than 10mg per day.
    As always do not take any supplement when pregnant without consulting your registered health care professional.

    Tom Monaghan, founder of Dominos Pizza, and car collector had a lot of cars in his world

    The first Domino’s “Javelin” official delivery vehicle being delivered to Tom Monaghan in 1969.

    When Monaghan only had a few stores, he had red, white, and blue AMC Javelins for delivery cars.

    When he and his brother started out in pizza delivery, they had a beat up ’59 VW bug, and when his brother wanted out of the company/business/partnership… he got the car as a settlement

    His dad died when Tom was four, and his mom put the boys into foster homes that didn’t work out, then into a catholic nun orphanage. After 6 years she got her life together and thought she’d be able to care for her sons and found out, she wasn’t parent material, then committed the boys to juvie.

    In his teens, Monaghan had been a penniless car buff; then he joined the Marines, went into pizza after his discharge and dropping out of college, acquired a fleet of automobiles, including a handmade Bugatti Royale, the Type 41 1931 Bugatti Royale Berline De Voyage, and the Packard that conveyed F.D.R. to his second inauguration.

    Because he liked to fly, and get to meetings about franchisees faster, he bought a Gulfstream jet and a Sikorsky S-76 helicopter.

    He had at least 3 annual antique engine shows on Domino Farms, the event featured eighty-six exhibitors of steam and gas engines, related paraphernalia and other contraptions. Also featured were classic cars from the Domino’s Pizza collection, two steam launches including the Olde English ‘D’ owned by Domino’s and a steam powered boat called Steamer Telegraph, owned by the show’s chairman, Jim Monaghan.

     When his pizza franchises took off, he built a 244-car collection, bought the Detroit Tigers, and became the owner of the largest Frank Lloyd Wright collection in the world. He was worth 480 million.

    Eventually, he decided to sell everything. He got rid of his cars, yachts, planes, and baseball team, and in 1999, he sold Domino’s to Bain Capital.

    one of the cars in his collection was the Barris AMX 400

    another was a Model J Duesenberg he bought for a flat million

    http://www.hotrod.com/articles/ccrp-0705-amc-amx/
    http://mentalfloss.com/article/65604/11-facts-about-dominos-pizza-founder-tom-monaghan-30-minutes-or-less
    https://www.newyorker.com/magazine/2007/02/19/the-deliverer
    http://people.com/archive/tom-monaghan-vol-32-no-13/
    https://www.nytimes.com/1999/02/14/business/taking-the-gospel-to-the-rich.html
    https://www.hemmings.com/blog/2011/03/20/sia-flashback-million-dollar-duesy-harrahs-auctions-over-300-cars/
    https://www.farmcollector.com/steam-traction/dominos-farms-sponsors-third-annual-steam-engine-show

    My Travel Tips

    I started traveling as a consultant form April of 2002. I have now completed ten years of travel. For my assignments I travel both economy and business class and use a variety of airlines. To commemorate my ten years of traveling I have compiled some travel tips. They are aimed at reducing the stress of modern travel to enable you to have a pleasant journey with the minimal amount of discomfort and hassle.



    These are my top travel tips based on my travel experience since 2002 and the post 9/11 world. (E6K9HKXKPPNE)


    Clothes and shoes


    1. Do not wear a belt – this will help you to pass through security without having to go through the hassle of taking it off and putting it on. It also helps in blood circulation.


    2. Do not wear any items of clothing which contain metal buttons, clips, labels etc.


    3. Do not wear clothing with a lot of pockets – you can forget a coin or a key and will set off the metal detectors


    4. Do not wear tight clothes this will cut your blood circulation and make the journey uncomfortable.


    5. Don’t wear baggy clothes; wear comfortable cloths that are close to your body – lets face it you will be profiled no matter what they say; so wearing baggy clothes sets off alarm bells with the security personnel. They are more likely to pad down a person wearing baggy clothes as opposed to someone wearing well fitting clothes.


    6. Try to wear slippers or sandals, if you feel clod wear a pair of socks with the slippers or sandals. If you need to wear shoes wear thin sole shoes (without any metal fittings) with no shoelaces. This will either negate the need to take off your shoes or make it easy to take off and put on shoes


    7. Try to dress in the thinnest possible layers of clothes instead of wearing / carrying bulky heave jackets / coats so that you can remove or add depending on your level of comfort. Thin clothes weigh less take less space in your hand luggage / carry on luggage.


    Money and Travel Documents


    1. Do not carry any coins. If you must carry coins in a small transparent plastic bag and put the coins in a pocket of your carry on luggage.


    2. Always carry more than one currency: example if you travel via to London to USA carry British Sterling Pounds as well as Dollars.


    3. Try to pre pay for as many expenses as possible before departure. This helps to minimize the amount of money you need to carry, as well as be able to bargain to the maximum and not be made to decide on the spot about your travel options. Use the internet and always cross check and read reviews of restaurants, taxi service and other services you are likely to pay for in cash so that you don’t get taken for a ride.


    4. Carry globally accepted credit cards as a payment option and for emergencies.


    5. Always take travel insurance; you never know when you might fall sick or get injured.


    6. Always carry your passport, visa, travel insurance, hotel reservations, travel vouchers, invitation letters, letters of sponsorship etc in one safety pouch / folder. This way you don’t have to look for them in multiple places. Keep them safe and close to you.


    7. Never ever give the bag containing these documents to anyone (except your family or personal assistant / colleague).


    8. If you are using a VIP service to breeze through emigration and customs make sure that you have line of sight of the person at all times. Confidence tricksters pretending to be service providers will walk off with your belongings.


    Baggage


    1. First check the weather of your destination (12 hours before departure – weather forecasting gets better when nearer to the dates concerned.)


    2. Finalize your clothes 12 hours before you travel, based on above.


    3. Choose clothes that can be mixed and worn: Take white shirts / blouses which can be worn with any pants / skirts and jackets. Take a few different ties / scarf and accessories so that you look different but use the least number of clothes. I am a firm believer in the use of hotel laundry services. I prefer to get the items laundered at the hotel and avoid carrying your entire wardrobe with you when you travel. Make sure that you as well as the hotel has a clear understanding of the difference between dry cleaning and washing of clothing items.


    4. Try to use the minimum number of bags as possible.


    5. Golden rule is that: if you do not need an item during the journey / flight, then it goes in with the check in luggage. One of the benefits of the post 9/11 world is that the airline industries ability to track and link you baggage to you has improved tremendously. So you do not have to carry any back up clothes in your hand luggage just in case your luggage gets lost.


    6. If you do not have any check in luggage then you need to ask the question do I really need to carry the item or can I buy it at my destination and use it. Remember most consumables (Soap, Shampoo, Mouth wash etc) are similarly priced everywhere and most hotel now provide them in the room). It’s worth trying a new brand of an item to reduce the weight and hassle of taking them in 50 ML clear bottles etc.


    7. Have a good idea of your baggage allowance. Especially if you fly economy class; it may change from airline to airline. The rule of thumb is that if it is difficult for you to carry your check in baggage (Standard international size) it is probably over weight. An average person can easily handle 20Kg. Use this principle when standing in check in queues. Avoid standing in queues with people who have difficulty in handling their luggage. They will take longer to check in as they will have to pay for excess luggage or repack them.


    Loyalty Cards


    1. Try to get as many loyalty cards as you can. Before you embark on your journey have the relevant loyalty cards sorted out and keep them with your travel documents and put the rest in you carry on luggage. You never know when they may become handy.


    2. In my opinion the top benefits of loyalty cards are:


    a. Priority check in – the shorter the queue you need to stand in the less stressful it is to you.


    b. Excess baggage allowance – you never know when you might need it, especially if you travel with your wife / partner who will shop while you are attending to business.


    c. VIP services for priority emigration and customs clearance.


    d. Access to a lounge with free broadband internet connection


    I recommend you go for loyalty cards that provide at least one of these benefits and not bother with ones that just offer air miles for ticket discounts and free food.


    Hotels


    1. Where ever possible I recommend you insist on staying in an establishment with at least a 3 star classification. This should provide good enough comfort & facilities for a business traveler. However I have come across many hotels which are classified as 3 stars but are more like cattle sheds. If clients and budgets permit always stay at the highest class hotel in your destination.


    2. The main facilities you should be looking for when selecting a hotel are:


    a. Airport pick up and drop


    b. Free broadband internet access


    c. Complementary pressing of one set of clothes per day (shirt / blouse, trouser / skirt & Jacket) + shoe shine.


    d. Free copy of the local English newspaper – This is a helpful tool to get a feel of the local environment, best places to dine and entertainment information and of course to get an insight in to what’s happening around you.


    3. Always stay as close as possible to your customers / clients. This will reduce local travel time and getting stuck in local traffic, which you may not know about or will not be able to find out before arriving at your destination. Best is to stay within walking distance. By this you can avoid the need to haggle with taxi drivers every morning and evening if meter taxis are not available.


    4. I recommend you stay on B & B basis; this gives you a lot of flexibility to move around the city and meet the locals during meal times. This will also help you get a feel of the general business environment, mood of the people as well as get exposed to the local culture.


    Flights


    1. Always use major airlines where possible. The trend now is to go for budget airlines. I too subscribe to this philosophy but with a few considerations. They are:


    a. Safety – As with all one needs to be comfortable with the safety systems of the airline. Some budget airlines operate state of the art new aircraft, while others operate others which do not have a good safety record. So each of us need to make this choice for ourselves.


    b. Reliability – Other than Europe and North America budget airlines are not regulated in a way they are liable for delays and cancellations. Unless you have a very good insurance policy you may run the risk of having to incur the cost of delayed and cancelled flights, additional hotel and transfer costs. Budget airlines will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


    Major airlines will operate scheduled flights, and if for any reason they do cancel a flight they will look after the passengers better and try to route you to your destination with the minimum hassle.


    2. Try not to use domestic airlines. As much as possible try to get to and from your destination via an international flight. Changing to domestic airlines may be cheaper but you need to consider the following:


    a. How much time do you loose and is it worth. Most domestic flights operate at much lower altitudes and will fly at a lower speed. International flights will fly higher and faster and can provide you with considerable time savings.


    b. You may have to go through immigration in one airport and through customs in another airport. This may actually take a longer time.


    c. You will increase you total transit time (Time spent not flying) and for a business person time is money.


    d. You may need to move your luggage over long distances between domestic and international terminals.


    e. You may need to pay again for excess baggage


    f. Domestic airlines too will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


    g. Most domestic airlines operate very old aircraft which may have a bad safety record.


    Jet Lag


    1. Living in the destination time zone – From the time you start your journey try to do things such as taking meals and sleeping according to the destination time zone. This will give your body extra time to adjust to life in the new time zone. Most airlines try to do this using the cabin lights to mimic the time of day. Unfortunately only the modern aircraft have this feature.


    2. Drinking fluids. – You must be well hydrated 24 hour before the flight, So refrain from:


    a. Heavy exercises that make you loose water through excessive sweating


    b. Drinking too much alcohol the day before you travel.


    3. Reduce the build up of static electricity on your body and clothes. Once at your choice of accommodation at your destination find a wooden or cement / tile floor. Take off your shoes and socks and walk on the surface for a few minutes. The best solution is walking on grass however this may not be possible at your destination. However this may be an option for you on your return to your home.

    My Trip to Baticaloa

    On my way to Baticaloa, This was taken on the Polonnaruwa Habarana Road today (12/06/2011) @ 2.00 PM. Wow what a Jumbo!

    Chronic Illnesses and Diet part 3

    Visualization and Chronic Disease

    To the ten steps of the Body Clock Prescription, I’d suggest adding visualization, another powerful tool for controlling chronic disease. Life consists of moving forward into images. You get to the dry cleaners to pick up your laundry by making a mental picture of the journey and moving forward into that picture. No picture, no laundry. With visualization, you are going to create an inner picture in order to realize your intention, not just in the outside world of the dry cleaner but in the inside world of your immune system.

    The first step is to get the knack of meditation so that your mind and body are in a receptive posture for visualization. Let’s assume that you’ve learned to enter a meditative state; riding on the letter M, your mind can enter a new space within your consciousness. From here, you can take one step forward into your imagination and make a picture of what you want to accomplish in your body.

    The effectiveness of this approach was initially proven in an experiment conducted with doctors suffering from terminal or advanced cancer. They were shown accurate images of their own cancer cells and of their immune system cells and were asked to create a realistic visualization of the immune system cells attacking the cancer cells. Most of the doctors successfully curbed their cancer — not to the extent of actually curing it, but in most cases there was measurable improvement. Since then, numerous experiments have shown that a less accurate image of the enemy is just as effective.2

    Diet Start

    About twenty years ago I used to meet one evening every month with a group of other doctors, including Dr. Bernie Siegel, one of the pioneers of visualization. Bernie shared fascinating examples of the kinds of imagery cancer patients chose to promote healing of their illnesses. It seemed important that the image be accurate in its intent; it was disconcerting when patients chose wimpy defensive images that were the imaginary equivalent of trying to beat their cancer with a wet noodle. People who chose aggressive images did better; lions, tigers, sharks, polar bears and knights in shining armor do better work than a little girl gathering up cancer cells into snowballs and throwing them over the fence.

    But what’s a good image if you have chronic inflammatory disease? In this case, redness, heat, swelling and pain afflict some part of your body as it reacts to an enemy that the doctor hasn’t been able to discover or that has disappeared from the scene of the crime, leaving your immune system in a perpetual dither. You need a picture that is soothing but not self-defeating by way of quieting your immune reactions to the point of defenselessness. This is where a chemical or an abstract image may be more appropriate. By chemical image, I mean something along the lines of `Let’s put out the fire’. Remember that inflammation is an expression of your body’s fire burning out of control. Whether it is in the skin, the digestive tract, the lungs, the heart, the nose or the eyes or, for that matter, whether or not it is producing palpable heat, some kind of uncontrolled fire is at the bottom of a lot of chronic illness. Parkinson’s disease, for example, has been characterized as a fire in the brain. And the oxidative damage in the chemistry of autistic children constitutes a kind of fiery injury to their RNA and DNA.

    If you are going to employ visual imagery to quench the fire, then why not use pictures that are more effective than merely aiming a fire hose or throwing ice water at it? Instead, try mobilizing your body’s powerful natural resources for quenching the inflammation, calling on your body’s clouds to release rainwater on the brush fires of the prairie where the inflammation resides. This could be your intestine if you have colitis, your joints if you have arthritis, your skin if you have dermatitis, your lungs if you have bronchitis and so on. You can even get technical and make your raindrops into vitamin C, vitamin E, beta-carotene and other potent antioxidants. Communication between your meditating-visualizing brain and the resources of your body is more dynamic and more specific then you know.

    When Bernie Siegel began talking about people’s responsibility for their own health and healing in the face of serious illnesses such as cancer, people accused him of ‘blaming the victim’ by placing an unreasonable burden of guilt on the sick person. But you can’t really take control of your health without believing that your health is to some extent under your control. Even a person who has been a victim of some catastrophic accident must believe that he or she can exercise control over healing, to at least a small but critical degree, through the expression of intention in prayer or visualization or by the exercise of sheer willpower.

    For people with chronic illness, the lines of causation are more ambiguous than they are in an accident. However irrational it may be, all of us feel guilt for things that happen, like the ill-timed flareup of cold sores just before an important public appearance. Feeling guilty won’t get you anywhere, but feeling responsible is the key to taking charge. If you feel like you’re the passive victim of the event, you may miss a chance to engage your body’s resources for healing. Only by feeling that you can take responsibility for your own health will you be able to make the changes that are necessary for regaining that health in the face of chronic illness.

    Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

    I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

    After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

    I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
    To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

    Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

    [This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

    The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

    Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

    Battlefield Hardline: A Double XP Boost is Currently Active! [Notification]

    Just a quick post to notify those interested in Hardline that a Double XP Boost is Currently On! GOGOGO http://battlelog.battlefield.com/bfh/

    See You In The Game!

    Quick Tip: Heroes Of The Storm 2.0 – Where To Choose Skins, Mounts, Announcers And More [Interface Change]

    Yesterday, Heroes Of The Storm “Version 2.0” came out – and along with it a bunch of changes and additions, breathing some new air into Blizzard’s MOBA entry. I have been having fun playing it off and on, discovering the changes and new progression system. I am working on a First Impressions/Overview of ‘2.0’ – but before that, I wanted to quickly make a Tip about something I am seeing a lot in the General Chat in HOTS: people asking how to change the Announcers, Mounts, Skins and other new additions, as the new UI has changed things a bit…

    In 2.0, right away you will see that things have changed, as the Main Menus themselves have moved around and information is in different places. For example, the Shop link/text at the top of the screen is gone:

    Here is where the Skins, Mounts, Announcers, etc can be located now:

    The Loadout button (first one on the bottom, far left) has combined the “Heroes” and “Mounts” buttons and now holds all of the settings for the currently selected Hero. Here, you can choose the Skin, Mount, Announcer used and other new additions via the sections within the Loadout (you can even save Presets of combinations you like). 

    Here is a 60-second tutorial showing where it all is, in Heroes Of The Storm 2.0:




    That’s it for this Quick Tip – it was just something fast because I have seen it asked a lot in the General Chat lobby lately – have fun in Heroes 2.0!


    The Secret Knowledge of Fourth Graders

    As I was reminded in reading all of the June Currently’s, not everyone is on summer vacation yet. So for those of you who are not yet enjoying time off, I wanted to share a fun creative writing activity that works well for the end of the year.

    One of my favorite books to share with students is The Secret Knowledge of Grown-Ups by David Wisniewski.

    In this highly-entertaining book, Wisniewski takes several “rules” that children often hear — like “eat your vegetables” — and explains the real reason that rule exists. For example, we don’t eat our vegetables because they make us healthy. The real reason we eat them is to stop them from rising up and taking over the world! Or, we don’t brush our hair to help us look neat, we do it to stop the hair from growing back into our heads and crowding out our brains. The book is filled with hilarious examples and colorful illustrations that my students loved.

    I read excerpts from this book over the course of a couple days, and several of my students looked at it in their free-time. We then set out to write our own examples for a class book entitled “The Secret Knowledge of Fourth Graders.”

    Here are some of the “rules” students wrote about:

    • Why you need to read “Just Right Books”
    • Why we use number 2 pencils on tests
    • Why you can only check out 2 books from the library at a time
    • Why we take AR tests
    • Why it’s important not to be tardy
    • Why we return library books on time
    • Why we have homework
    • Why we use pencils instead of pens
    • Why we don’t bend the pages of a book
    • Why we stack chairs at the end of the day
    • Why we take standardized tests

    The creativity in the “real” reasons why we do these things was fantastic. Here’s an example from one of my students:

    We wrote our final drafts on our iPads in Pages using the Visual Report template. That helped tremendously with the formatting.

    I’m planning to share several of these examples with my students next year, and I will definitely do this activity again. My students enjoyed it so much that several of them were talking about making other “spin-off” books such as The Secret Knowledge of Minecraft Players or The Secret Knowledge of Readers. I’m sorry that I didn’t get to see how those turned out as well.

    If you’ve never read The Secret Knowledge of Grown-Ups, I highly recommend it. It’s great for sparking creative writing ideas, and it can provide a fun writing activity in the late stages of the year.

    What are some other school rules you can envision your students writing about? I’d love to hear your ideas in the comments!

    In Defense of Classroom Technology

    Usually when I talk to people about the fact that I teach in a 1:1 iPad classroom, they think that’s awesome. But now and again, I’ll run into someone who thinks handing a kid an iPad in school is an atrocity, and I feel like I have to defend the work that I’m passionate about. This happened to me recently at a social event when my attempts at small talk quickly turned into a debate about what we’re “doing to kids today.” The naysayers certainly exist, and this particular encounter made me pause to think about why I feel so strongly about this topic.

    Here are some of the reasons I feel it’s in the best interests of both students and teachers to maximize the use of classroom technology.

    My students explore constellations on their iPads.

    1. It teaches real-world problem solving skills.
    Being good at technology is largely a result of being willing to experiment and fail. I wasn’t born knowing everything there is to know about iPads or Evernote or Edmodo — I’ve learned by trying different things and seeing what worked and what didn’t. When I can’t figure it out on my own, I talk to others or look for the information I need online. Now I get to see these skills in my students. Whenever they need to troubleshoot something, they work together to find a solution. They don’t give up or think it’s impossible. In this high-tech world, these skills are going to be incredibly valuable.

    2. It facilitates better communication between home and school.
    If parents want to know what we’re doing in class each day, they can find all of our homework and activities on our class website. If they want to monitor grades or see what assignments are missing, they can look on Edmodo. If they want to know what their child’s behavior was like at school today, they can look on ClassDojo and get a report. If they want to know what their child sounded like reading a 4th grade leveled text at the beginning of the year compared to now at the end of the year, I can pull up the child’s audio recordings on Evernote. Technology makes it easier for parents to know what’s happening in school, and I’m happy about that.

    3. It makes students better writers.
    Without question, writing skills are incredibly important. When I think back on all of the essays I had to write in high school and college or the cover letters I wrote to get opportunities I have today, I know that my ability to write mattered. Technology makes students better writers for a variety of reasons:

    • It makes them more open to revising and publishing their work when they don’t have to handwrite the whole paper over again.
    • It teaches them typing skills that will make them more efficient at writing and therefore able to write more. 
    • It gives me more opportunities to give them feedback about their writing because I can easily collect samples at various points. I can have them turn in a copy of a draft wherever they’re at without interrupting their work because I don’t have to collect a notebook. 
    4. It keeps kids engaged.
    I used to have students write book reports. Now I have them write book blogs on KidBlog and make book trailers using iMovie. It’s basically the same assignment, but now students are motivated and engaged to complete it. They have an audience of their peers that makes their work more authentic, and it’s something that can’t be easily replicated without technology. The effort and outcomes my students experience because of technology is something that should be encouraged.

    5. It benefits all types of learners.
    I think a lot of the criticisms of technology assume that students are being passive consumers of it — watching videos or playing video games all of the time. Without question, technology could be used as a high-tech babysitter, but that’s not how it’s being used in my classroom at all. When my students use their iPads, they are active and interactive, and they’re expressing their creativity in so many ways now. They’re making movies, writing stories and articles, becoming budding photographers, and interacting with the world and each other in new and exciting ways.  They’re still collaborating and developing the interactive social skills necessary to be productive citizens of society.

    6. It keeps everyone more organized.
    I can’t begin to describe how many minutes I’ve lost over the last 6 years because students couldn’t find a paper or a notebook. Then once it was turned in, I’d have to shuffle through piles of nearly 30 to find what I was looking for. Add to that the fact that students work at different rates and finish tasks at different times, and you have the potential for an organizational nightmare.

    I’m a pretty organized person, but without any hesitation I can say that technology has made my students and me substantially more organized. Everything we need can be found on an iPad or a computer. There isn’t instructional time lost finding materials or planning time lost figuring out where I filed that lesson idea or who is missing work. It’s all in one spot.

    7. It allows me to give better feedback.
    My students recently took a multiple choice test on Edmodo. I’d entered the correct answers before giving the test, so when I went to look at the results, it was already graded for me. Rather than spending time rifling through a pile of papers to mark answers right or wrong, I was able to type specific feedback to the students. For example, when several students missed question #6, I typed 2 sentences explaining the problem with the answer choice they selected and why the other choice was better. With the help of copy and paste, I was able to give that feedback to all applicable students in less than 5 minutes. How often do you think I could accomplish that in a world where I had to handwrite the comment 15+ times? It wouldn’t happen. I wish it could, but it’s not feasible.

    8. It gives me more information so I can help students.
    I routinely ask my students to solve math problems and explain their thinking. Sometimes they have to explain it in words and sentences, but other times I let them use their iPads to make short (30-60 second) videos narrating their solutions and the steps they took. Similarly, when I do reading assessments with students, I can use my iPad to record the student’s voice as the student reads. This creates an artifact that I can listen to, share with parents or RTI committees, and analyze in a way that wouldn’t be possible absent technology. It’s some of the best evidence of a student’s ability, and it helps me identify strengths and weaknesses so I can give students the support they need.

    9. It makes me more efficient.
    Anyone who’s a teacher can attest that this job sometimes borders on impossible. Teachers take on so many roles and have so many responsibilities that the stress can be overwhelming. I think that’s a major factor in why so many great teachers leave this profession within the first few years and why many capable individuals are deterred from entering the field. In my experience, technology has made this all more bearable. I don’t have to waste time shuffling through paper or hunting for files anymore. I don’t have to haul carts — literally carts — of student work and planning materials home anymore. I can find exactly what I need wherever I’m at because everything is electronic. It’s made me much more productive and efficient, and everyone benefits as a result.

    10. It’s appropriate for the world we live in.
    I know a lot of people lament the fact that we’ve moved into an age of technology. I’m not one of them, but even if I were, I recognize that there’s no going back now. I’d rather introduce students to technology in safe, structured ways where I can guide them through the perils and pitfalls than leave them to struggle on their own. I also like that I can show them how to make technology work effectively for them. I’m facilitating students to be productive, creative, and responsible users of technology, and I’m not confident they’d all get there on their own.

    It’s not technology that’s an issue — it’s how the technology is being used. I’m certain that the ways my fourth graders use their iPads will make them better informed, more capable citizens down the road. Is it the only way to teach them? Absolutely not, but the advantages of using technology in the classroom far outweigh any disadvantages the devices bring.

    What are the arguments for or against using technology in the classroom that you’ve heard? I’d love to hear your thoughts in the comments.

    INSPIRING DESIGN DETAILS LOOKOUT HOUSE

    Inspiring Design Details

    Inspiring Design Details

    The project is located atop a hill in Fairfield County, Connecticut, and has stunning views of distant Long Island. Depending on the shape of the original designers of the pyramid house, centered on the height of an open plan double lounge around an indoor pool, has been simplified and facilitated through a range of modern materials (including bamboo, stone blue tiles and glass) and a new lighting program. A glass bridge “architecture synapse“, which clearly distinguishes old from new connects the main house for the master suite.

    As the original structure, the new suite contains a large volume a little, in this case, a cube on foot, finished Claro walnut that divides the rest areas and bathrooms. billiard room “in the first photo is the most spectacular part of the house, offering an ideal place for socializing and relaxation. And as you can below, a resident has another pot, this time integrated nature

    Inspiring Design Details Rest Room

    Inspiring Design Details Rest Room

    Inspiring Design Details Dining Room

    Inspiring Design Details Dining Room

    Inspiring Design Details Kitchen

    Inspiring Design Details Kitchen

    Inspiring Design Details Bedroom

    Inspiring Design Details Bedroom

    Teenager’s Room Rockstar Design For Real RockStar

    Design of this room is reserved for your child who likes to play music and have a dream to be a rockstar. where in this room like rockstar there are some tools to play music, like a music studio in the bedroom. with a very attractive color design coupled with music playing equipment such as guitar, drums and other. expected to design the rooms in such a way to make your child feel more comfortable at home and hone his ability in terms of playing music

    Teenager’s Room Rockstar or Musician Themed

    Teenager’s Room Rockstar or Musician Themed

    Teenager’s Room Rockstar Design For Real RockStar

    Teenager’s Room Rockstar Design For Real RockStar

    Teenager’s Room Rockstar or Musician Design

    Teenager’s Room Rockstar or Musician Design

    Why you will lose false fat

    Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

    `I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

    Diet Start

    `It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

    That’s why you feel it in your midsection right away.’

    `If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

    `Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

    Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

    `People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

    `Now that my metabolism has slowed down, I’ve got to.’

    `I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

    `I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

    Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

    `No.’

    I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

    I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

    As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

    Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

    If you’re going to make changes in your life, you deserve to know exactly what’s going on.

    I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

    How To Use The Mouse To The Best Of Your Ability (a.k.a. How To Be A Better ‘First Person Shooter’) [Text-Only]


    [Text-Only – This Post is Text-Only Mode, for now. I may return to this posting and add Screenshots or Images at a later time.]

    I was browsing around in the Steam Forums [forii?], where I like to try and answer Technical Questions and give Suggestions about Gameplay and Tips – and I recently answered a query someone had about using the Mouse in Fallout 4 (arguably a ‘Shooter’ game for the most part) and how it seemed difficult for them to aim in the game (it is possible to utilize an Automated Aiming capability called V.A.T.S., in Fallout 4 – but the game can also be played ‘in real time’ without it, playing as a First Person Shooter would be played, similar to games like Overwatch, Counter Strike: Global Offensive, Battlefield, and more).

    So, I answered with a somewhat-lengthy reply, trying to be helpful and informative, letting them know where to do things like change the Settings of the Mouse and the Sensitivity; really trying to show them that there needs to be a ‘personalization’ of the Mouse Settings, if they wanted to utilize the Mouse, as a gaming tool, to the best of their ability (to “let your ability shine through the Mouse” as it were).

    I thought it might be nice to share my answer here too, then – to share with others that may be wondering things like:

    “Why am I having so much trouble aiming/killing in <game name>?”

    “Why does it seem so hard to kill people <in a Multiplayer game>?”

    “How can I improve my gameplay in Multiplayer/Player-Versus-Player?”

    …and similar questions.

    Thus, here was my reply in the Forum… Perhaps it can be of some use to you:

    —–

    If I may pop in, as a ‘First Person Shooter’ since Wolfenstein 3D (1992), and having won some Local Tournaments in the past (UT99 and Quake III Arena); you really need to find your own personal ‘mouse sensitivity’…

    (I used to do 180’s while running to ‘check my six’ or headshot the player behind me – which they didn’t like of course, heh)

    Note that this must be adjusted for every new mouse and potentially every new game. This is the only way to truly have a movement and reaction time/rate in the game that you personally feel comfortable with.


    There are a few places you must adjust it:

    – in Windows (Settings>Devices>Mouse [for Windows 10])
    – in Mouse Software (that disc that comes with the Mouse that everyone ignores, or the manufacturer’s Drivers and associated ‘Software Configurator’ of some type for the mouse from their website), where you can also Keybind different keys or combinations to your Mouse, if it can do so, and set DPI gradations/steps.
    – in the Game (Options or Settings)


    Again, I cannot helpfully stress this enough; try to do this for each and every game you play – it is amazing in how it can personalize your comfortable movement/scan/hit rate.
    It is really possible to ‘hit anything’ in a game, if you make your own personalized changes to all of the above.


    Some people like to move their mouse a lot, slowing down the movement into smaller gradations for sniping and tight movements.
    Some people like to move their mouse very little, using mostly their fingers and hardly turning their wrist (these types usually switch DPI settings as-they-move, for sniping and tighter movements).

    Both are arguable for usage and both can utilize the DPI settings/changes possible on modern mice.
    You must find your own movement type and movement rate, set by those three locations previously stated.

    Once you set the mouse how you like it – whether you switch DPI settings on-the-fly (to make your character scan slower or faster, switching between scoped and non-scoped, for example) or whether you keep one DPI setting and alter how fast you move the mouse – you will find that you can aim/scan/hit a lot better (and also not get tired as fast).

    Tip: Don’t forget to turn off any Mouse Acceleration (The kind that moves your mouse pointer farther on the screen if you move the same amount of space on your desk, only faster)… This only adds to the difficulty in scanning/aiming and makes it harder to build up muscle memory for your mouse (such as, “I move my mouse this far, and my view onscreen moves this far”).

    The only recourse, other than doing the above and taking all of the above steps, is V.A.T.S….(at least, to be totally comfortable and ‘reach your full potential’ with the Mouse (wow this is starting to sound like an Infomercial, sorry about that haha))

    But, try to have fun exploring it – find “You” in your mouse movements – and have fun learning how “You” play!

    —–
    Note, Dear Reader, that I am not trying to ‘be pompous’ or ‘brag’ here, with this posting… I merely stated my ‘qualifications’ at the beginning, to show that I learned a lot over time and that I had personally found some effective ways to improve playing, with the Mouse (especially in the past). 
    I do not wish to sound like to ‘know everything’ as well – and indeed can learn more – I just wanted to share what I did learn over time and hope that this might help others out, too. If you are an experienced FPS player (‘First Person Shooter gamer’), then you no doubt already know most of these concepts (or have figured them out on your own). 
    I should state that I am also nowhere near as good as I once was [being 40 now, alas, age occurs to all..]. Where I once could out-shoot almost anyone, regularly doing 180s-to-instant-headshots (as stated previously), I now regularly get my butt handed to me in games like Overwatch, CS:GO and the Battlefield series of games [although I can still get Top Spot on The Board at times! heh]. 
    Still, I wanted to try to help others… and I hope that this posting helps anyone improve their mousing (and killing/winning), if that is what they desire to do. 
    I always like helping others and teaching others what I can… “The wiser mind mourns less for what age takes away than what it leaves behind.” ~ William Wordsworth (1770-1850)

    SYITG

    Foam Rolling aka Self Myo-Fascial Release

    Using a tubular foam roller to literally roll over tight areas of muscles and tendons is known as “Myo-Fascial Release”.    While it seems counter-intuitive applying steady pressure to muscles and tendons with an emphasis on trigger points (areas of tightness and soreness) has been proven to be a highly effective method for improving mobility.    
    Since you are in complete control of the amount of pressure applied and how long it is applied you can customize the experience based on your level of sensitivity.   Key areas to focus on include the hamstrings, calves, gluteal muscles, latissimus dorsi muscle, and even low back and hip flexors if done with caution.
    You can use a tubular foam roller, and they are made in varying levels of firmness from soft to very firm.   In addition, there are variations that include a textured surface of varying levels from small to large finger like projections.  You can also use balls such as a lacrosse ball, baseball, or tennis ball in a similar fashion.     NOTE:  the smaller and firmer the object the more pressure it will tend to apply so proceed cautiously.
    The technique is to position the foam roller on the floor (on a firm but not hard surface is best).  Then position the muscle/s you are targeting on top of the foam roller.     For example, for the calf sit on the floor with your target leg extended so that it is on top of the foam roller with the lowest portion of the calf on top of the roller.    
    Use your hands to lift your butt slightly off the floor to allow you to apply pressure down onto the foam roller.    Then literally roll forward slowly over the foam roller paying attention to any trigger points where you notice sensitivity or tightness.   
    When you find a sensitive area slowly roll back and forth on the spot until you feel it release.   With a little experimentation you will learn how much pressure and speed work best for your physiology. 
    Self Myo-Fascial Release/Foam Rolling is a great way to start a workout and does a great job of safely improving mobility before a workout and is also great to do between workouts.
    Contraindications to Foam Rolling
    Pregnancy – during pregnancy ligaments become lax and pressure anywhere on or near the abdomen is to be avoided at all costs so best to skip foam rolling when pregnant.
    Osteoporosis – soft bones and additional pressure are not a good combination so best to avoid foam rolling without a physician’s permission if you have moderate to severe osteoporosis.
    Intervertebral Disc Issues – anyone with disc problems in their spine should be cautious with foam rolling because pressure in the wrong areas can create problems so again get guidance from a medical professional if you have an disc issues in your spine.
    Inability to support bodyweight on arms or legs – foam rolling cannot be done safely if a person lacks the strength to support their bodyweight on their arms and/or legs.
    For a pictorial guide of various foam rolling exercises to target specific body parts click here:   https://www.pinterest.com/explore/foam-rolling/  

    Essential fats

    If you have been doggedly avoiding fat in an attempt to lose weight — this approach is WRONG. You need fats in your diet. Your brain consists mostly of fat, and your intelligence, heartbeat and muscular movements all depend on it. The only way in which your body can send electrical messages through living tissue is via your nerve cells and their connectors, which again are made of fat.

    The fact is that some fats (known as lipids) are essential. They act as the second energy reserve behind glycogen, providing most of their energy at around 70 per cent of maximum heart rate. Endurance athletes utilize fat as an energy source more than other sports people and this is why they tend to be lean.

    Fats are not just for energy, though. Their many other functions include insulating important organs, carrying fat-soluble vitamins and regulating hormone levels. If you’re a female athlete and you experience a loss of your periods, this may be due to extremely low body fat, for this plays a vital role in the activation of the female hormone oestrogen.

    Fats also contribute to health in many other ways — provided they are of the right kind. In an attempt to warn people about the risk of consuming toomuch fat, certain groups have created the impression that all fats are bad, but this simply is not true.

    Diet Start

    Are you eating the wrong fats?

    Many people in the Western world are getting 45 per cent of their calorific intake from fats, but these are junk fats that the body cannot use, so these people are just as fat-deficient as those on extremely low-fat regimes.

    THERE ARE TWO MAIN TYPES OF NATURAL FATS:

    1. Saturated fats come primarily from animal sources such as meat and dairy products, and from coconut and palm-kernel oil; they are solid at room temperature. They provide the body with a stored form of energy in fat cells.

    2. Unsaturated fats are found in vegetables, nuts, grains and seeds, and in fish and game; they are liquid at room temperature. They contain two fatty acids that are essential to life and, more importantly, that the body cannot produce itself. These are linoleic acid (omega-6) and linolenic acid (omega-3) From these two ‘essential fatty acids‘ your body can make all the other fatty acids it needs.

    Is it just a case of cutting out saturated fat?

    Saturated fat gets a bad press, and a diet too heavy in it has been closely linked to cardiovascular disease. However, there is another fat with an equal capacity to harm: hydrogenated fat.

    Hydrogenated fat is solid or semi-solid at room temperature (the best example being margarine). It is created when a liquid oil (such as corn oil) has hydrogen added to it, changing its chemical structure. This in turn can interfere with the metabolism of some essential fatty acids. Research has shown that the trans fats in hydrogenated fats can increase LDL (poor) cholesterol,decrease HDL (good) cholesterol and thus raise the risk of coronary heart disease. Hydrogenated fat is found in almost all processed foods, plus frozen convenience foods and deep-fried fast food. This is another good reason to say goodbye to junk food and hello to fresh produce.

    If you usually ingest high amounts of processed fats and use commercially altered oils for cooking, then you are certainly not getting the balance of fats that your body needs.

    Why don’t food manufacturers use healthier oils?

    Even though the food industry uses vegetable oils that contain a reasonable amount of omega-6 fatty acids, they avoid omega-3s because these are more susceptible to oxidization — in other words, they go rancid quickly and don’t have a long shelf life.

    Ironic, isn’t it? Food manufacturers quite happily promote food under the guise of lowering cholesterol and reducing heart disease, but they are ignoring one of the fats essential to health. So unless you are eating high amounts of fish, fish oils, leafy vegetables, nuts, unrefined olive oil, tofu or flaxseed oil, your ratio of omega-6 to omega-3 fats is probably screwed up, and this in turn will be screwing up your health.

    The current Western diet is much higher in omega-6 fatty acids than omega-3’s. Remember those healthy Palaeolithic people we were discussing earlier? They were eating equal amounts of both.

    How is this relevant to body weight?

    If you are eating a diet with a good balance of omega-6 and omega-3 fatty acids, this will affect your body in beneficial fat-burning ways:

    • Your metabolic rate will be increased, as will the metabolism of fats, so more stored fat will be burned for energy
    • Your cells’ sensitivity to insulin will be increased, so that it regulates blood- sugar levels more effectively
    • The ratio of insulin to glucagons will improve, which will unlock the fat- storage banks and again allow fat to be burned as energy
    • Natural appetite suppressants will kick in.

    So if you want to improve your chances of losing weight, you need to up your intake of omega-3 and other healthy fats.

    Essential fats Q&A

    Q. How often should I eat oily fish per week if I want to consume enough omega-3 fatty acids?

    A. You should aim to eat oily fish a minimum of 2-3 times per week, or ensure you use flaxseed oil regularly on salads to raise your levels. Try to eat fish from as safe a source as possible as many coldwater fish are contaminated with heavy metals and pesticides.

    Q. How can I avoid hydrogenated fat?

    A. Cut out processed food and only use cold-pressed un-refined oils such as olive oil, or coconut oil for cooking. Don’t eat fast food that has been deep-fried and avoid butter type spreads. If you did this, then you should be able to avoid consuming dangerous trans fatty acids.

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

    Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

    I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

    Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

    Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

    I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

    If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

    Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

    And click here to see my review of Chapter 2!

    Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

    Thanks for reading,

    And More: Deals and Sales – Black Friday Weekend 2013 Deals Are On Now


    I don’t usually talk about current sales/promotions on this site [or haven’t so far], but after seeing all of the sales on out there, I had to make a quick post just to say that there are some great deals on now! 

    Even if you don’t live in the United States (for instance, I’m in Canada [eh]) you can still take advantage of them, as most electronics and entertainment companies are on the Black Friday/Cyber Monday weekend bandwagon, with tons of purchases available online – and it’s all “nuthin’ but good” for gamers… Steam, Origin, Gamefly and other digital gaming distribution platforms are all chock full of great sales, as is Amazon, TigerDirect, MemoryExpress and other local and online hardware stores, allowing you to finally get that Upgrade you’ve been wanting, should you decide to jump on a deal out there.

    Some examples of games on sale are below; but whether you buy a few games this weekend or save your money and just play with the new influx of players in your own favourite online game – I hope you enjoy your weekend and have some fun:

    An example of the Black Friday Weekend Sales for 2013 on Steam

    A small example of the Black Friday Weekend Sales for 2013 on Origin

    An example of the Black Friday Weekend Sales for 2013 on Gamefly

    See You In The Games!

    My trip to Delhi and Hyderabad cont…………….

    Today I finished the 3rd Organizational Capacity Assessment (OCA). The first organization was The National Council of Applied Economic Research of India (www.ncaer.org). The second organization was the Indian Institute of Dalit Studies (www.dalitstudies.org.in). The third organization is the National Institute of Public Finance and Policy (www.nipfp.org.in).

    I must say that I have never met a group of such eminent people working passionately as I witnessed in the past 6 days. Most of the people I met for the OCA’s are individually academics of international standing. What struck me most was the passion and the objectivity of their work as well as the humility they show when compared to the major results they have achieved. I wish all not for profit organizations had such an ethos when it comes to measuring there results.

    I have to record the results of the interviews conducted over the last few days as soon as I can as I will be traveling to Hyderabad on the 1st. for the 4th OCA. Tomorrow is the only non working day in this assignment but I guess I will be doing the documentation. Hope I get a chance to finish early so that I can go out for the evening.

    The 1st of March is a holiday in India (festival of colours) and hope I don’t get splashed with coloured powder on the way to the airport.

    The trip to Hyderabad India

    I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

    I have applied for my visa nd waiting to collect it. will do it tomorrow.

    Beautiful Bed Room Design Sample

    Beautiful Bed Room DesignBeautiful Bed Room Design

    Beautiful Bed Room Design MinimalistBeautiful Bed Room Design Minimalist


    Beautiful Bed Room Design ElegantBeautiful Bed Room Design Elegant


    The hottest color of 2010 is Beautiful Bed Room Design which is a strong color that must be used as a complement with lighter tones so as to not overwhelm the space and to make it look classy and fun.In the pictures above you can see a beautiful turquoise interior starting with the chandelier and ending with pillows.It’s a good combination between turquoise and floral tapet from walls.

    How to Create a Lower Body Band Training System

    Resistance training bands provide a great strength curve that matches the lower body strength curves nicely.   Specifically, the more you stretch a band the higher the level of resistance you have to overcome.   In the case of the key lower body movements such as squats, deadlifts and lunges this matches the strength curve of these key movements meaning that the muscles are capable of producing the highest levels of force at the top of the movement when joints are extended and muscles in their shortest position.
    The trick is how to apply band resistance to these movements and other functional movements such as jumps.  While there are many different techniques for accomplishing it – one of the best is to create your own lower body band loading system using a large band as a belt and smaller band/s looped through it and onto your feet to create load from the hips down.

    This system puts no load on the spine,  and it is easy to increase or decrease load based on band sizes used and number of times you wrap the band around your feet.
    It travels with you as you move for extra load for all lower body movements including squats, lunges, and deadlifts.    It is also a portable jump training system that is easy to create, and for facilities with the reACT Trainer it is a fantastic way to create additional overload on the reACT Trainer while keep the hands free!

    Click here to see step by step instructions for how to use bands for this set-up:   https://www.youtube.com/watch?v=zkAMGtjkVm4

    It’s Not Just You™ – The Elder Scrolls: Legends A.I. Seems Pretty Hard To Beat Now [Noticed]

    Just a little notification that, if you are playing TES:Legends recently and find it’s quite a bit harder to beat the computer opponent (AI/NPC)… It’s Not Just You™

    I was in the Beta for The Elder Scrolls: Legends; but never got around to finishing my “First Impressions” article on it [as is how it usually goes for me and posting, heh]. Legends has been out of Beta for a few months now, and if I could summarize the game in one paragraph, I would say that Legends is a Virtual Collectible Card style game, that is ‘both Single-Player and Multiplayer’ (you can play against other human opponents, in matches and “Arena” rounds – but you don’t have to, you can entirely play against the computer AI both in single matches and in ‘Arena playoffs’, if you desire). It is actually more of a “Card Collecting” game than a “Trading Card” game – as I have not seen a way to trade with human players yet – but that is similar to other ‘virtual card games’ of this genre, like Hearthstone and Gwent (“World Of Warcraft” Lore and “Witcher” Lore -based virtual card games, respectively). The game cannot be played Offline and you don’t actually get any ‘Real Life’ Cards of any form; but that again, is the same for the other virtual card games mentioned.

    After playing a little bit when it was first Released, I didn’t play Legends for a few months, only recently picking it up again to play a bit – and boy was I in for a surprise!

    The computer AI as it is now, offensive and ticked off
    (Cropped Screenshot of art by Bethesda Game Studios)

    Perusing the Updates for the game (which there seems to be one of every few weeks, a nice thing to see for a game!) – there was an Expansion for the game released at the end of June 2017 (Heroes of Skyrim) – but nothing that says, “We felt the AI was a little too easy to beat, so we beefed it up a bunch and it also will pull cards out of it’s butt hat, getting exactly what it needs at times, to win!” – so I’m not sure when this AI change occurred… [I didn’t play for a good few months or more, so sometime around mid-2017, I reckon].

    Judging by the recent changes to the Computer Opponent A.I., get used to seeing this screen more often…

    Legends is a fun game still, with it’s flashy effects and nice sounds, not to mention the wonderful Elder Scrolls-style ‘realistic’ art on everything; I personally don’t mind if I am going to be losing to the Computer a lot more; but it would have been nice to see a more obvious notification of it somewhere – or a way to perhaps adjust it (via a Slider or Dial or anything..).

    I do think the AI was ‘just a little too easy’ at first, making simple moves and not many combos, losing a lot more than it won against me – but now it seems pretty darn hard – almost too hard, pulling multi-combos everywhere and buffing cards a lot more and getting ‘the perfect card’ or ‘just what it needs’ at times, to pull off a win (as though, instead of the AI having a prepared set of cards, cards seem now ‘generated as the game goes’, to “keep it competitive”). I can still win once in a while against the AI in Solo Play and Solo Arenas – and I understand that Bethesda might want to make things ‘a bit difficult’ to encourage selling Card Packs; but… Dearest Beth: It’s “Just A Little Too Much” Now… [in my opinion]

    The ‘new’ Computer Opponent A.I. at work, busy buffing its’ cards to no end

    I won’t stop playing, of course – and I won’t stop getting Card Packs once in a while (for all three of the Collectible Card Games mentioned above, when I can) – but I just wanted to mention this, for others too; that if you noticed the Computer seemed ‘tweaked’ lately and is now pretty darn hard to beat as an Opponent in Legends – It’s Not Just You™…

    If I play some Versus matches, which I do from time to time – See You In The Game!

    Addendum
    Changes Seen:
    – Increased Combination plays (Buffs, Debuffs, then Attacking)
    – Increased Healing cards (Health added to Opponent)
    – Highly Increased ‘instant-kill’ or ‘unsummon’ type “Destroy A Creature” cards (Piercing Javelin, Lighting Strike, Execute, Cast Out, etc)
    etc.

    The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

    Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
    Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
    Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
    However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
    The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
    Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
    When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
    How Shoes May be Impacting Your Health
    Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
    Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
    The Health Benefits of Grounding
    Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
    Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
    Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
    All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
    So have some fun, kick your shoes off and get back to nature!
    How to get the benefits of Grounding
    Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
    For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

    good representation of the concepts

    a friendly stopped by to say hello, at 5000 feet

    The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

    How to Organize your Summer Reading

    Summer is the perfect time for me to make some progress on the massive stack of books that I accumulate throughout the year. You know that stack — and if you’re like me, that stack may have spawned offspring and multiplied into several stacks around the house. And given the number of summer book studies I keep reading about, I know the stack will continue to grow. Like last week, when I saw that Misty was going to read Number Talks, and I had to get the book.

    Or this morning, when I read that Beth at Thinking of Teaching and Brenda at Primary Inspired are hosting a summer book study of Building Mathematical Comprehension: Using Literacy Strategies to Make Meaning by Laney Simmons. I want to read that, too!

    With all that I’m currently reading, want to read, and have finished reading, I needed a way to keep track of all these awesome books. Then I remembered GoodReads (this is very distinct from the GoodReader app that I’ve blogged about before).

    GoodReads is a social media site focused on reading. I first started using it in 2010 after I finished reading The Book Whisperer by Donalyn Miller (if you haven’t read this book, it is a must-read).

    She referenced the site in the book, and I used it through my computer for quite a while. Eventually, as I got busier, I started using it less. I recently got an email update about a friend who was using it, however, and it reminded me that I should revisit the site. My how GoodReads has improved since I used it last! First, GoodReads has mobile apps now to help you keep your reading interests up-to-date.

    Now, I’m not such a bibliophile that I need to give status updates of what I’m reading non-stop. But these mobile apps have a fabulous feature that I love: a scanner. (Here’s the view of the app from my iPad. The iPhone version is very similar.)

    The scanner allows you to scan the barcode on books and then add it to a virtual shelf. Your GoodReads account has 3 default shelves: read, currently reading, and to-read. Shelves are like tags, and you can create your own shelves based on topics or any other organization you’d like. Books can also be housed on multiple shelves at once.

    I love using the scan feature to quickly organize the books that I’m reading or plan to read. Given the iPhone app, it’s also a dangerous helpful feature when I go to bookstores and see books that I’d like to read someday. I just scan them in, and it pulls all sorts of data for me about reviews of the book, average rating of the book, page count, etc. For eBooks I’ve purchased that don’t have a scannable barcode, I can also search by title or author.

    In addition to using this to manage my summer reading, I expect to use this app more in my classroom library to inventory my collection, identify books that I’ve read or want to read, write recommendations for my students, and so on.

    If you decide to give GoodReads a try, feel free to connect with me there. I’d love to connect with other teachers to see what others are reading.

    What are some books that you’re planning to read this summer? Any other ideas for ways to use this app? I’d love to hear your ideas in the comments section, and I hope to connect with you on GoodReads!

    Happy summer reading!

    Peanut Benefits for Health

    PEANUT BENEFITS FOR HEALTH

    Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
    Peanut Benefits For Health - 1
    Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
    Peanut Benefits for Health
    1. Helps To Increase Fertility
    For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
    2. It Can Prevent Painful Gallstones
    During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
    Peanut Benefits For Health
    3. Can Help Reduce Depression And Stress
    Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
    4. Can Improve Memory
    The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
    5. Lowers Bad Cholesterol
    Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

    Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

    Who needs to curb the carbs?

    It goes without saying that everyone should consider cutting out refined sugar and flour products, plus high levels of processed foods that are full of junk fats, as they are nutritionally redundant in the human body. You should also consider giving up caffeine and moderating your alcohol intake, particularly if you suffer from any of the symptoms of unstable blood sugar and insulin resistance.

    Many people are not even aware of the symptoms of eating too many refined and dense carbohydrates. They have become used to living in what I call ‘the discomfort zone’. They have forgotten what it is like to wake up full of energy, think it’s normal to feel bloated after meals and rely too heavily on stimulants such as coffee to get themselves through the day.

    Diet Start

    This sorry state of affairs becomes their normal state of being — it is no wonder that the symptoms of degenerative disease creep up on many people un-noticed. They are so used to living below their physical potential that they don’t recognise the signs until it is sometimes too late.

    If you are more genetically disposed to gain weight readily when exposed to an unhealthy diet and lifestyle then restricting the amount and type of carbohydrate foods that you eat may be the right choice for you. Such a diet regime may also suit you if you have developed insulin resistance as the result of a diet based on high levels of refined and complex carbohydrates that outweigh your energy requirements, plus too much saturated fat, with little fibre and water. Unless, that is, you are one of those people who leads an active lifestyle or has a high metabolic rate, and already eats a diet with relatively high levels of healthy complex carbohydrates (brown rice, potatoes, wholegrains and certain vegetables, fruit and pulses) without accompanying weight and health problems. If so, why are you reading this? Sounds like you are already doing what is right for your body.

    Modern Side Table Lamps Design

    If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

    If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
    Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

    Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
    Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
    Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

    5 Ways to Use iPads in Math

    Today I’m linking up with the Tune into Technology Linky to share some ways to integrate technology in Math. Since I teach in a 1:1 iPad fourth grade classroom, I’ll focus on how we use iPads in Math.

    1. Build a Math Notebook in Evernote



    Evernote is my all-time favorite note-taking app, and that extends to math as well. In addition to typing text notes, students can attach documents (handouts, activities, etc) that they’ve viewed on their iPads and they can also take pictures through the app or attach pictures from the camera roll. That’s helpful when they build models with manipulatives and want to archive their work.

    2. Reinforce concepts or conduct inquiry research with math movies.

    BrainPop
    Khan Academy



    Two of my favorite apps to use in math are BrainPop and Khan Academy. I often use these to introduce a lesson or to differentiate instruction. I often feel like I get stretched pretty thin during math instruction because I have such a range of skills in my classroom, but these apps help. If I’m working with a student and a second student needs help, I can direct that student to a video on Khan Academy and encourage the student to see if that will help him or her figure out the problem until I can get there. Often the additional examples help the student understand the problem better.

    3. Make math movies to assess understanding

    Show Me

    Explain Everything

    I often ask students to show their solution to a problem on an app like Show Me or Explain Everything. There they can model their thinking using pictures or drawings, and they can record their voice as they explain their work. I learn so much about their understandings through their explanations, and it helps to assess the Standards for Mathematical Practice included in the Common Core.

    4. Make a Vocabulary Notebook in Keynote

    Keynote


    I like to use Keynote for their math vocabulary because we can create slides that use the Frayer Model for vocabulary instruction. In addition to typing definitions, examples, and non-examples, they can draw their own pictures on a whiteboard app, take a screenshot, and add them to the slide. They can also search for real-world examples to photograph and add. Once they’re finished, they can easily alphabetize their entries by rearranging the slides.

    5. Use QR codes
    Our math word wall has QR codes linking to the definitions of each term so students can quiz themselves about the meaning of a term or review terms they’ve forgotten. If you click on the image below, you can get a freebie example of this for the properties of multiplication.

    My complete sets for grade 4, grade 5, and 4/5 combo are available at my TpT store.

    We’ve also written riddles in Geometry where students could scan a QR code to find the answer. You can read my post about that here.

    And we’ve used QR codes to help check homework assignments. I’ve written about that here.

    I’m really just scratching the surface here — there are so many other possibilities and several math specific apps to use, but I’ll save those for future posts. I’m excited to read other examples of integrating technology into math, though, and if you haven’t visited the linky yet, you definitely should. I got so many great ideas for reading and writing from it last week!

    How do you use technology in Math?

    Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

    Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

    Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

    Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
    Recorded with:  Bandicam (Registered Version) @ 1080p
    Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

    This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
    [On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

    I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

    At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

    See you in the games!

    Now on Instagram!

    I’ve joined in the Instagram love! You can now find me at Eberopolis on Instagram.


    I started using it on Wednesday, so I’m still new, but I’m making it a goal to post something (usually) classroom-related every day. Be sure to follow me so I can find all of my teacher-friends who are already there!

    Have a great weekend!

    Reminder: Diablo II – 2014 Ladder Reset is May 27th

    That’s right, this is just a quick reminder that tomorrow is the Diablo 2 Ladder Reset for 2014!
    So get ready – stock up on energy drink and tell your friends you won’t see them much for the next while – and get on that Ladder! Have fun playing, my wonderful readers – and enjoy being on the Top Of The Heap
    (at least until the botters get going)
    See You In The Games!

    Paperless Mission #11: Getting Started with Edmodo

    This is the eleventh installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #11: Get Started with Edmodo

    One of the tools that I started using in the classroom this year is Edmodo. If you’re not familiar with it, Edmodo is a learning management system that allows students and teachers to interact online in safe environment. It looks and feels a lot like Facebook but without all of the potential problems Facebook could create — especially for very young users.

    1. Create a teacher account and create your group for your class.
    Teacher accounts are free, and they’re the first step toward using this in your classroom. Parents and students aren’t able to access Edmodo unless they know the access code that a teacher has given them.

    2. Add some content for your students to engage with the first time they use Edmodo. You can ask a question for discussion or take a poll as a good first activity. You’ll want to have something queued to go so that students don’t just start posting randomness. (They may do that anyway at first, but you can at least buy yourself some time to talk about guidelines and procedures for that before they get too carried away.)

    3. Invite students by giving them the Group Code. This is unique to your group, and students will need an access code for each group they join with their student account. Joining your group doesn’t give them the power to search for other groups. Similarly, if another teacher at your school is using Edmodo, he or she will also have a Group Code that students can enter and just add the group to their account. It’s pretty easy.

    4. Once all of your students have joined the group, lock your group. This will prevent other students from other classes inadvertently joining, and it’s generally a good security measure. You can always unlock the group temporarily later on if you end up getting a new student.

    5. Create an assignment. This essentially creates a place for students to turn in their work. Everything that they complete on their iPads gets turned in through the assignments I create on Edmodo. Then I can see which students have turned it in, assign grades, and give feedback. The beauty of this system is that I can grade work as it comes in without worrying about losing something. This is especially helpful on larger assignments where students tend to stagger their completion.

    6. Give quizzes. I won’t lie — this is probably one of the most tedious parts about Edmodo from a teaching perspective. You have to manually input all of the questions, and there’s currently not a way for teachers to share their quizzes with one another. But the time you put in on the front end of creating the test is more than made up for on the back end by the immediate grading of the multiple choice, true false, and matching questions. I’ll talk more about Edmodo quizzes in a future post.

    7. Set up small groups. You can create multiple small groups within your group, and students can belong to more than one small group. That means that you can have small groups for reading as well as different small groups for research projects in Social Studies, etc.

    Preparing Students

    My students really did see this as Facebook-lite, so it was important that we created some guidelines as a group. Here are some of the rules we discussed and implemented as a class:
    • Use posts to discuss school-related content only — not to share personal information or “status updates.”
    • Use appropriate school language and grammar, not texting language.
    • Be positive and kind and show good “Netiquette.”
    My fabulous media specialist, Sandi at Teacher Technotopia, did a series of lessons with students about “Netiquette” prior to this, which helped a lot. I also moderated the conversations a lot at the beginning. As the teacher, you can delete things that other students post and you can send that student a direct message to let them know that you deleted their post and why you did so. That helped with my class tremendously.  
    As a side-note, one of the things I like about Edmodo is that you can send your students direct messages, and they can send you messages, too, but they can’t send direct messages to each other. Anything they post is either public within the group or for the teacher-only. This eliminated some of my concerns about possible cyber-bullying.

    How I Used This in My Classroom

    Once we got going with Edmodo, I used it constantly. Virtually every test (except math) was done through Edmodo. It was also great for collecting student work, taking polls, and facilitating class discussions. For example, when we were deciding what our class team name would be for field day, I was able to relegate that entire conversation to Edmodo rather than take up valuable class time on it. I also love that students can access Edmodo from any computer or mobile device, so they could keep going on assignments even if they couldn’t take their iPads home. It’s not a perfect platform, but it was really helpful in my move toward a paperless classroom.

    Do you use Edmodo in your classroom? I’d love to hear your thoughts about it in the comments section!

    MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

    Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

    LIVING ROOM LAYOUTZ FROM HÜLSTA

    LIVING ROOM LAYOUTZ FROM HÜLSTA

    MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

    MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

    LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

    LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

    LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

    LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

    July Currently & Goals & a Meet Up!

    Oh, July! You seemed so far away a month ago. How could you possibly be almost here already?! Can’t we add another month in between June and July? I really, REALLY want to hold on to June as long as possible. I’m really not ready to return to work in a few weeks…

    Currently July

    I’m linking up with Farley at Oh Boy! 4th Grade for the July Currently.

    Listening: My little girl is almost 2, and she LOVES books. She also loves Pete the Cat. I took her to my favorite children’s book store, Little Shop of Stories, to get the new Pete the Cat book the day it came out. Given that she knows and loves the song “Wheels on the Bus,” it’s a great book for her to “read” on her own.

    Loving: Planbook.com. I signed up for the one-month trial to tinker around with it, and it’s fantastic. I’ll definitely be using it next year.

    Thinking: that I’m much more prepared to teach the Common Core this year — especially with math. I’m excited about implementing all of the things that I worked on this summer to get ready for math, and I’m optimistic about my year ahead.

    Wanting: a longer summer break. There are so many things that I still want to do before going back to school, and I don’t think I’m going to be able to get them all done.

    Needing: a maid. I can’t keep up with my husband, toddler, and two dogs. Once I go back to work, it may be time to hire someone to come in each week.

    Tips, Tricks & Hints: One thing that helps me with time management is to try to group all of my like-projects together and work on them at once. For example, I have one day a week at school that I do all of my copying (or at least I did before going paperless!). I also spend one day working on plans for each subject (e.g., a day for math planning, a day for science, etc.) and a day for working on blog posts, etc for the week. This helps me use my time more efficiently and stay relatively organized.

    July Goals

    I’m also linking up with Jess at I {Heart} Recess for the first time for the monthly goals post.

    Personal: I want to start exercising at least 3 times a week (baby steps). I return to work in a couple weeks (!), and I know with all that I’ll be juggling this year between work and my doctorate that I will need to do better with exercise for balance and stress management.

    Family: I want to squeeze in a couple more “date days” before going back to school. My daughter is in school year round, so on “date days,” my husband leaves his office before lunch, and then we go out to lunch and catch a movie before picking her up. It saves us babysitting costs, and it’s a fun way to spend our afternoon.

    Health: A few years ago when I lost a lot of weight, the biggest change I made was that I consistently drank 64 oz of water every day. Now that I’ve gained back the weight (and then some), I need to start drinking at least that much water every day.

    School: I report to our staff retreat on July 17th, and then pre-planning officially starts on July 25th. I need to figure out how I’m going to decorate my room before then and map out some plans for the first few weeks before then.

    Blog/TpT: I’m hoping to wrap up my Paperless Challenge series in the next few weeks, and I have several new TpT products in the works. This summer has just gone by too quickly for me to finish it all!

    Outside the Box: I want to find some easy and tasty breakfast and lunch recipes that I can use throughout the year. I do a fairly good job cooking healthy dinners, but I am not consistent the rest of the day. I often forget to eat breakfast, and then I don’t make the best choices for lunch either. The more I plan ahead, the better prepared I’ll be. And this justifies spending more time on Pinterest. Win-win!

    Southeastern Bloggers Meet Up!

    Have you heard about the Southeastern-area blogger meet up? It’s about time that those of us in Georgia and the surrounding areas get together, and I’m super thankful that Stacia, Amanda, and Jivey from Collaboration Cuties and Ideas by Jivey have  organized something for us. If you are close to Atlanta, I hope you’ll join us for the meet up on July 20th. It promises to be lots of fun.

    Click on any of the images below to connect with Jivey’s blog where you can RSVP.

    I hope to meet lots of other fabulous teacher bloggers there! Click the button below to RSVP.

    Sample Dining Room Minimalist Design Idea

    Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

    Sample Dining Room Elegant DesignSample Dining Room Elegant Design

    Sample Dining Room Classic DesignSample Dining Room Classic Design

    Sample Dining Room DesignSample Dining Room Design
    Sample Dining Room Elegant DesignSample Dining Room Elegant Design

    NYC INTERIOR DESIGN FIRMS STYLE

    NYC INTERIOR DESIGN FIRMS

    NYC Interior Design Firms Thomas Britt knows how to create a glamorous interior better than anyone, so when he promised to give “a sort of sense Adrian” an austere industrial building, he knew exactly what to do. Like Adrian, the legendary costume designer, knew glamorous is a quality difficult to achieve. To achieve this, Britt sought inspiration from its customers: a couple, both in the international financial world, and their adorable son.

    “My goal was to create a smart home NYC Interior Design Firms of the 21st century of a young international couple,” says Britt transform their building generic six-story ceiling in Tribeca in a family home. His plan, executed with Valentino associated Samsonadze was to create the illusion of architecture, where there was none, and stresses the unconventional combinations of colors, luxurious fabrics, mother of pearl and lacquered antiques and modern art (paired collect works of Indian and Pakistani artists, but also pieces of Americans, including Louise Nevelson and Sol LeWitt).

    Britt set a young voice in the lobby, the space on two floors, with steel stairs steep. “We needed to warm up to Hall and to make it more attractive,” says Britt, who has cleverly divided into individual zones (soft, floor to ceiling curtains dramatically tied back) in order to reduce its appearance. It has saturated the wall in red paint, then hang it on three “triumphantly scaled” diamond-glass mirrors your own design.

    You can also add a touch of light to the room. That no one can find a Louis XVI console painted lobby of a fossil old, put a couple of lamps ‘iceberg’ 1940 FRENCH plaster on it.

    A small back room in the rear portion of the first floor is equally joyous. Cozy the pupal stage, the room is dominated by a Diva like gold bed in an alcove and partially hidden by thick curtains turquoise. red pillows on the bed making it pop blue and gold. Small tables inlaid with mother of pearl to add an exotic touch. An Indian dhurries with blue, gold and red pulls together.

    As in many houses in the city, the main parts of the population are on the second floor. Britt treatment living room double height, is a huge expense. The palette is crisp set by the booty white curtains, 22 feet high huge red border. A high-level white towers of Murano glass chandelier in a white sofa, chairs and red carpet red and white barrel. “When you’re in this room, do not know what country you are,” said Britt NYC Interior Design Firms. “You can be anywhere. The decor is influenced by all the places I’ve been”.

    NYC INTERIOR DESIGN FIRMS
    NYC INTERIOR DESIGN FIRMS
    NYC INTERIOR DESIGN FIRMS

    Original Mexican Mazel Mex

    • 2.5 cups cold water
    • 1.25 cups cornmeal
    • Generous dash cayenne pepper and/or cinnamon
    • 2-3 Tbs. corn oil
    • 3 onions, peeled and coarsely chopped
    • 8 large tomatoes, coarsely chopped
    • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
    • 1-2 cloves garlic, peeled and minced
    • Diet Start
    • 1 Tbs. fresh cilantro, chopped and torn into leaves
    • 1 Tbs. fresh parsley, chopped

    Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

    Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

    YIELD: 2 servings.

    Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

    Hazel Enchiladas

    • 6-8 corn tortillas
    • 0.25 cup corn oil
    • 2 recipes Mazel Cheese Mexican
    • 1 recipe cooked Salsa Mazel
    • 1 recipe fresh Salsa Mazel

    Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

    VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

    VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

    VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

    YIELD: 2 servings.

    Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

    1960 Lincoln Continental mk 5 Formal Limousine

    in the above photo, lower left side, you can see the air conditioning vent under the grab bar

    and this cool control panel / radio for the passengers in the back seat to control the partition, radio, and air conditioning level

    and the AC takes up about a 1/3rd of the trunk space

    My trip to Yapahuwa

    I just completed an assignment for an international networked organization. They are in the process of establishing and sustaining a national level sister organization with district level branches which will belong to the same network.

    The assignment was to critically look at the activities undertaken to sustain the district level branches. Well basically looking at the resource mobilization of each branch.

    When considering resource mobilization for the development sector one automatically recalls the telethons and other fundraising activities done by charities to raise millions of dollars; quite similar to the ones that are going on for the Haiti earthquake relief operations.

    However resource mobilization in the 3rd world is quite a different matter. It is fundamentally handicapped due to the following reasons.

    1. Most INGOs and Local NGOs operate in the 3rd world as project implementers. Therefore their articles of association / constitutions do not provide for resource mobilization (self generated / self raised funds).
    2. Due to above most states (in Asia) do not recognize them as registered charities that qualify for fund raising which is tax exempt.
    3. They are only allowed to receive funds from donors who already have funds or who have access to funds. Generally these funds when received in the implementing country are exempted from income tax.
    4. In fact, the local legislations which facilitate the registration of these entities for legal purposes themselves disallow any kind of activity which earns an income for the organization.

    So, in order for an organization (NGO) to be legally able to engage in resource mobilization they have to:

    1. Ensure that the articles of association / constitutions that they operate under provides for such activities.

    2. Get the governments to recognize them as charities (this is generally done by conforming to already existing legislation or you would need an act of parliament or for parliament to pass new legislation to facilitate this).

    3. Once you are registered as a charity that qualify for fund raising which is tax free you can look at the spectrum of resource mobilization activities which are at your disposal.

    Fund raising activities in general falls in to the following broad categories.

    1. Cause / Issue based (HIV/AIDS, TB, Child Labour, etc.).
    2. Event based (Tsunami, War, Earthquake, etc.).
    3. Faith based donations to religiously affiliated organizations
    4. Bi-lateral funds.
    5. Multi-lateral funds

    There is however another resource mobilization strategy which is “Income Generation Projects” which is: an organization (NGO) can engage in commercial activities such as training, providing a chargeable service, renting of assets, producing some products etc. to generate a profit. This profit is then used for development activities.

    If an organization (NGO) wants to use this strategy they need to ensure that the articles of association / constitutions as well as the legislation / act of parliament clearly addresses’ this activity. Otherwise an organization may become liable for income tax. This risk may jeopardize the sustainability of the organization; therefore careful consideration must be given to the legal landscape before engaging in such activities.

    However my client has started several “Income Generation Projects” without considering the above. There is a huge risk associated with this and no remedial action is being taken.

    As for the income generation projects, they seem to have been started based on good ideas and not based on the profit they can earn to sustain a development project or a part of a project. Further they are being executed by the same staff taken to deliver development services (who by the way have no business skills) to the target groups; needless to say that the “Income Generation Projects” are doing poorly. They are hardly making profits some are making huge losses. In some cases, not only are they making losses, but they have very high turnovers which go beyond the value added tax threshold (VAT). This is a huge risk for the organization.

    The assignment was well received by the client and they have already engaged me for a follow up assignment to develop realistic business plans for the “Income Generation Projects”.

    Yapahuwa is a historic / archaeological town which boasts the second rock fortress of Sri Lankan kings. It is close to many not so famous archaeological sites and now boasts a new hotel – Yapahuwa Paradise. I recommend a visit to Yapahuwa if ever you are in the north west of Sri Lanka.

    WORKOUT ANYTIME on CNN Money

    WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

    What’s next for Blockbuster’s empty stores
    By: Patrick deHahn

    Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

    Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

    (Read More)

    BEAUTIFUL INTERIORS STYLE FROM SHH

    SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS STYLE FROM SHH

    BEAUTIFUL INTERIORS STYLE FROM SHH

    BEAUTIFUL INTERIORS DESIGN FROM SHH

    BEAUTIFUL INTERIORS DESIGN FROM SHH

    The Question of Alcohol in you Diet

    Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

    Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

    A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

    Diet Start

    Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

    Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

    Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

    These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

    These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

    How I Decluttered my Inbox

    I try out new apps constantly, but it is rare that I find one that I consider a game-changer — one that revolutionizes how I do something and boosts my productivity.

    Meet Mailbox.

    Mailbox works with iOS mobile devices (iPhones, iPads) and GMail, and it can handle multiple GMail accounts. The idea is that your email box should always have ZERO messages in it, and it helps you achieve that goal by giving you four options for each message in your inbox.

    Big-swipe to the left: Add to list

    So many of the emails that I receive are ones that I don’t need to respond to immediately, and Mailbox understands that by allowing you to file messages as low-priority action items. It has three main lists:

    • To Read — great for newsletters and other items you’re interested in reading at some point but not necessarily the second that it arrives in your inbox
    • To Watch — my husband and some friends will sometimes send me YouTube videos that I can’t watch at work — not because they’re NSFW, but because YouTube is categorically blocked at my school. These videos also tend to be low-priority items.
    • To Do — emails of things to add to my “to do” list

    It also gives you the option of creating additional lists. I made the “To Buy” list, for example, for items like subscription services that are going to expire sometime soon that I need to renew or for wishlist items that I’m thinking about buying someday. 

    Short swipe to the left: Defer

    Sometimes I receive messages that I want to deal with, but not at the time I’ve received it. When I’m using my iPhone, for example, I rarely respond to email because I prefer typing on my laptop. Some emails are ones that I’ll look at more closely at night or over the weekend when I have more time. Other emails are ones that I want to deal with at a specific future time or date. Consider these examples:

    • a coupon for a clothing store that I might use but is only valid for a certain week in the future
    • a confirmation email for an upcoming trip or conference

    The beauty of the Mailbox app is that you can set the exact date and time when you want that message to reappear in your inbox by letting you “Pick Date.”

    The message will reappear in your inbox at the date/time you specify so it can get your attention rather than just getting pushed to the depths of your inbox to be forgotten.

    Short swipe to the right: Archive the message
    I might want to look for it someday, but it’s not something I need to act on.

    Long swipe to the right: Trash the message

    Mailbox is a free app in the iTunes store, and in the three weeks that I’ve had it, it has replaced the default Mail app on my iPhone and completely changed the way that I manage email. I’ve gone from having literally 1,000s of emails in my inbox to having ZERO. It’s the first time I’ve ever felt like I’ve been on top of my email situation.

    The iPad version just came out this week, and I’m using that a lot, too. It has a larger interface, but all of the same features. Here’s a screenshot of it on my iPad:

    You can see that I have one message in my inbox — a coupon that I have to use this weekend if I’m going to use it at all. I’ve deferred 14 messages — some that I’ll reply to on Tuesday, others that I want to deal with once I’m completely done with school on Thursday. I’ve got some lists, but I can also check the archive or the trash in case I accidentally swipe something into the wrong place and want to move it back out.

    If you click on a message in your inbox, an image of it will appear on the right so you can decide what to do with it. It’s a very easy-to-use and intuitive app, and now that I have it, I can’t imagine giving it up. It’s a huge asset to my productivity, and my only wish is that I could use this with other email platforms — like my school/work emails — that aren’t GMail accounts.

    Have you tried Mailbox yet? I’d love to hear about how you manage email productivity in the comments below.

    Hope you’re having a great Memorial Day weekend!

    The Easiest Way to Implement a Classroom Economy

    As my life continues to get crazier, I am constantly looking for ways to simplify and improve the things that I do. This year, for example, I decided to merge Class Dojo with my classroom economy, and so far, it’s going very well! Here are some of the tweaks I made to make this merger work.

    My Classroom Economy

    I’ve been using a classroom economy since I started teaching, and every year, I make a few tweaks. The basic idea is that every student applies for a class job at the beginning of each term (our terms are 6 weeks long). I’ve previously posted about my classroom jobs here. I display the jobs in my classroom so that we’re constantly reminded who is responsible for what. This year, I’ve used a pocket chart for my classroom jobs (sorry for the blurry photo).

    I used to give students $100/week as their salary, or about $20 per day. They’d have weekly and monthly expenses, and then they could use any remaining money to purchase items in our class store. The complete program is detailed in my Classroom Economy Megapack on TpT.

    I love the system, but I felt like I wasn’t as consistent as I wanted to be in tracking student behaviors to give fines or bonuses, and there were many Friday afternoons when I was so involved in whatever we were working on that day, that I just didn’t leave enough time for them to shop. 
    Meanwhile, I was dabbling with Class Dojo, and I wanted to figure out a way to tie that in as well. If you’re not already familiar, Class Dojo is an online behavior management system that allows you to give and take away points from students. You can create your own categories for points, and you can access the class info from any device — laptop, computer, iPad, iPhone, etc. I liked that portability because I always have one of those devices in my hands, and I could give or take away points without really interrupting what I was doing. 
    The solution came for me this year when Class Dojo allowed for the creation of weighted point values! Before, you could only give or take away a single point at a time. Now you can create points on a scale of 1-5 and weight particular behaviors accordingly. This is done in the set-up for behaviors. 
    1. Go to Edit Class on your class screen and select “Edit students and behaviors.”


    2. Select “Behaviors” and either click on one of the exiting behaviors, or the plus symbol to customize the behaviors.


    3. Change the icon (optional), name or rename the behavior, and then click the box to access a pull down menu of point values to weight that item.

    And that’s it! You can weight both the positive and negative behaviors according to your needs. Here are the settings I have now for my classroom economy.

    I basically divided the $100 weekly salary by 10, and scaled everything else back the same way. Students now get 2 points daily for their salary (10 points per week) and bonuses for different behaviors. The only other positive behavior that I’ve weighted more currently is helping others because I’m really trying to encourage that in my classroom. I’m also going to add a +4 for a class compliment because I like when they do a good job with other adults in the building.

    For negative behaviors, I deduct more points for breaking rules outside of my classroom and for disrespecting people or materials. I also now deduct their taxes and rent through Class Dojo, and when they shop, I deduct their points in here. I price everything in multiples of 2, but then I found that I wanted a -5 shopping once they had enough points for some of the larger ticket items in our class store. I dislike that it shows up in the “Needs Work” tab, but I don’t think it’s a problem overall. The parents know what is happening from the descriptors, and we just talk about it in class from the stance of making or spending money. It’s the easiest way to deduct some points without resetting the points entirely.

    Since transitioning to this modified system 7 weeks ago, my classroom economy has become more accurate and effective in a fraction of the instructional time. Class Dojo has replaced the clip chart that I used to use, and it helps with some of the accounting. I’m still using the bulk of the resources from my Classroom Economy Megapack, however.

    If you’re interested in trying out Class Dojo with the rest of my Classroom Economy Megapack, I’ll be offering the product on sale at half price through Tuesday. It is one of my best sellers, and if you’re looking to change up your classroom management routines or enhance your existing classroom economy, I don’t think you’ll be disappointed. I’ve also discounted the rest of my TpT store 20% to celebrate my return to blogging after a busy start to the school year. Those sale prices will go now through Tuesday, so check them out!

    Join the Mailing List! 

    Did you know that I have a mailing list so that you’ll never have to miss a post? Use the link at the top right of this page (under Never Miss a Post) to subscribe to my mailing list. You’ll get my posts delivered to your inbox, and you’ll also get access to some extra resources that I’ll be offering to my mailing list only. Given that my PhD work has really cut in to my blogging time this past year, the mailing list is the best way to make sure you see my new content. I promise not to spam you or share your contact information ever. 
    Have a great week!

    Quality Test – MSI Afterburner’s MJPEG Implementation (Part I) with Hitman: Absolution (Ultra Settings, 1080p)

    Update: Added screenshot example of the RTV1 codec ‘color banding’ issue, with circled areas¹**
    Update: Added Quality Test Comparison (Four 1080p samples of Hitman:Absolution) at different Quality Settings²**

    Recording with the MJPEG (Motion JPEG) codec, every frame is an independent ‘Keyframe ‘or ‘I-Frame’ (short for “Information Frame”), which means it is a type of frame that can be ‘cut’ or started from in video editing programs (technically, every frame is a JPG picture!). This also allows for faster seeking and rendering in editing applications. MJPEG also requires less overhead (better performance/less ‘lag’ while recording) than many codecs. As well, the audio captured is PCM (“Uncompressed”) with MSI’s Afterburner, which means that any video editor should be able to recognize the sound data. Errors in programs like Virtualdub saying “Error initializing audio stream decompression” or Sony’s Vegas showing “Stream attributes could not be determined” will not occur and these will open the audio without associated problems.

    Testing out MSI’s Afterburner as a game recorder and using the built-in MJPEG codec that comes with the program, I fired up some Hitman: Absolution, turned up everything to Ultra, captured some clips and put them together, uploaded it to YouTube, and collected some results with everyone:

    This video compilation is a test of a few things:
    1) Hitman: Absolution’s performance while maxed out (Ultra Settings in game Options)
    2) Capture quality of MSI Afterburner and performance/lag of using it
    3) H.264/AVC compression quality maintainability
    4) Youtube’s quality maintainability

    Recorded with:
    MSI Afterburner
    – v.2.3.0
    – MJPEG codec, “Full Frame”, 80% quality, 30fps
    – Audio automatically records into PCM (“Uncompressed”) format

    Recorded Game: 
    Hitman: Absolution @ 1920×1080 (1080p)
    – “Ultra” settings (Preset)
    – Anisotropic Filtering set to 4xAA
    – “Texture Filtering Quality” set to High Quality (i.e.Off/NoFiltering) in Control Center

    – “Morphological” Anti-Aliasing (MLAA) setting (AMD/ATi) set to ON
    – “Surface Format Optimization” set to OFF in Control Center (AMD/ATi)

    Framerate while not recording: ~31-79fps
    Framerate while recording: ~28-64fps

    I chose some Hitman: Absolution clips for a Quality Test because it was a good example of a recent game (at the time of this writing) that includes both fast movement/action areas on the screen, as well as slow/non-moving parts, including text. It has lots of dark and light areas, high contrast edges, particles (rain/filmgrain/sparks,etc) and tests area panning as well.
    I was impressed with MSI Afterburner and it’s utilization of the MJPEG codec overall. It seems to be slightly optimized or tweaked somewhat. At 80% Quality (to be in the realm of comparison with Bandicam’s MJPEG Preset Default of ‘Quality80’), flatter/darker parts were not overly compressed – which would create excessive macroblocking and/or be too smoothed out, normally. This could be partially due to the ‘Film Grain’ effect within the game, however (seen mainly when the sky or a flat-coloured background is in view).
    In other words, there was very little Gibbs Effects aka ‘Ringing’ (“mosquito noise”) around elements such as text when onscreen, and what effects were there, were ‘hidden’ somewhat by the grain effect. You had to look closely to see it, which is still pretty good for not recording in a 100% Quality setting – but again, the ‘Film Grain’ effect in this game is contributing to this ‘negative effect of the MJPEG codec’ not being as visible.

    A small amount of Gibbs Effects/Mosquito Noise/Ringing can be seen around and within the UPC symbol  from this frame taken out of the original MJPEG recording. It is about as visible and even seems to be less so in the video itself, due to the “Film Grain” effect present in the game helping to hide it. Click to see Full Size

    The very small amount of color banding present in the original recording was somewhat generated by the Game Engine and there is very little of it (what does occur is hidden somewhat with the film grain effect the game has).
    In the recorded output, thankfully there is very little, partially because of a higher-quality setting when used and how MJPEG codec handles color dithering; color banding usually won’t be seen very much at higher bitrate/quality settings (which means low compression), but will be easily seen at lower bitrate/quality settings (which uses higher compression).
    Keeping above 80% quality when recording with the MJPEG codec [I recommend recording at 90% if your system can handle it, as most games do not have the Film Grain effect present in Absolution to help hide compression artifacts, such as color banding, flat color/area macroblocks and Gibbs Effects] if you have the space, it should leave you satisfied with easily-editable captures.

    ²**Quality Test Comparison – Four examples of various Quality Settings (90%, 70%, 50% and 30%) when using MSI Afterburner’s MJPEG Codec in Hitman: Absolution. The differences are most apparent in the middle section, the bricks that the police officer is standing on, and the people milling around to the left of the gazebo, both areas showing colour loss (Posterization) and detail loss (Quantization), more obvious in the 30% sample (bottom). All sources were original output frame extractions from 1080p recordings.
    Click to see Full size

    [A quick note here that MSI Afterburner’s output/recording seems to be somewhat darker than other game recording programs. It even states this in it’s own Options, “captured video may appear darker than you see it while gaming” and offers a checkbox that will apply Gamma Correction. Since this article is more about MSI’s MJPEG optimization and utilization (performance and ability to maintain visible quality), this ‘darker recording’ will be explored further in a future Game Recorder Comparison article]

    For people trying out any game recording software and finding your recordings are choppy/laggy on playback (that is, when you are looking at the generated/recorded file), you should find that if you use a player/viewer that has Acceleration (GPU, videocard, DirectX processing), it should play back much more smoothly. If your system does not have this option, you can also try converting what is captured to another file temporarily, one with a smaller bitrate/size, and you should then find it will play back that converted file just fine (especially when recording with lossless/high-bitrate codecs).



    It was interesting to do some side recording with Afterburner’s included RTV1 codec as well*
    The Riva Tuner Video codec is an iteration related to older codecs such as Indeo Video and S3TC compression techniques. It is similar to MJPEG and it seems to have very little effect on performance while recording – even performing slightly better than MJPEG at times, which was a nice surprise. Unfortunately, it suffers from ‘color banding’ (Color Quantization/Posterization) and the result is apparent lower quality, even at high bitrate/quality settings. Although it may not be as obvious in the below comparisons (depending on the settings of your monitor/colors/brightness), and while it certainly does not ‘destroy the quality overall’ in the game recording, in the captured video the color banding can be very distracting, especially when it includes motion through the color and light changes in an area as you move through it [it may not be to everyone, of course]. The size of the file produced is quite a bit larger than when recording with the MJPEG codec as well, but more on that in a future article..

    *As this article is mainly a Test of Afterburner’s usage of the MJPEG codec, a future Game Recorder Comparison article will include the RTV1 codec found in MSI’s Afterburner and cover it in more detail than here

    ¹**An example of the RTV1 codec’s problem with Color Quantization (‘color banding’). This frame is extracted directly from a 100% Quality RTV1 codec recording (Batman: Arkham City Benchmark @ 1080p). The areas that contain the most obvious color banding problem have been highlighted with green circles.

    If you are having problems with Color Banding that is not in the game itself, try to use a higher-bitrate setting (higher quality) for the codec you are recording with, resulting in lower compression and lowered loss of details, if you can do so.
    [With the RTV1 codec, it appears that it will still remain a little, no matter what…]


    Getting back to MJPEG testing with Afterburner, framerate was maintained close to non-recording performance (at ~30-60+fps for this game) when recording. I usually used MSI’s Afterburner only as a monitor/controller for the videocards installed and captured with another program such as FRAPS or Bandicam. Using MSI Afterburner alone and having to run one less application in the background to capture no doubt had at least some sort of streamlining affect on performance. It felt that way, slightly.

    Clear, crisp textures can be seen in this frame taken from the original MJPEG capture.
    MSI’s Afterburner and it’s utilization of the MJPEG codec seems to be even slightly superior to Bandicam’s implementation of it. [Hmm..something that must soon be tested!]
    Click to see Full Size

    The Average bitrate of the original MJPEG captures was about 30Mbps up to 70Mbps, which meant a writing stream to the disk of up to 8MB/s, which almost any hard drive can handle (recorded onto a drive capable of 150MB/s at the time).
    The original generated recording files were about twice the bitrate and size of the final MPEG-4 compressed file uploaded to YouTube, the final file weighing in at about 600MB with a bitstream of 25Mbps on average (it is assumed that almost everyone will compress recorded material into a final output video compilation file of 8-20Mbps or so, for uploading to YouTube/Vimeo/etc (Blu-Ray’s standard bitrate is 36Mbps and most video editing application presets go up to 20Mbps by default).
    This final utilized bitrate, with the efficiency of H.264/AVC, manages to keep most of the detail that was in the original MJPEG recordings, although sadly, most of the finer detail is lost after uploading, as can be seen in the screenshot comparison below:

    Originally used in an earlier article testing out MJPEG on Diablo3 with Bandicam, this screenshot shows examples of the detail loss after uploading to YouTube, when the video is played back at 1080p and 720p. Click to see Full Size 

    What was more disappointing was that YouTube feels the need to overly re-compress uploads. Much of the quality is lost, especially things like the film grain, one of the ‘first things to go’ in temporal video recompression. For instance, at 1:03-1:08 there is visible grain effect maintained in the settings I chose for the final compressed output file, keeping most of the grain from the original MJPEG recording from Afterburner. In the YouTube Video Player after uploading, it can be seen that much of that grain is lost. Another example of this is the dense cornfield against the much flatter sky textures at 1:30-1:36. I kept the complexity of the cornstalks and hard contrasts of the plant details versus the sky on purpose, yet after YouTube’s recompressing of the video, the result is blurred and smoothed details that were not like that in the recorded MJPEG video or the final H.264/AVC high-quality video output/final compress. I will attempt other uploads of the data at various settings for experimentation and put it just below this paragraph when an upload does not lose much of the finer details I wish to share**. I understand they must do it to save space (no doubt people upload huge, ‘FRAPS-original’ size files and recordings sometimes), it is merely unfortunate. At least it then becomes an example of what happens to some of the quality and detail once uploaded to YouTube (the extracted frame above, for example, is from the original MJPEG recording produced by Afterburner). There seems to be no use, at this time, to attempt to upload extremely high quality/fine detail. 

     The file originally uploaded to YouTube, the results of the MSI/MJPEG Quality Test, was previously compressed with a bitrate of 25Mbps. While this bitrate, using high-quality H.264/AVC codec settings, was enough to maintain details such as Film Grain and high contrast edges, much of this detail was lost after YouTube recompressed the uploaded file. 

    **Another, higher-bitrate excerpt [in an attempt to compensate for YouTube’s recompression] of the original MSI/MJPEG video capture:

    This video then, is an attempt to compensate for YouTube’s recompression and data loss, by uploading a video stream with a very high bitrate (an average of 60Mbps, up to 80Mbps, higher even than the original recorded data). As such, the duration is much smaller, a mere excerpt of the original intended upload.

    Result: Even when a video stream is uploaded with the much higher bitrate, even when the original captured file is uploaded, even when I rendered the capture to a 2160p (4K UltraHD) file and uploaded that to YouTube, YouTube’s recompression of the uploaded material (while still watchable) loses far too much detail from the actual upload – at least for high-detail evaluation of a game recorder’s produced video streams. This is unfortunate. For now then, I will try to always show frames (screenshots) extracted from the original captured files created by game recording applications in Quality Tests…

    Turning up the Recording Quality setting to 100%, the bitrate for MJPEG jumps up to over 275Mbps (over 30MB a second of file size being written to the drive). Quite a jump – and at that bitrate, the size becomes comparable to a YUV codec (or a FRAPS 1080p half-size recording) easily – but the quality ramps up as well. Color dithering and loss of detail is surprisingly near-negligible at 100% Quality with this game, yet the resource demand for using the MJPEG codec [especially MSI’s optimization of it] seems to remain small, as MJPEG was already a lightweight codec with somewhat smaller processing being done, to begin with. Today’s powerful videocards and CPU’s should be capable of pumping out a sequence of lightly compressed JPEG’s in a single file [no pun intended] without breaking a sweat. As long as your system isn’t chugging along already, adding some MJPEG capturing shouldn’t affect it very much. For those of you with slightly older systems with trouble recording in other codecs, give MJPEG a try, it should record smoother for you.

    Overall, well done MSI.  /clap

    If anyone is looking for a completely free Game Recording program (it might have even come on a disc with your videocard, as mine did) look no further than MSI’s Afterburner. Keeping the settings relatively high [especially with the MJPEG codec, to keep compression artifacts low] and/or doing your own tests to see what looks ‘good enough’ for you, I suspect many people will be happy (if you aren’t already) with using Afterburner and the low-resource-demanding and editing-friendly MJPEG codec to record your gaming adventures.

    Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – do a few short tests and use what you prefer.

    Have fun recording with MSI Afterburner and the MJPEG codec – and See you in the games!




    [Note: As noted throughout this article, this testing of MJPEG with Hitman:Absolution alone is not a full test of MJPEG quality maintenance potential, as this game utilizes a “Film Grain” effect, which hides some of MJPEG’s weaknesses in maintaining Quality. In a future post (Part II), a more in-depth examination of MJPEG as a video game recording codec, using other games and utilities, will be actualized. See you then!]

    The Amazing Power of Focus

    I frequently like to put on music while I work, and I sometimes do that in my classroom, too. I’ve rotated through many Pandora playlists, and I use Spotify a fair amount. I like the music on those sites, but they’re more for entertainment than work.

    I’ve finally found a resource that really seems to help me and my students get into the zone and focus.

    Let me introduce you to my favorite new website, [email protected]

    This website allows you to listen to instrumental music from a variety of genres that has been specially selected to get you into a state of “flow.” The music is sequenced in an order that draws on neuroscience and research about the impacts of music on productivity. They have a huge section documenting the science behind the playlists. 
    I tried this site while reading some really dense texts for a PhD class, and I really felt like it helped me stay focused and productive. I cruised through the articles in record time! I also had it playing while I worked on writing this morning, and I do feel like it’s impacting my personal productivity. It seems to be helping my students as well. 
    They have two membership levels — a free version and a paid version. The free version gives you 60 minutes of each playlist before stopping. You can listen to the playlists multiple times, but it will always be the same playlists. The paid version allows you to set a timer, customize playlists, listen to unlimited music, and track productivity for $4.99 billed monthly or $45 billed annually. I’m currently using the free version, but I suspect it won’t be long before I upgrade. It’s having a big impact on my productivity. 
    If you like to have music on in the background while you or your students work, I’d definitely recommend giving [email protected] a try. I’d love to hear about your experiences with it in the comments!

    I like www.focusatwill.com so much that I’ve become an affiliate with the site. This means that if you click the links above and subscribe, I’ll receive a very small commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

    You can view the full article here. 

    Trip to Hyderabad Cont….

    Well there are scheduling issues so will go to get my ticket & visa on thursday. Everything else is back on schedule. Trying to contact some of my friends who are in India so that we may be able to meet over there.

    I have been doing this job since 2002 and travelling overseas since then; however this trip will be my first time on a budget airline. Dont know what to expect? When I got my online booking it said Meal – To be purchased. some how flying and buying your food did not sound OK to me. I am sure that what ever my first choice is it will be over by the time the airline staff get to me.

    Anyway need to finish up all the stuff for today to be able to watch the opening match between Sri Lanka & South frica (ICC Trophy)

    The weight question

    ‘Those desiring to lose weight should perform hard work before food. They should take their meals after exertion and while still panting from fatigue … They should, moreover, eat only once a day and take no baths and sleep on a hard bed and walk naked as long as possible.’

    Theories on the weight-loss benefits of walking around naked and not bathing have not been proven, but Hippocrates’ other dietary advice isn’t completely off the wall and shows that even 2,400 years ago, the relationship between food intake and energy expenditure was recognized.

    Diet Start

    Today ‘obesity’ is becoming universally recognized as a disease in its own right. Obese and overweight are terms that are often used interchangeably, but let’s clarify the difference between them:

    ¨ Overweight refers to an excess of body weight and includes all tissues, such as fat, bone and muscle, but not just excess body fat.

    ¨ Obese means that someone is carrying an excessively high proportion of body fat that could compromise their health.

    If you are an athlete or body-builder, you may weigh more than the desirable weight range for your height, but this is normal because muscle weighs more than fat. Equally, you may be a relatively sedentary person who weighs in at the correct weight for your height, but who still carries too high a proportion of body fat. In this case, a good exercise programme is vital.

    For those of you who feel that you are more ‘lard’ than ‘hard’, and don’t like what you are seeing on the scales, a better way of calculating just how overweight you are is by working out your Body Mass Index (BMI).

    You can tell if you have surplus body fat simply by seeing if you can pinch more than 2.5cm (1 in) on your hips, tummy, underarms and back.

    Alternatively, get your doctor or gym instructor to check out your BMI using callipers, or buy a set yourself from your local pharmacy. If you have more than 25 per cent body fat, then the chances are that you are carrying too much weight, or at the very least need to change your diet and participate in exercise that will burn fat and build muscle.

    Successful weight loss and healthy weight management depend on sensible goals and expectations – losing just 5-10 per cent of your weight is the kind of goal that can help improve your health.

    You may be wondering how you have got this far without hearing about calories. But you don’t need to become obsessed with the calorific value of everything you put in your mouth. Instead, it is much better to check food labels to see if the food contains unnecessary additives, sugar, hydrogenated fats and salt – and, of course, how high the carbohydrate content is.

    Tempura Mazel

    Tempura is a Japanese dish. Tidbits are dipped in a batter of flour, water, and egg yolk, sizzled to golden in hot fat (by all means, use your wok for this if you have one), drained, and artistically arranged and served, usually on a doily-lined flat basket. The consistency of the batter (which must be neither too thick nor too thin) and the temperature of the oil (350° is just right) are of the utmost importance. Tempura cannot wait; it must go directly from wok to table.

    Diet Start

    • 5 asparagus, cut into 2 or 3
      long diagonal pieces
    • 1-2 large carrots, sliced 1/4″ thick on diagonal
    • 10 green beans, ends trimmed
    • 2 small zucchini, cut into thick sticks
    • 1 bell pepper, cut into strips, pith and seeds removed
    • 6 shitake mushrooms, soaked in warm water
    • 6 large parsley sprigs, stems removed, dried
    • 4 Nori seaweed, cut into quarters (available in Japanese markets)

    Clean and cut vegetables; make certain they are dry.

    Batter:

    • Ice water
    • 21/4 cups flour
    • 3 egg yolks
    • 11/2 quarts safflower oil (more if using sauté pan)

    Gradually add ice water to flour with a whisk till mixture is the consistency of heavy cream. Beat yolks and whisk into mixture.

    Heat oil to 350° in wok or large sauté pan. Dip vegetables into batter and fry till golden (1-2 minutes). Do not crowd pan. Drain.

    Chilis Mazel

    • 6 fresh green chilis
    • 1 recipe Mazel Cheese Mexican, warmed
    • Ice water
    • 3/4 cup flour
    • 1 egg yolk
    • Safflower oil to deep fry (about 11/2 qts.)
    • 1 recipe of cooked Salsa Mazel

    Slit chilis lengthwise, just long enough to stuff with Mazel Cheese Mexican. Clean out seeds, etc. Stuff with Mazel Cheese mixture and set aside.

    Gently whisk enough ice water into flour to make it about the consistency of heavy cream. Beat yolk with a fork, then whisk into batter.

    Heat oil to 350°. Dip each chili into batter. Cook in oil till golden (1-2 minutes)

    Drain on paper towels.

    Served cooked salsa over chilis.

    YIELD: 2 servings.

    The timing on deep frying is difficult to pinpoint. Variables include size of pan, the amount of oil used, temperature of oil, desired color of finished product, etc. Do not crowd pan.

    The carbohydrate jewels

    By upping your intake of low GI fruit and vegetables, you will not only be on your way to becoming leaner, but you will have a profound effect on your health. The amazing phytonutrients (plant nutrients) that you find in brightly coloured raw organic fruit and vegetables are clever little substances that can protect you from ill health in various ways, although many people’s diets are sadly lacking in them.

    Phytonutrients can help regulate the immune system, stabilize vitamins in body tissues and protect from serious illnesses, such as such as cancer. They do this by working as antioxidants alongside vitamins A, C, E and D, and the minerals, selenium and zinc. As a team, these powerful compounds have the ability to slow down the damaging oxidative process caused by those ‘enemies of a healthy state’, the free radicals. Antioxidants can also rid the body of these free radicals, which are the natural waste products of metabolism, which, if left unchecked, can lead to degenerative disease, by causing imbalances on a cellular level.

    Diet Start

    Take note that these free radicals are also found in overheated oils and fried foods, another good reason to kiss junk food good bye.

    They aren’t classed as essential nutrients, but without phytonutrients your sense of wellness would be severely compromised.

    They work in the body at deep physiological and biochemical levels, and luckily enough are to be found in low-density/low GI fruit and vegetables. Eating these raw wherever possible is the key to maximizing their life- enhancing qualities. Cooking destroys many of the benefits that you will reap if you include a colourful array of energy-boosting raw fruit and vegetables in your daily diet.

    Life is a balancing act

    So now you have a better understanding of the impact that the wrong carbohydrates can have on your body, and have established that you need to incorporate more of the colourful and low GI fibrous fruit and vegetables in your diet. But man cannot live by carbohydrates alone. You will have to take a close look at the two other macronutrients that work hand-in-hand with carbohydrates to provide energy and nourish the body: protein and fats.

    The key to balancing blood-sugar levels, banishing insulin resistance and losing excess weight lies in successfully balancing these three macronutrients.

    And More: The EULA Keeps Popping Up When Starting Sony’s Vegas Video Editing Applications (FIX)

    Since the most popular answer on the ongoing poll I have running here at the blog (“what type of posts would you like to see more of in 2014” [top right, it will run until the middle of the year]) is “Tips And Tricks Of Video Capturing And Editing”, I thought I would start more of these types of requested posts by sharing this fix for a problem that seems to pop up intermittently with Sony’s Vegas line of products.

    Whether you have just re-installed it or whether it has been on your system for a while, ‘something’ is causing the EULA (End User License Agreement) to pop up and require you to agree to it, even if you have already done so and/or Registered the program. This question comes up once in a while on the Sony Creative Software Official Forums and I have seen it elsewhere. I was recently reminded of it again because it is also something that just happened to me on my system! I didn’t re-install Vegas or make any large changes related to Vegas, yet this little guy started popping-up every time I started up Vegas Movie Studio HD**: